• 공업화학
• /
• 제5권6호
• /
• pp.1068-1077
• /
• 1994

생분해성 고분자의 실용화 검토를 위하여 생분해성 Copolyesterethylene(CPEE)과 LDPE를 0~100%까지 10% 간격으로 전조성에 걸쳐 용융 블렌드하였다. 각 조성에서 블렌드한 시료의 녹는점 변화, 용융 엔탈피, 결정화 온도 및 결정화 엔탈피를 시차주사열량계고 측정하여 miscibility에 관하여 고찰하였으며 만능시험기를 이용하여 인장강도 및 신장률을 측정하였다. 열분석 결과로부터 CPEE의 조성이 30%일 때까지 약간의 miscibility를 보임을 알 수 있었으며, 인장 강도값으로부터는 CPEE조성이 30~80%를 제외한 조성에서 유용한 compatibility를 갖는 것을 알았다. SEM 관찰을 통한 각 조성에서의 형태학적 모습으로부터 이들 상용성의 결과를 확인하였으며, 또한 CPEE/LDPE 블렌드 각 조성에 대한 생분해성을 미생물 접종 4주 후의 중량감소율을 측정하여 확인하였다.

• 치과방사선
• /
• 제23권1호
• /
• pp.71-85
• /
• 1993

The purpose of the study was to investigate the effects of the single and fractionated irradiation on the microvascular structure of the submandibular gland in rats. For this study, 90 Sprague-Dawley strain rats were irradiated to their neck region with equal split doses of 9Gy for a 4 hours interval and 15Gy single dose by 6MV X-irradiation and sacrificed on the 1st, 3rd, 7th, 14th and 27th day after irradiation. The author observed histological changes at Hematoxylin and Eosin staining and PAS staining under a light microscope, and also observed distribution and structural changes of the microvasculature in rat submandibular gland using a scanning electron microscope by forming vascular resin casting. The results were as follows: 1. In the light microscopic examination, the microvasculature was slightly dilated and decreased in number on the 1st day after irradiation, and increase in number of microvasculature was observed on the 3rd day after irradiation. And then distribution of microvasculature was markedly increased on the 7th day after iradiation, but decreased on th 14th day after irradiation again. Such changes were greater in the single irradiated group than in the fractionated irradiated group. 2. The reaction to PAS staining on glandular cell was decreased on the 1st and the 3rd day after irradiation, and recovered on the 7th day after irradiation. The reaction was decreased on the 14th day after irradiation again, and recovered on the 28th day after irradiation. Changes were more apparent in the single irradiated group. 3. In the scanning electron microscopic examination, early changes of microvasculature were decreased capillary density, dilation of conduits and meandering. Increased capillary dentsity or anastomosis due to vascular reproduction and smooth curved running were observed on the 7th and 14th day after irradiation. Decreased capillary and smooth running tendency were observed on the 28th day after irradiation again. Such changes were greater in the single irradiated group than in the fractionated irradiated group.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.32-36
• /
• 2016

The Cu-based bulk glassy alloys in Cu-Zr-Ti-Ni systems were prepared by means of copper mold casting. The Cu-based bulk glassy alloys samples were tested by X-ray diffractomer (XRD), differential scanning calorimeter, scanning electron microscopy (SEM), Instron testing machine and Vickers hardness instruments. The result indicated that the prepared Cu-Zr-Ti-Ni alloys were bulk glassy alloys. The temperature interval of supercooled liquid region (${\Delta}T_x$) was about 45.48 to 70.98 K for the Cu-Zr-Ti-Ni alloy. The Vickers hardness was up to 565 HV for the $Cu_{50}Zr_{25}Ti_{15}Ni_{10}$ bulk glassy alloy. The $Cu_{50}Zr_{25}Ti_{15}Ni_{10}$ bulk glassy alloys were annealed in order to obtain nanocrystals. The results showed that the Vickers hardness was raise up to 630 HV from 565 HV. As shown in XRD results, the amorphous alloys changed to nanocrystals, which were $Cu_8Zr_3$, $Cu_3Ti_2$ and CuZr, improved the hardness. The SEM analysis showed that the compression fractured morphology of amorphous alloys was brittle fracture, and the fracture morphology after annealing was ductile fracture. This proved that annealing of amorphous to nanocrystals can improve the plasticity and toughness of amorphous alloys.

