• 대한청각학회지
• /
• 제24권4호
• /
• pp.167-173
• /
• 2020

Background and Objectives: Top-down restoration of distorted speech, tapped as phonemic restoration of speech in noise, maybe a useful tool to understand robustness of perception in adverse listening situations. However, the relationship between phonemic restoration and speech perception in noise is not empirically clear. Subjects and Methods: 20 adults (40-55 years) with normal audiometric findings were part of the study. Sentence perception in noise performance was studied with various signal-to-noise ratios (SNRs) to estimate the SNR with 50% score. Performance was also measured for sentences interrupted with silence and for those interrupted by speech noise at -10, -5, 0, and 5 dB SNRs. The performance score in the noise interruption condition was subtracted by quiet interruption condition to determine the phonemic restoration magnitude. Results: Fairly robust improvements in speech intelligibility was found when the sentences were interrupted with speech noise instead of silence. Improvement with increasing noise levels was non-monotonic and reached a maximum at -10 dB SNR. Significant correlation between speech perception in noise performance and phonemic restoration of sentences interrupted with -10 dB SNR speech noise was found. Conclusions: It is possible that perception of speech in noise is associated with top-down processing of speech, tapped as phonemic restoration of interrupted speech. More research with a larger sample size is indicated since the restoration is affected by the type of speech material and noise used, age, working memory, and linguistic proficiency, and has a large individual variability.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.112-118
• /
• 1997

Characteristics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials, and tool geometry in metal cutting. Relation between AE signal and tool wear was investigated experimentally. Experiment is carried out by interrupted cutting for SCM420 workpiece with TiN coating tool on HSS material. AE RMS voltage and count per event were increased according to tool wear. The major results are as follows : 1) AE RMS value is nearly constant as cutting speed changes, but is rapidly increase as feed rate increases. 2) AE RMS value and Count per Event increase as tool wear increases. 3) It is more effective to monitor tool wear by Incremental rate of AE RMS value than by Incremental rate of count per event.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (상)
• /
• pp.487-490
• /
• 2003

기계번역 시스템에서 복합단위 처리는 원문의 분석 부담을 줄이고 조합적으로 대역문의 의미를 생성하지 못하는 원문의 처리를 위해 필수적이다. 본 논문에서는 정규표현(Regular Expression)을 이용하여 영어의 연속(Non-Interrupted) 및 불연속(Interrupted) 복합 단위를 인식하는 복합단위 인식기를 제안한다. 제안된 방법은, 기존에 trie 와 같은 index 의 갱신 과정이 불필요하므로, 다수의 작업자에 의해 복합단위 사전을 동시에 구축하는 경우에, 한 작업자의 결과가 실시간으로 다른 작업자의 작업에 반영되는 장점이 있으며, 복합단위 인식에 있어 정규 표현을 이용함으로써 복합단위 인식기의 성능을 선언적으로 향상시킬 수 있다. 번역 실행시의 고속 탐색을 위해서는 전체 복합단위로부터 FSA(finite State Automata) 를 자동으로 구축하여 빠른 속도로 인식 가능하도록 하였다.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.8-12
• /
• 2012

Recently, a wide range of industrial production area has a competitive advantage through cost reduction. Moreover with the development of industrial technology, base material and cutting tool help the machining technology. But most of the machining enterprises have not hold the R&D facilities and human resources. This mainly disturbs the industrial development and th increase of production efficiency. Especially in the interrupted machining process, it showed different behavior with continuous machining process. So it needs to research and develop the tool life and tool wear mechanism analysis.

• 대한기계학회논문집B
• /
• 제31권11호
• /
• pp.912-917
• /
• 2007

Regionally averaged heat transfer distributions and friction factors in square channels with twisted tape inserts and with twisted tape inserts plus interrupted ribs are experimentally investigated. The effects of surface heating condition on heat transfer enhancement are also investigated. Each wall of the square channel is composed of isolated aluminum plates. The interrupted square ribs are arranged along the axial flow direction on the bottom wall only. Experimental tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The results are compared with those of previous investigations for circular tube with axial interrupted ribs and twisted tape inserts.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.31-37
• /
• 2011

The purpose of this study is to investigate cutting characteristics and wear behavior in SCM440 steel with different cutting tools, CBN(Cubic Boron Nitride) and coated CBN. During the test coated CBN tool especially with TiAlN showed better wear resistance behavior than orginal CBN tools. In the interrupted cutting condition, axial groove affected tool surface with impact force during the turning operation. For advantageous turning parameter in the interrupted process it is recommendable that lower speed. Also surface roughness showed better behavior in the coated CBN tool conditions than normal CBN conditions. Mainly this is caused by reduced friction between material and tool surface with coated layer.

