• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.169-179
• /
• 1995

Static restoration mechanism during hot interrupted deformation of Cu-Zn alloy was studied in the temperature range from $550^{\circ}C$ to $750^{\circ}C$ and at a constant strain rate of 0.1/sec. At a given temperature, the hot interrupted deformations were performed with variation of interrupted time $t_i$ form 1 to 50 sec and of interrupted strain ${\varepsilon}_i$ from 0.15 to 0.90. From the analysis of the values of the critical strain of ${\varepsilon}_c$ for tje initiation of dynamic recrystallization and the peak strain of${\varepsilon}_p$, the relationship ${\varepsilon}_c{\fallingdotseq}0.7{\varepsilon}_p$ was obtained. It was clarified that the softening of the interrupted deformation was mainly the static recrystallization and the fractional softening(FS) which was over 30% mostly confirmed this result. The fractional softening of the interrupted time $t_i$ especially and pre-strain. The FS increased with increasing strain rate, interrupted time and pre-strain. The change of microstructures after hot deformation could be predicted by the FS. when the FS was 30~100%, static recrystallization was happened and grain growth was observed at the condition which was $750^{\circ}C$ deformation temperature, 0.45 prestrain and this condition's FS value was over 100%.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.38-42
• /
• 2006

Pressure drops and friction factors in square channels with twisted tape inserts plus axial interrupted ribs are investigated. Tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The rib height-to-channel hydraulic diameter, $e/D_h$, is kept at 0.057 and test section length-to-hydraulic diameter, $L/D_h$ is 30. The pressure drops and friction factor values are enhanced with axial interrupted ribs and twisted tape inserts. Square channels with twisted tape inserts plus axial interrupted ribs show the greatest pressure loss penalty in the present work. Friction factor data obtained for the square channel with twisted tape inserts plus axial interrupted ribs are less than those in the past publications for circular tubes with axial interrupted ribs and twisted tape inserts.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.65-71
• /
• 2009

Purpose: Transcranial direct current stimulation (tDCS) is a useful method for modulating the brain activity. This study compared the effect of continuous and interrupted tDCS using the change in the movement related cortical potential. Methods: Thirty healthy participants (male: 18 and female: 12) were assigned randomly to three groups; sham tDCS, continuous tDCS, which the current continuously flowed for 10 minutes, and interrupted tDCS, which the interrupted current flowed for 10 minutes (repetition: 4sec stimulation and 5sec rest) at an intensity of 1mA with anodal polarity. The effect of tDCS on the right primary motor area was measured from the movement related cortical potential (MRCP) before and after the experiment. MRCP consisted of the bereitshaftspotential (BP) and negative slope potential (NS) at Cz and C4. Results: Continuous and interrupted tDCS showed a significant difference in the changes in the BP, NS at Cz and C4 compared to the sham tDCS. However, there was no significant difference between the continuous tDCS and interrupted tDCS. Conclusion: The change in cortical activity by continuous and interrupted tDCS results from an improvement in the MRCP. An interrupted tDCS may be a safe and useful modality for stimulating the cortical region.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.136-142
• /
• 1996

Automatic monitoring of cutting process is one of the most important technology in machining. AE sensing technology has been applied to monitoring process and proved to be effective in detecting tool abnor- malities such as tool wear and fracture. In this experimental study. AE signals were detected from the tool holder for continuous and interrupted cutting, which obtained from changing workpice material configuration, under control of constant cutting speed from CNC lathe. From statistical and frequency analysis, the AE signals were analyzed to obtaining the characteristics of continuous and interrupted cutting conditions and tool failure. The Kurtosis values decreased but RMS voltages increased as the cutting speed increased, in both continuous and interrupted cutting. RMS voltage is suddenly increased but Kurtosis value is suddenly decreased when tool failure condition. Power spectrum density of AE signals when tool failure reaches extreme value around 0.065 cycles/ .mu. m.

• Journal of Family Resource Management and Policy Review
• /
• v.19 no.2
• /
• pp.75-99
• /
• 2015

The purpose of this study was to examine the career-interrupted lives of highly educated career-interrupted women. The participants were 11 women in their thirties who had graduated from university graduated and had a child. We collected the qualitative data using a focused group interview. The results of this study can be summarized as follows. First, in personal histories of the career-interrupted women, there were marriages and births, difficulties with child care, priority placed on the family, pressure to retire, and an absence of a layoff system related to births and child care. Second, with regard to their interrupted lives, while there was comfort and an absence of work-stress, there was child care stress, financial stress, anxiety due to career uncertainty, a loss of the social self, depression, emptiness, low self-esteem, dependence on husbands, regret, conflict in career choices, and envy of childcare support. Third, their reasons for seeking reemployment included the financial benefits, increased independence, self-realization in their job, hope for a stable job, self-management, and hope for a social network.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1999

While the conventional end-to-end anastomotic technique is accepted as 'the golden standard' for microvascular anastomosis, it is time-consuming and tedious. In an effort to offer faster and safer ways of performing microvascular anastomoses, numerous anastomotic techniques have been proposed, but further refinements in microvascular techniques are still necessary. A 'continuous suture with interrupted knot' technique was devised for faster and safer anastomosis. It has been successfully used in microanastomoses of both artery and vein for free tissue transfer. It is a combination of the interrupted suturing technique and the continuous suturing technique. First, a continuous suture is made with the size of loop decreasing in order, and then the sutures are tied individually from the first loop to the last one as in the conventional interrupted suturing technique. It was applied clinically to fourteen patients over the past ten months and found to be a highly efficient technique that satisfied our needs. This 'continuous suture with interrupted knot' technique has several advantages over other techniques : The operative time is reduced comparing conventional interrupted suture technique. By delaying the tie and with the vessel walls kept separated, the risk of through-stitch can be reduced. Tying all the sutures at one time not only speed up the procedures, but also reduced the surgeon's fatigue. In addition, it has no problem of anastomotic stenosis which is a disadvantage of continuous suture technique. This technique proved to be faster and safer, and has patency equal to that of the conventional end-to-end anastomosis. It is of great help to the surgeon in reducing operative time, especially in clinical situations when many anastomoses are required, or lengthy grafting procedures are undertaken.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.310-323
• /
• 2017

