• Journal of Chest Surgery
• /
• v.10 no.1
• /
• pp.38-43
• /
• 1977

With the adevance of widespread mechanization and high-speed era, the incidence of traumatic rupture of the tracheobronchial tree has been increased considerably. We have experienced these diseased of the 3 cases in our department. The first case was a 25 year old male who was severe dyspneic and subcutaneous emphysema, hemoptysis, and hemopneumothorax of both side were noted. During tracheostomy, it was found that the 2net ring of the trachea was ruptured. No definitive procedure was made on admission. Corrective surgery was performed with end-to-end anastomosis on 31 post-traumatic day. The second case was a 43 year old female who received multiple stab wounds on the anterior neck and it was found that the cricoid cartilage was transected partially. The injured cartilage was approximated with interrupted suture of No. 600 wire. The third case was a 19 year old male who had sustained a compression chest injury without external wound or rib fracture. At five days after trauma, he had suffered from dyspnea, and obstruction of the left main bronchus due to traumatic bronchial rupture was confirmed by means of bronchoscopy and bronchography at two weeks after the trauma. End-to-end anastomosis of the bronchus was performed and the left lung was aerated well. Mild postoperative stenosis of trachea was remained in the first case. Others were uneventful.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.133-139
• /
• 2007

Nickel powder was coated with aluminum nitrate solution to increase the thermal stability of a porous nickel support and control the nickel content in the Pd-Cu-Ni ternary alloyed membrane. Raw nickel powder and alumina coated nickel powder were uniaxialy pressed by home made press with metal cylindrical mold. Though the used nickel powder prepared by pulsed wire evaporation (PWE) method has a good thermal stability, the porous nickel support was too much sintered and the pores of porous nickel support was plugged at high temperature (over $800^{\circ}C$) making it not suitable for the porous support of a palladium based composite membrane. In order to overcome this problem, the nickel powder was coated by alumina and alumina modified porous nickel support resists up to $1000^{\circ}C$ without pore destruction. Furthermore, the compositions of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow could be controlled by not only Cu-reflow temperature but also alumina coating amount. SEM analysis and mercury porosimeter analysis evidenced that the alumina coated on the surface of nickel powder interrupted nickel sintering.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.29-32
• /
• 2000

The static and metadynamic recrystallization of non-heat treated medium carbon steel(Fe - 0.45wt.$\%C\;-\;0.6wt.\%Si\;-\;1.2wt.\%Mn\;-\;-0.12wt.\%Cr \;-\;0.1wt.\%V \;-\;0.017wt\%$.Ti) were studied by the torsion test in the strain rate range of 0.05 - 5 $sec^{-1}$, and in the temperature range of $900\;-\;1100\;^{\circ}C$. Interrupted deformation was performed with 2 pass deformation in the pass strain range of $0.25 {\varepsilon}_p(peak strain)\;and\;{\varepsilon}_p$, and in the interpass time range or 0.5 - 100 sec. The dependence or pass strain(${\varepsilon}_i$), strain rate( $\dot{\varepsilon}$ ), temperature(T), and interpass time($t_i$) on static recrystallization (SRX) and metadynamic recrystallization (MDRX) were predicted from the modified Avrami's equations respectively. Comparison of the softening kinetics between SRX and MDRX was indicated that the rate of MDRX was more rapid than that of SRX under the same deformation variables.

• Advances in pediatric surgery
• /
• v.13 no.1
• /
• pp.81-86
• /
• 2007

A 3-year-old boy with purulent otitis media received a chest radiograph as the part of a routine work up. The patient was normal appearing, in no acute distress. The patient's lung and heart sounds were clear and normal. The patient's abdomen was soft, non-distended, and non-tender. An anterior cardiophrenic mass was incidentally identified on the lateral chest radiograph. A computed tomography scan demonstrated a diaphragmatic hernia with bowel loops in the retrosternal space. An exploratory operation revealed a diaphragmatic defect (4 cm in diameter) on the left side of the falciform ligament, through which transverse colon was protruded. There was no hernia sac, and the defect was closed with interrupted No. 2 silk sutures. The child was discharged on the 8th postoperative day without any complications. During 6 months of follow-up period, recurrence was not noticed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.93-97
• /
• 1987