• 치과방사선
• /
• 제29권1호
• /
• pp.21-32
• /
• 1999

Purpose: To evaluate the effect of variable scanning protocols of computed tomography for evaluation of pre-implant site of the mandible through the comparison of the reformatted cross-sectional images of helical CT scans obtained with various imaging parameters versus those of conventional CT scans. Materials and Methods: A dry mandible was imaged using conventional nonoverlapped CT scans with 1 mm slice thickness and helical CT scans with 1 mm slice thickness and pitches of 1.0, 1.5. 2.0, 2.5 and 3.0. All helical images were reconstructed at reconstruction interval of 1 mm. DentaScan reformatted images were obtained to allow standardized visualization of cross-sectional images of the mandible. The reformatted images were reviewed and measured separately by 4 dental radiologists. The image qualities of continuity of cortical outline. trabecular bone structure and visibility of the mandibular canal were evaluated and the distance between anatomic structures were measured by 4 dental radiologists. Results: On image qualities of continuity of cortical outline. trabecular bone structure and visibility of the mandibular canal and in horizontal measurement. there was no statistically significant difference among conventional and helical scans with pitches of 1.0. 1.5 and 2.0. In vertical measurement. there was no statistically significant difference among the conventional and all imaging parameters of helical CT scans with pitches of 1.0, 1.5, 2.0, 2.5 and 3.0. Conclusion: The images of helical CT scans with 1 mm slice thickness and pitches of 1.0, 1.5 and 2.0 are as good as those of conventional CT scans with 1 mm slice thickness for evaluation of predental implant site of the mandible. Considering the radiation dose and patient comfort, helical CT scans with 1 mm slice thickness and pitch of 2.0 is recommended for evaluation of pre-implant site of the mandible.

• 한국광학회지
• /
• 제31권3호
• /
• pp.125-133
• /
• 2020

본 논문에서는 다변량 분석법과 결합된 레이저 유도 플라즈마 분광법을 사용하여 겹친 유류 지문을 분리하는 혁신적인 방법을 연구하였다. LIPS는 겹친 유류 지문의 화학 성분에 대한 데이터뿐 아니라 실시간 분석 및 고속 스캐닝이 가능한 분광법이다. 레이저 유도 플라즈마 분광법을 통해 도출된 스펙트럼은 적절한 다변량 분석이 적용되어 법의학적 분류와 겹친 유류 지문의 재구성에 유용한 화학적 성분을 제공한다. 본 연구에서는 LIPS 스펙트럼에서 4가지의 유류 지문을 분류하기 위하여, 주성분 분석 방식과 부분 최소 제곱 회귀 분석을 사용하였다. 제안된 방법은 SIMCA 및 PLS-DA와 같은 구별 방식을 사용하여 4개의 유류 지문의 분류를 성공적으로 입증하였다. 본 연구의 결과는 대략 85% 이상의 정확도를 가졌으며, external validation 실험에서도 분류의 가능함을 보였다. 최종적으로, 125 ㎛의 공간 간격으로 레이저 스캐닝 분석을 통한 겹친 유류 지문의 2차원 형태의 분리가 가능함을 입증하였다.

• Imaging Science in Dentistry
• /
• 제35권2호
• /
• pp.97-103
• /
• 2005

Purpose : To determine if ultrasonography is a reliable technique to assess masseter muscle sites within intra- and interobserver and the scanning level and/or the muscle condition affect local cross-sectional dismension (LCSD) measurements of masseter muscle. Materials and Methods : 10 subjects without sign and symptom of temporomandibular disorders and missing posterior teeth were examined by ultrasonography. Bilateral ultrasonographic examinations were performed with a linear (B-scan) 7.5 MHz small-part transducer to register LCSDS of the masseter muscle on three different levels. Scans were made on relaxed and clenching condition. Three oral and maxillofacial radiologists measured at two sessions with a time interval of at least 5 minutes. Results : Variables such as 'condition' and 'level' had a significant effect on muscle measurements (p<0.05). There was no significant difference between 'sessions'(p>0.05) and 'observers' (p>0.05). LCSDS on lower scan level were significantly thinner than those on upper and middle level. Those on clenching condition were significantly thicker than those on relaxed condition (p<0.05). The scanning level with the highest reproducibility was middle with clenching condition (ICC=0.90, $MSE=0.55\%$). Conclusion : The data suggested that ultrasonography was a reliable method for measuring LSCD of masseter muscle in intra- and Interobserver and middle scan level showed the most reliable data.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.74-79
• /
• 2014

전통적인 스캔모드는 과거 Envisat이나 Radarsat 위성 등에서 사용되면서 환경 감시 및 관측 분야에 높은 효율성을 지닌 영상 획득을 수행하였으나 해상도의 저하 및 안테나 패턴의 왜곡으로 인해 영상 품질 저하 문제가 지적되어왔다. 최근 이러한 스캔 모드 영상의 단점을 극복하기 위한 새로운 운용 모드로서 TOPS SAR 기법이 제안되어 운용단계에 접어들었다. TOPS 모드는 단일 위성에서 높은 품질의 광역 관측 레이더 영상을 제공하지만 이를 실제로 구현하기 위해서는 매우 복잡한 시스템 설계 능력이 요구된다. 본 논문에서는 TOPS 모드의 원리에 대해 소개하고, 모의 실험을 통하여 TOPS 모드의 동작을 구현한다. SAR 원시데이터를 가상으로 생성한 후 방위방향 안테나 패턴을 스캔 모드와 비교하여 TOPS 모드에서 스캔모드의 단점인 영상 품질 왜곡이 억제됨을 보인다.