The purpose of this study is to provide necessary data and information in order to support economic activity of career interrupted woman by analysis the differences between seeking work need on individual characteristic and re-employment need of job-seeking activities. This study includes the result of reviewing a prospective study and an enpinical analysis based on the theoretical background of career interrupted woman, vocational education, individual characteristic and re-employment need to achieve its goal. The collected data from 150 career interrupted women who had a vocational education was analyzed by one-way analysis of variance, T-verification and SPSS 12.0v program. In summary of this study, re-employment need would be different by individual characteristic, seeking work need and job-seeking activities. It shows that the method of re-employment should be provided as considering the individual characteristic of career interrupted woman. Therefore, this study suggests the necessity of suited education and improved system for individual characteristic of career interrupted woman.

• Journal of vocational education research
• /
• v.36 no.2
• /
• pp.51-67
• /
• 2017

The present study aimed to investigate the mediating effect of outcome expectation on the relationship between the career decision-making self-efficacy and the career planning of career interrupted women. Survey data were collected from 270 career interrupted women. To examine the mediating effect, the hierarchical regression analysis had been done according to the procedure suggested by Baron and Kenny(1986). The results of data analysis were summarized as follow: First, the career decision-making self-efficacy, the outcome expectation, and the career planning scores from the career interrupted women showed positive correlations. Second, the result of the hierarchical regression analysis showed that the outcome expectation partially mediated the relationship between the career decision-making self-efficacy and the career planning of career interrupted women. The current results imply that the level of outcome expectation is important for the career counseling for career interrupted women in practice and future research.

• Archives of Reconstructive Microsurgery
• /
• v.3 no.1
• /
• pp.45-53
• /
• 1994

Suture microvascular anastomosis is time-consuming and tedious and demands long and continuous training. Techinique of anastomosis of microvessel was presented interrupted suture and continuous suture. Recently the unilink instrument system is created as a fast and simple method to achieve high patency rates without long and continuous training in the anastomosis of small vessels. The author experimentally studied the femoral artery of 20 mice(0.5-1.0mm, av. 0.7mm), the femoral vein of 20 mice(0.8-1.6mm, av. 1.2mm) after anastomosis with interrupted suture in 20 cases and continuous sutre in 20 cases. For the unilink apparatus we used the carotid arteries of 15 cases in 14 rabbits(1.0-1.6mm, av. 1.3mm) and facial veins of 12 cases in 14 rabbits(0.9mm-2.2mm, av. 1.5mm). A total of 27 arterial and venous anastomoses were performed. We examined the postoperative patency at immediate, 2 weeks, and 8 weeks. The results were as followings, 1. In the arterial anastomosis the rate of patency was 90%(18/20) in interrupted suture, 90%(18/20) in continuous suture and 93%(13/15) in unilink apparatus. In the venous anastomosis the rate of patency was 90%(18/20) in interrupted suture, 80%(16/20) in continuous suture and 100%(9/9) in unilink apparatus. 2. The mean time for completion of the arterial anastomosis were 12.2 minutes in interrupted suture group, 10.3 minutes in continouous suture group and 8.5 minutes in unillnk apparatus group. The mean time for completion of the venous anastomosis were 13.6 minutes in interrupted suture group, 11.0 minutes in continuous suture group and 6.2 minutes in unilink apparatus group. 3. At the histological examination of suture group, hyperplastic reaction of middle layer and subintimal hyperplasia were observed. In unilink apparatus group, the endothelium layer was continued and the thickness of vessel wall was decreased due to moderate atrophy of the media and mild degree of nonspecific chronic inflammation were seen around the unilink apparatus. 4. No significants was noticied in foreign body reaction among the interrupted, continuous and unilink apparatus group. 5. A case of the arterial anastomosis was released with acting out at 15 minutes after operation. 6. The important factors in the technical problems were accurate apposition of the cut vessel edges in suture group and the proper selection of the ring size and optimal fitting between two rings in unilink apparatus group. Even though the outer diamater of vessel in suture group was different from that in unilink apparatus group the unilink method provides a very safe, fast, and simple way to perform microvascular anastomoses especially in anastomosis of vein. But howerver suture was needed in vessels below 1 mm outer diamater. In that situation continuous suture was benefit than the interrupted suture in operation time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.77-82
• /
• 2014

In this study, we carried out the interrupted cutting of carbon steel for a machine structure (SM45C) with a CVD-coated tool and conducted an ANOVA test and a confidence interval analysis to find factors influence the surface roughness and to obtain a regression equation. We found that factor which mostly affects the surface roughness during interrupted cutting was the feed rate. The cutting speed and depth of the cut only had small effect on the surface roughness. From the result of a multi-regression analysis during an interrupted cutting experiment, we obtained regression equation. Its coefficient of determination was 0.918, indicating that the regression equation was predictable. Compared to continuous cutting, if the feed rate increases, the surface roughness will also increase during interrupted cutting.