The seeds cf Pinus Koraiensis mere studied for their moisture, total lipids and ash contents and fatty acid composition. The seeds contained ca. 3.6% moisture, 70.4% purified total lipids and 2.5% ash. The proximate composition of the seeds was not influenced by the sampling rears (1984 and 1985). Twenty-one fatty acids ranged from myristic to arachidic acids were identified in the seed lipids. The seed lipids contained linoleic acid (47.9%), oleic acid (28.4%) and 5, 9, 12-18:3(11.1%) as major fatty acids and 5,9,12-18:3, 5,11-20:2 and 5,11,14-20:3 as 5-olefinic nonmethylene-interrupted polyenoic acids. The sampling Tears also had no effect on the fatty acid composition of the seed lipids.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1558-1564
• /
• 2006

This study addressed security requirements for ad-hoc network environments, which lies at the hour of the ubiquitous computing revolution and proposed a partially-distributed certificate management system that can ensure security in mobile ad-hoc networks. The proposed model is characterized by ie ability to handle dynamic mobility of nodes, minimize routing load and enhance expandability of network by allowing participating nodes to authenticate each other without being interrupted by joining the cluster. The security, efficiency and robustness of the proposed model were evaluated through simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.386-393
• /
• 2007

Charge-pump high voltage inverter for Plasma backlight using CIM(Current Injection Method) is proposed in this paper. Adoption of ERC(Energy Recovery Circuit) is a new attempt in high voltage inverter so that it is not only energy recovery but also improvement of discharge stability and system unstability which is interrupted by noise. Using a charge-pump technique enables low voltage switches to be usable, the cost can be reduced. CIM is adopted to achieve high speed energy recovery in proposed circuit. Operations of the proposed circuit are analyzed for each mode. The proposed circuit is verified to be applicable on a 32 inch plasma backlight panel by experimental results.

• Journal of Korean Critical Care Nursing
• /
• v.1 no.1
• /
• pp.19-31
• /
• 2008

Purpose: This study was conducted to exam the effects of the Abbreviated Cognitive Behavioral Therapy(ACBT) on chronic insomnia. Methods: Study was one-group interrupted time series study that involved 13 adults(mean age=51.7, aged 25-77 years) with chronic primary insomnia who visited sleep disorder clinic of S Hospital from November 2004 to October 2005. The subjects received 2-session individual ACBT with 2 week-interval($1^{st}$: 1.5- 2hrs, $2^{nd}$: 20-30min). To measure the subjective insomnia severity and sleep patterns, 3 times of insomnia severity index and sleep logs were completed(before ACBT, after ACBT, and 3-month after ACBT). The main outcomes were subjective insomnia severity and sleep patterns(sleep onset latency, waking after sleep onset, and total sleep time, sleep efficiency). The data were analyzed with SPSS 10.0 version program by Friedman test, Wilcoxon signed rank test with Bonferroni correction. Results: There were statistically significant decrease in insomnia severity index, sleep onset latency, and waking after sleep onset, and increase total sleep time and sleep efficiency. Conclusion: ACBT was effective in reducing subjective insomnia severity and improving sleep patterns. Sleep improvement was better sustained over time with ACBT.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.365-368
• /
• 2002

The design of industrial arc plasma systems is still largely based on trial and error although the situation is rapidly improving because of the available computational power at a cost which is still fast coming down. The desire to predict the behavior of arc plasma system, thus reducing the development cost, has been the motivation of arc research. To interrupt fault current, the most enormous duty of a circuit breaker, is achieved by separating two contacts in a interruption medium, $SF_{6}$ gas or air etc., and arc plasma is inevitably established between the contacts. The arc must be controlled and interrupted at an appropriate current zero. In order to analyze arc behavior in $SF_{6}$ gas circuit breakers, a numerical calculation method combined with flow field and electromagnetic field has been developed. The method has been applied to model arc generated in the Aachen nozzle and compared the results with the experimental results. Next, we have simulated the unsteady flow characteristics to be induced by arcing of AC cycle, and conformed that the method can predict arc behavior in account of thermal transport to $SF_{6}$ gas around the arc, such as increase of arc voltage near current zero and dependency of arc radius on arc current to maintain constant arc current density.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.361-367
• /
• 2017

A membrane type LNG cargo tank is equipped with a pump tower and a liquid dome for loading and unloading of LNG. However, the membrane running continuously on the tank wall to prevent leakage of LNG is interrupted by the liquid dome, hence care should be taken in the design of liquid dome and its substructures. In case of GTT NO96 membrane type cargo containment system, chair structure is arranged along the periphery of the liquid dome targeting to support the membrane which is exposed to the both hull girder and thermal load. This paper proposes a new and simple chair structure, which outperforms traditional design from productivity point of view maintaining same level of structural safety. Strength assessment on the new design was performed to guarantee the structural safety of the new design, which includes strength, fatigue and crack propagation analysis.