• 한국음향학회지
• /
• 제16권5호
• /
• pp.76-82
• /
• 1997

본 논문은 음원의 절대위치를 정확하게 추정할 수 있는 음향홀로그래픽법에 관하여 계산기상의 시뮬레이션 및 측정시스템을 이용한 실험과결과에 대하여 서술한다. 이 연구에서는 원거리 음장을 만족하도록 측정면을 설정하여 7개의 마이크로폰을 직선으로 배열한다. 음원의 측정은 음원면에 근접한 위치에 한 개의 기준 마이크로폰을 설치하고 측정면의 마이크로폰들을 등간격으로 스캐닝하면서 각지점의 음을 동시 기록한다. 수음한 기준음과 측정음간의 크로스 스펙트럼 알고리즘에 의하여 음원의 절대위치를 측정한다. 그리고 각 마이크로폰의 위상차는 기준 마이크로폰을 대상으로 위상보상 하였으며, 측정시의 시간지연은 제 1열 측정시점을 기준으로 시간보상을 행하였다. 측정면에 설정한 마이크로폰들의 최적 간격은 수치 시뮬레이션에 의하여 정한다. 음원신호는 정현파를 이용하고 S/N비를 30dB의 조건하에서 각각 실험을 행하였다. 시뮬레이션과 실험에서 결정한 최적 마이크로폰 간격은 2KHz인 정현파 음원을 기준으로 하여 공간상의 나이키스트 조건을 만족하도록 설정하였다. 무향실에서 측정한 실험결고, 500Hz 와 1KHz의 신호원에 대한 음원이 2KHz인 경우의 추정된 3차원 홀로그램의 주극폭이 각각 87%와 30%씩 감소하였고, 그 결과 수치 시뮬레이션의 타당성을 확인할 수 있었다. 그러므로 본 연구에서 제안하는 3차원 음향 홀로그래픽법을 이용한 음원위치 추정에 관한 연구의 유용성을 검증하였다.

• Imaging Science in Dentistry
• /
• 제36권2호
• /
• pp.89-94
• /
• 2006

Purpose : To evaluate clinical usefulness of facial soft tissue thickness measurement using 3D computed tomographic images. Materials and Methods : One cadaver that had sound facial soft tissues was chosen for the study. The cadaver was scanned with a Helical CT under following scanning protocols about slice thickness and table speed; 3 mm and 3 mm/sec, 5 mm and 5 mm/sec, 7 mm and 7 mm/sec. The acquired data were reconstructed 1.5, 2.5, 3.5 mm reconstruction interval respectively and the images were transferred to a personal computer. Using a program developed to measure facial soft tissue thickness in 3D image, the facial soft tissue thickness was measured. After the ten-time repeation of the measurement for ten times, repeated measure analysis of variance (ANOVA) was adopted to compare and analyze the measurements using the three scanning protocols. Comparison according to the areas was analyzed by Mann-Whitney test. Results : There were no statistically significant intraobserver differences in the measurements of the facial soft tissue thickness using the three scanning protocols (p>0.05). There were no statistically significant differences between measurements in the 3 mm slice thickness and those in the 5 mm, 7 mm slice thickness (p>0.05). There were statistical differences in the 14 of the total 30 measured points in the 5 mm slice thickness and 22 in the 7 mm slice thickness. Conclusion : The facial soft tissue thickness measurement using 3D images of 7 mm slice thickness is acceptable clinically, but those of 5 mm slice thickness is recommended for the more accurate measurement.

• 한국유기농업학회지
• /
• 제13권3호
• /
• pp.281-289
• /
• 2005

In order to find out an alternative way of analysis of food waste compost, the Near Infrared Reflectance Spectroscopy(NIRS) was used for the compost assessment because the technics has been known as non-detructive, cost-effective and rapid method. One hundred thirty six compost samples were collected from Incheon food waste compost factory at Namdong Indurial Complex. The samples were analyzed for nitrogen, organic matter (OM), ash, P, and K using Kjedahl, ignition method, and acid extraction with spectrophotometer, respectively. The samples were scanned using FOSS NIRSystem of Model 6500 scanning mono-chromator with wavelength from $400\~2,400nm$ at 2nm interval. Modified partial Least Squares(MPLS) was applied to develop the most reliable calibration model between NIR spectra and sample components such as nitrogen, ash, OM, P, and K. The regression was validated using validation set(n=30). Multiple correlation coefficient($R^2$) and standard error of prediction(SEP) for nitrogen, ash, organic matter, OM/N ratio, P and K were 0.87, 0.06, 0.72, 1.07, 0.68, 1.05, 0.89, 0.31, 0.77, 0.06, and 0.64, 0.07, respectively. The results of this experiment indicates that NIRS is reliable analytical method to assess some components of feed waste compost, also suggests that feasibility of NIRS can be Justified in case of various sample collection around the year.