• Korean Journal of Audiology
• /
• v.24 no.4
• /
• pp.167-173
• /
• 2020

Background and Objectives: Top-down restoration of distorted speech, tapped as phonemic restoration of speech in noise, maybe a useful tool to understand robustness of perception in adverse listening situations. However, the relationship between phonemic restoration and speech perception in noise is not empirically clear. Subjects and Methods: 20 adults (40-55 years) with normal audiometric findings were part of the study. Sentence perception in noise performance was studied with various signal-to-noise ratios (SNRs) to estimate the SNR with 50% score. Performance was also measured for sentences interrupted with silence and for those interrupted by speech noise at -10, -5, 0, and 5 dB SNRs. The performance score in the noise interruption condition was subtracted by quiet interruption condition to determine the phonemic restoration magnitude. Results: Fairly robust improvements in speech intelligibility was found when the sentences were interrupted with speech noise instead of silence. Improvement with increasing noise levels was non-monotonic and reached a maximum at -10 dB SNR. Significant correlation between speech perception in noise performance and phonemic restoration of sentences interrupted with -10 dB SNR speech noise was found. Conclusions: It is possible that perception of speech in noise is associated with top-down processing of speech, tapped as phonemic restoration of interrupted speech. More research with a larger sample size is indicated since the restoration is affected by the type of speech material and noise used, age, working memory, and linguistic proficiency, and has a large individual variability.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.112-118
• /
• 1997

Characteristics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials, and tool geometry in metal cutting. Relation between AE signal and tool wear was investigated experimentally. Experiment is carried out by interrupted cutting for SCM420 workpiece with TiN coating tool on HSS material. AE RMS voltage and count per event were increased according to tool wear. The major results are as follows : 1) AE RMS value is nearly constant as cutting speed changes, but is rapidly increase as feed rate increases. 2) AE RMS value and Count per Event increase as tool wear increases. 3) It is more effective to monitor tool wear by Incremental rate of AE RMS value than by Incremental rate of count per event.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.487-490
• /
• 2003

기계번역 시스템에서 복합단위 처리는 원문의 분석 부담을 줄이고 조합적으로 대역문의 의미를 생성하지 못하는 원문의 처리를 위해 필수적이다. 본 논문에서는 정규표현(Regular Expression)을 이용하여 영어의 연속(Non-Interrupted) 및 불연속(Interrupted) 복합 단위를 인식하는 복합단위 인식기를 제안한다. 제안된 방법은, 기존에 trie 와 같은 index 의 갱신 과정이 불필요하므로, 다수의 작업자에 의해 복합단위 사전을 동시에 구축하는 경우에, 한 작업자의 결과가 실시간으로 다른 작업자의 작업에 반영되는 장점이 있으며, 복합단위 인식에 있어 정규 표현을 이용함으로써 복합단위 인식기의 성능을 선언적으로 향상시킬 수 있다. 번역 실행시의 고속 탐색을 위해서는 전체 복합단위로부터 FSA(finite State Automata) 를 자동으로 구축하여 빠른 속도로 인식 가능하도록 하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.8-12
• /
• 2012

Recently, a wide range of industrial production area has a competitive advantage through cost reduction. Moreover with the development of industrial technology, base material and cutting tool help the machining technology. But most of the machining enterprises have not hold the R&D facilities and human resources. This mainly disturbs the industrial development and th increase of production efficiency. Especially in the interrupted machining process, it showed different behavior with continuous machining process. So it needs to research and develop the tool life and tool wear mechanism analysis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.11
• /
• pp.912-917
• /
• 2007

Regionally averaged heat transfer distributions and friction factors in square channels with twisted tape inserts and with twisted tape inserts plus interrupted ribs are experimentally investigated. The effects of surface heating condition on heat transfer enhancement are also investigated. Each wall of the square channel is composed of isolated aluminum plates. The interrupted square ribs are arranged along the axial flow direction on the bottom wall only. Experimental tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The results are compared with those of previous investigations for circular tube with axial interrupted ribs and twisted tape inserts.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.31-37
• /
• 2011

The purpose of this study is to investigate cutting characteristics and wear behavior in SCM440 steel with different cutting tools, CBN(Cubic Boron Nitride) and coated CBN. During the test coated CBN tool especially with TiAlN showed better wear resistance behavior than orginal CBN tools. In the interrupted cutting condition, axial groove affected tool surface with impact force during the turning operation. For advantageous turning parameter in the interrupted process it is recommendable that lower speed. Also surface roughness showed better behavior in the coated CBN tool conditions than normal CBN conditions. Mainly this is caused by reduced friction between material and tool surface with coated layer.

• Journal of Chest Surgery
• /
• v.52 no.1
• /
• pp.32-35
• /
• 2019

Surgical management of interrupted aortic arch (IAA) with systemic outflow tract obstruction is clearly a challenge. If both ventricles are adequate, the Yasui operation is a useful option. Otherwise, a staged approach through initial hybrid palliation and delayed biventricular repair, tailored to the degree of obstructed outflow, serves to avoid a high-risk neonatal procedure. Herein, we present a patient with IAA and severe systemic outflow tract obstruction whose treatment involved hybrid palliation, followed by a Yasui operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.837-844
• /
• 2017

Generally, V/C ratio in uninterrupted traffic flow and average travel speed in interrupted traffic flow are utilized as measure of effect for assessing operational situation of roads. The set of road conditions and traffic conditions are considered to be major variables for assessing operational situation in the traffic flow. However, weather conditions such as rainfall also affect the operational situation of roads. The studies reflected by the rainy situation are conducted in the uninterrupted flow, but the related studies are insufficient in the interrupted flow. In this study, the modification factors during rainfall in the interrupted flow were suggested, and the factors could be used when calculating the average travel speed during rainfall in the interrupted flow. By utilizing the data that were investigated in the same road and traffic conditions and the different weather conditions (rainy day or clear day), the modification factors were founded on regression analysis of the travel speed during rainfall as a dependent variable. Modification factors was suggested in dividing peak time, non-peak time, and whole period. Based on this study, the modification factors can be used to complementing the average travel speed model for assessing the operational situation of urban streets during rainfall.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.67-72
• /
• 1994

Tool test was conducted to investigate the were process of only flank face TiN coated HSS tool in interrupted cutting for variuos cutting speeds and feed rates. Flank wear was caused by microchipping at the cutting edge. At high cutting speed, the which was formed as a result of diffusion and abrasion lowered cutting edge and influenced flank were. Flank wear due to chipping was little influenced by cutting speed.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.166-182
• /
• 2017

The purpose of this study was to explore the difficulties experienced by career-interrupted women and recruiters in the reemployment process. Using focused group interview(FGI), the depth interviews with six women and six recruiters had been carried out. Collected data was analyzed based on the interview and focus group research method by Corbin and Strauss(2008). Finally, eight domains in career-interrupted women' experience and five in recruiters' were created from the analysis of the data. In the context of the experience there were something in common. They include the need of proper job for woman, the lack of employment system and resource, and the negative perception of women workers. As result, we suggested implications. for solving the difficulties in the reemployment process.