• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.135-139
• /
• 1999

The static softening behavior of AISI 4140 could be characterized by the hot torsion test in the temperature ranges of 10$0^{\circ}C$~120$0^{\circ}C$ and strain rate ranges of 0.05/sec~5/sec. Deformation efficiency which was based on dynamic materials model was calculated from flow stress curves obtained continuous deformation. Interrupted deformation was performed with 2 pass deformation in the pass strain ranges of 0.25{{{{ epsilon _p}}}} ~3{{{{ epsilon _p}}}} and interrupted time ranges of 0.5~100sec. The dependences of process variables pass strain ({{{{ epsilon _i}}}}) stain rate ({{{{ {. } atop {$\varepsilon$ } }}}}) temperature (T) and interpass time ({{{{ {t }_{i } }}}}) on static recrystallization (SRX) and metadynamic recrystallization .(MDRX) could be indicidually predicted from the modified Avrami's equations. Comparison of the softening kinetics between MDRX and SRX showed that the rate of MDRX was more rapid than that of SRX for the same deformation variables. Controlled multipass deformations were performed using deformation efficiency static and metadynamic recrystallization of AISI 4140.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.397-401
• /
• 2002

The combination of interrupted aortic arch and aortopulmonary window is a rare presentation of congenital heart disease, which requires early diagnosis and surgical treatment. We describe a successful one-stage repair of the anomaly through median sternotomy in a 10-day-old neonate weighing 2.46 kg.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1703-1711
• /
• 2010

Electric power utilities are facing increasing uncertainties regarding the economic, political, societal, environmental constraints under they operate and plan their future systems. The utilities have to integrate consumers' interruption cost representing reliability worth of electricity into the process of determining the optimum investment level. In order to do so, the estimated outage cost must be included into quantitative index corresponding to system capital and operation investment cost to establish an optimal expansion plan. This paper is a study on the outage cost assessment by using macro approach for calculating IEAR(Interrupted Energy Assessment Rates) and the TRELSS(Transmission Reliability Evaluation for Large-Scale Systems) program was used to calculate EENS(Expected Energy Not Served).

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.534-540
• /
• 2015

In this paper we propose an analytical model for jitter, wherein we implement the interrupted Poisson process (IPP) for incoming traffic. First, we obtain an analytical model for the jitter on one node with respect to the phase probabilities, traffic load, and tagged traffic share in the aggregate traffic flow. Then, we analyze N-node cases, and propose a model for end-to-end jitter. Our analysis leads to some fast-to-compute approximations that can be used for future network design or admission control. Finally, we validate our analytical results by comparing them with previous results for limit cases, as well as with event-driven simulations. We propose the use of our results as guidelines for jitter evaluation of real IP traffic.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.15-21
• /
• 2000

Rising from a supine position to erect stance is an important milestone in treatment of patients with neurologic dysfunction. The purposes of this study wed to describe the movement patterns that hemiplegic patients use when rising to a standing. position and to investigate whether movement patterns that an proposed to treat of functional activity, Seventeen patients were videotaped performing three trials of rising. Movement patterns were described with three body components : upper extremities, head-trunk, lower extremities. Subjects rose most commonly using a push and reach pattern of the upper extremities-symmetrical interrupted by rotation pattern in the head-trunk-an asymmetrical squat pattern in the lower extremities and a push and reach pattern of the upper extremities-symmetrical interrupted by rotation pattern in the head-trunk-an symmetrical squat with balance step pattern in the lower extremities.

• Transactions of Materials Processing
• /
• v.9 no.1
• /
• pp.80-87
• /
• 2000

The static softening behavior of SCM 440 could be characterized by the hot torsion test in the temperature ranges of 90$0^{\circ}C$~110$0^{\circ}C$and strain rate ranges of 0.05/sec~5/sec. Interrupted deformation was performed with 2 pass deformation in the pass strain ranges of 0.25$\varepsilon$p~3$\varepsilon$p and interrupted time ranges of 0.5~100sec. The dependences of process variables, pass strain ($\varepsilon$i), stain rate ($\varepsilon$), temperature (T) and interpass time (ti), on static recrystallization (SRX) and metadynamic recrystallization (MDRX)were individually predicted from the modified Avrami's equations, The dependence of pass strain on MDRX was neglectable. Comparison of the softening kinetics between MDRX and SRX showed that the rate of MDRX was more rapid than that of SRX for the same deformation variables. Controlled multipass deformations were performed using static and metadynamic recrystallization of SCM 440.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.2
• /
• pp.99-106
• /
• 2003

In this paper, an intelligent fault location and diagnosis system is proposed. The proposed system identifies the fault location in two-step procedure. The first step identifies candidates of fault location using an fault distance calculation using an iterative method. The second step is diagnosis the actual fault location in the candidates by comparing the current waveform patterns with the expected operation of the protective devices and considering the interrupted load after the operation protective device. The simulations results in the case study demonstrates a good performance of the proposed fault location and diagnosis system.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.181-186
• /
• 2015

Many in the industrial world that consume high amounts of energy are trying to reduce energy when manufacturing their products. Energy saving during manufacturing is a cost reduction. Reduced cost is necessary for profit improvement. The Piston Under Drive Brake used in the current study is an automotive transmission part. The original machining after hot forging was changed to machining after cold forging of a plate in order to save energy and cost. Two extrusion shapes along the outer diameter caused decreased tool life because of the interrupted cut during turning. Therefore, a thickness reduction of two extrusion areas in the outer diameter was needed. The current study suggests an effective way to reduce the thickness of interrupted cut by using progressive blanking.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.257-263
• /
• 2004

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.108-108
• /
• 1997