• Journal of Chest Surgery
• /
• 제52권1호
• /
• pp.32-35
• /
• 2019

Surgical management of interrupted aortic arch (IAA) with systemic outflow tract obstruction is clearly a challenge. If both ventricles are adequate, the Yasui operation is a useful option. Otherwise, a staged approach through initial hybrid palliation and delayed biventricular repair, tailored to the degree of obstructed outflow, serves to avoid a high-risk neonatal procedure. Herein, we present a patient with IAA and severe systemic outflow tract obstruction whose treatment involved hybrid palliation, followed by a Yasui operation.

• 대한토목학회논문집
• /
• 제37권5호
• /
• pp.837-844
• /
• 2017

일반적으로 도로의 혼잡상태나 운영상태를 평가하기 위한 효과척도로서 연속류에서는 V/C비를 이용하고, 단속류에서는 평균통행속도를 이용한다. 연속류 및 단속류의 운영상태를 평가하기 위한 효과척도에는 도로조건과 교통조건이 주요한 변수로 적용된다. 그런데 도로 및 교통조건외에 강우시와 같은 기상여건이 도로의 운영상태에 영향을 준다. 연속류에서는 강우시 기상상태를 반영한 보정계수에 대한 연구가 선행되어 있으나, 단속류에서는 관련 연구가 미비하다. 본 연구에서는 단속교통류에서 평균통행속도를 산정할 때 반영할 수 있는 강우시 통행속도 감소에 대한 보정계수를 산정하였다. 도로 및 교통조건이 동일하고 강우시 및 비강우시 등 기상조건이 다를 때 강우시 통행속도를 종속변수로 하는 회귀분석을 시행함으로써 강우시 통행속도 보정계수를 산정하였다. 회귀분석을 통하여 산정된 강우시 보정계수는 첨두시간대, 비첨두시간대, 전시간대로 구분하여 산정하였다. 본 연구를 통한 강우시 통행속도 보정계수를 이용하여 기존에 이용되고 있는 도시내 도로의 운영상태를 평가하기 위한 평균통행속도 산정식을 보완할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.67-72
• /
• 1994

Tool test was conducted to investigate the were process of only flank face TiN coated HSS tool in interrupted cutting for variuos cutting speeds and feed rates. Flank wear was caused by microchipping at the cutting edge. At high cutting speed, the which was formed as a result of diffusion and abrasion lowered cutting edge and influenced flank were. Flank wear due to chipping was little influenced by cutting speed.

• 한국콘텐츠학회논문지
• /
• 제17권1호
• /
• pp.166-182
• /
• 2017

본 연구는 경력단절여성들이 재취업 과정에서 경험하는 어려움을 피고용인과 고용인의 차원에서 다면적으로 탐색해 보고자 하였다. 연구참여자는 재취업 경험이 있는 여성집단과 경력단절여성의 채용 경험이 있는 채용담당자 집단으로 구성되었다. 각 집단은 연구참여에 동의한 경력단절여성 6명과 채용담당자 6명으로 구성되었으며, 포커스집단인터뷰를 통해 자료를 수집하고 분석하였다. 연구결과 경력단절여성은 '존재감 상실과 우울', '나이로 인한 채용단절을 느낌', '욕구와 동떨어진 일자리와 조우', '효용성 낮은 자격증', '직장에 소홀할 것 같은 여성', '가사와 육아는 여성들의 몫', '현실적이지 못한 육아지원제도', '경력개발 및 정보 획득을 위한 자원부족'을 경험하였다. 채용담당자들은 '초기고용비용에 대한 소실', '직업의식이 부족한 여성', '여성에게 맞는 일자리 부족', '현실과 다른 여성의 눈높이', '고용연계시스템 개선에 대한 바램'을 경험했다. 이러한 결과를 바탕으로 경력단절여성재취업 활성화를 위한 몇가지 제언을 하였다.