• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1998

Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.77-87
• /
• 2018

Traffic Density is the most important of the three primary macroscopic traffic stream parameters, because it is most directly related to traffic demand(Traffic Engineering, 2004). It is defined as the number of existing vehicles within a given distance at a certain time. However, due to weather, road conditions, and cost issues, collecting density directly on the field is difficult. This makes studies of density less actively than those of traffic volume or velocity. For these reasons, there is insufficient attempts on divers collecting methods or researches on the accuracy of measured values. In this paper, we used the 'Density Measuring System' based on the synthesise technology of several camera images as a method to measure density. The collected density value by the 'Density Mesuring System' is selected as the true value based on the density define, and this value was compared with the density calculated by the traditional measurement methods. As a result of the comparison, the density value using the fundamental equation method is the closest to the true value as RMSE shows 1.8 to 2.5. In addition, we investigated some issues that can be overlooked easily such as the collecting interval to be considered on collecting density directly by calculating the moment density and the average density. Despite the actual traffic situation of the experiment site is LOS B, it is difficult to judge the real traffic situation because the moment density values per second are observed max 16.0 (veh/km) to min 2.0 (veh/km). However, the average density measured for 15 minutes at 30-second intervals was 8.3-7.9 (veh/km) and it indicates precisely LOS B.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2001

In this paper, we propose an algorithm which estimates the displacements and velocities of objects in the soccer field from the soccer image sequences. Assuming the time interval of an object movement is given, we transform the object positions into those in the soccer field model and compute the distance and the velocity. When four corresponding pairs of the feature points, such as the crossing points of the lines in the soccer field, exist and three of them are not on a line, we transform the object positions in the soccer image into those in the soccer field by using the perspective displacement field model. In addition, when the soccer image has less than four feature points, we first transform the object positions into those in the image which has more than four feature points, and then transform the positions into those in the soccer field again. To find the coordinate transformation between two images, we estimate the panning and zooming for consecutive images in the sequence. In the experimental results, we quantitatively evaluated the estimation accuracy by applying our algorithm to the synthetic. soccer image sequences generated by graphic tools, and applied it to the real soccer image sequences for broadcasting to show its usefulness.

• The Journal of Internal Korean Medicine
• /
• v.41 no.2
• /
• pp.194-203
• /
• 2020

Objectives: This study aimed to compare the gait patterns of cerebellar infarction patients with those of corticospinal tract stroke patients through a follow-up of patients with ataxic gait due to cerebellar infarction and corticospinal tract stroke. Methods: We investigated two cases of patients with cerebellar infarction and two cases each of acute or chronic corticospinal tract stroke who were hospitalized at Wonkwang University Gawangju Medical Center from September 1, 2017 to February 15, 2020 based on medical records and gait analyses. The spatiotemporal gait parameters of each patient were measured three times at 2-week intervals except those of the chronic corticospinal tract stroke patients, which were measured twice at a 1-month interval. Results: Spatiotemporal gait parameters, which include velocity, cadence, step length, stride length, and single support, were consistently increased in the cerebellar infarction patients in comparison to the corticospinal tract stroke patients. The stance phase was decreased in all the patients. Conclusions: The cerebellar infarction patients' gait spatiotemporal parameters were found to consistently improve. Moreover, gait analysis can be used to effectively measure improvement of ataxic gait.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.127-136
• /
• 2020

Purpose: This study aimed to establish a basis for application time and cold therapy interval by checking the physiological changes after applying a cold-gel and ice pack, commonly applied to cold therapy, and after passive rewarming. Method: A total of 22 healthy adults used cold-gel packs and ice packs in a Randomized control group repeated measurement study, and passive rewarming was performed for 40 minutes after 30 minutes of cold therapy. After applying to the right axilla, StO₂, SpO₂, peripheral blood flow, skin and body temperature were measured 15 times every 5 minutes. Result: In the cold-gel pack group, StO₂ decreased from 69.43% to 61.06% after 30 minutes application, and in the ice pack group, StO₂ decreased from 67.66% to 64.80% (p <001). In the cold-gel pack group, skin temperature decreased from 33.57℃ to 29.15℃ after 30 minutes application, and in the ice pack group, skin temperature decreased from 32.64℃ to 28.90℃ (p <.001). Only skin temperature recovered completely after 40 minutes of rewarming. There were insignificant differences between the cold-gel pack and ice pack. Conclusion: When applying cold therapy to the axillary, at least 40 minutes for passive rewarming is necessary after 30 minutes of application.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.472-483
• /
• 2013

Actual maritime exercise for improving the capability of submarine sonar operator leads to a lot of cost and constraints. Sonar simulator maximizes the capability of sonar operator and training effect by solving these problems and simulating a realistic battlefield environment. In this study, a passive sonar simulator algorithm is suggested, where the simulator is divided into three modules: maneuvering module, noise source module, and sound propagation module. Maneuvering module is implemented in three-dimensional coordinate system and time interval is set as the rate of vessel changing course. Noise source module consists of target noise, ocean ambient noise, and self noise. Target noise is divided into modulated/unmodulated and narrowband/broadband signals as their frequency characteristics, and they are applied to ship radiated noise level depending on the vessel tonnage and velocity. Ocean ambient noise is simulated depending on the wind noise considering the waveguide effect and other ambient noise. Self noise is also simulated for flow noise and insertion loss of sonar-dome. The sound propagation module is based on ray propagation, where summation of amplitude, phase, and time delay for each eigen-ray is multiplied by target noise in the frequency domain. Finally, simulated results based on various scenarios are in good agreement with generated noise in the real ocean.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.97-108
• /
• 2012

A Lagrangian particle tracking model coupled with the ECOM3D were used to study on the behavior of fresh water released from the Namgang Dam in terms of residence time in Kangjin Bay, South Sea, Korea. Model was calibrated until skill cores for elevation, velocity, temperature and salinity are satisfied over 85%. In the numerical simulation, particles were released in 1 hour time interval from the northern boundary. The different patterns of particle trajectory are identified under the varying dynamics from tidal to density-driven current. The average residence time of total particles are approximately 65.9 hours in the entire Kangjin Bay. The average residence time were increased from 55~65 to 70~80 hours during maximum discharge period. Discharge rate of fresh water and average residence time in the Kangjin Bay is high correlated with correlation coefficient over 0.81.

• Korean Journal of Environmental Biology
• /
• v.18 no.3
• /
• pp.323-330
• /
• 2000

Early life history and spawning for Odontobutis interrupta were observed in the laboratory during May-August 1999 with a condition of natural habitats in the field. Optimal water temperature for spawning was between 17.5 and 22.$0^{\circ}C$ and appropriate water depth and current velocity in the natural habitat ranged 0.3-0.6 m and 0.1-0.3 m/sec, respectively. Ovary maturation index peaked at about 100mm in the total length and their values gradually decreased after the size. Male fishes showed a territory and courtship behavior to adult females and the males frequently pushed upper-ventral part of females for egg releases. After females spawned, the males guarded the egg masses and supplied dissolved oxygen using pectoral fins. According to observation of egg development in the laboratory, blastodisc formed in 1hr 17 min after the fertilization, cleavaging at 36-minute interval regularly. Blastulation occurred in 7 hr 12 min after the fertilization, with gastrulation after 11 hr 11 mins and formation of york plug after 32 hr 48 min. Embryo was formed in 33 hr 45 min after fertilization and optic vesicles appeared in 47 hr 27 mins when 30-31 somites were formed. Cardiac primordium was formed in 65 hr 15mins and its beat averaged 44- 48 time/min. Pectoral fins were formed in 138 hr 40 min, air-bladder and black vesicles were observed in lower portion of young fish. Embryo hatched from she-11 membrane after about 10 days and juvenile was 5.8$\pm$0.2mm in total length 3.0$\pm$0.5mg in weight.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.213-229
• /
• 2017

Recently, in urban areas there is a tendency to construct more complex network-type tunnels including entrance and exit ramps. At the same time, various one-dimensional programs based on the network theory have been proposed for tunnel ventilation analysis. This paper aims at developing a program that can analyze the ventilation flow rate and pollutants concentration in complex network-type tunnels based on the none hardy-cross method. The flow analysis in the branch was carried out on the basis of the Gradient method, while for the concentration analysis a new logic has been developed to calculate the inflow and outflow concentration automatically in a complex network-type structure. Additionally, in the tunnel segments showing low flow rate, proper grid interval sizes were proposed to reduce numerical error. To verify the applicability of the program, flow rates predicted in the straight tunnels were compared with the classical velocity-diagram method by Stokic and the TVSDM program. The results showed that the errors were within 1%. In addition, the program was applied to the recent ventilation system adopted in the complex network-type urban tunnels.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.67-84
• /
• 2002

A shallow high-resolution seismic reflection survey was carried out at the Mineopo tidal flat on the western coast of Korea. The purpose of the survey was to investigate shallow sedimentary structure of the tidal (fat associated with the recent sea level change. A total of 795 shots were generated at 1 m interval from a 5-kg hammer source and recorded on 48 channels of 100 Hz geophones along two mutually perpendicular profiles. The water-saturated ground condition resulted in suppressed ground rolls by significantly decreasing rigidity. In addition, seismic velocities over 1500 m/s provided easy segregation of reflected arrivals from lower velocity noise. As a consequence, seismic sections were created that are high in resolution and signal to noise ratio as well. The stack sections show that the tidal flat consists of 5 sedimentary sequences above acoustic basement. Although deposition is largely characterized by the transgressive sedimentary facies resulting from sea level rise, erosional surfaces are well-resolved within the sequences.