• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.49-59
• /
• 1999

In this study, we individualize the clauses to sort out the troubled ones, draw up a interrelation model in order to visually organize the relations, and finally, suggest the desirable application idea. The interrelation model suggested in this study has been made based on the matrix method. On this matrix, we arranged the environmental factors on horizontal and vertical axis, and when we describe the relation of each factors, we set the horizontal axis as the base and divided the content into three grades : Fine, Medium, and Poor. In addition to that, we expressed those three grades into numerical value like 3 points for Level Fine, 2 points for Level Medium, and 1 point for Level Poor and then, we converted this numerical values into index numbers. We could classify the index numbers such as AS, PS, Q-index, P-index. AS is an index numerically shows the degree of giving environmental effect, PS is an index numerically shows the degree of receiving environmental effect, Q-index is an index shows the aggravate degree, and P-index shows the relation degree. The Q/P-index with large numbers has considerable effect on the environmental system, while the small numbered Q/P-index barely effect on the environmental system. Moreover, we classified the environmental factors into 5 levels(I~V) according to the relations between the Q-index and P-index. Level I is less affected by the environment and has more giving effect, while Level V is more sensitively affected by the environment and has more receiving effect, which we considered important. Therefore, we could come up with the result that if we consider the each level of factors when we evaluate the EIA, the result would be far more accurate and reliable since it contains mutual relation aspect of EIA. The suggested interrelation model in this thesis is presentable as one of those scoping system. We highly believe the need of scoping system in EIA and suggest the interrelation model as the alternative idea for scoping system.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.523-530
• /
• 2008

In structural design provision, maximum punching shear stress of slabs is prescribed as combined stress in direct shear occurred by gravity load and eccentric shear occurred by unbalanced moment. This means that the effect of unbalanced moment is considered to decide the punching shear stress. However, from the resistance capacity standpoint, the effect of unbalanced moment strength is not considered for deciding punching shear strength. In this paper, a model considering interrelation between unbalanced moment and punching shear was proposed. In the model, the relation between load effect and resistance capacity in unbalanced moment and punching shear was two-dimensionally expressed. Using the interrelation model, a method how unbalanced moment strength should be considered to decide the punching shear strength was proposed. Additionally, effective width enlargement factors for deciding the unbalanced moment strength of flat plates with shear reinforcements were proposed. The interrelation model proposed in this paper is very effective for the prediction of the behavior of slab-column connection because not only punching shear and unbalanced moment strengths but also failure modes of flat plates can be accurately predicted.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.113-123
• /
• 2007

Through so that accident of semiconductor industry deduces unsafe factor of the person center on unsafe behaviour that incident history and questionnaire and I made starting point that extract very important factor. It served as a momentum that make up base that analyzes factors that happen based on factor that extract factor cause classification for the first factor, the second factor and the third factor and presents model of human error. Factor for whole defines factor component for human factor and to cause analysis 1 stage in human factor and step that wish to do access of problem and it do analysis cause of data of 1 step. Also, see significant difference that analyzes interrelation between leading persons about human mistake in semiconductor industry and connect interrelation of mistake by this. Continuously, dictionary road map to human error theoretical background to basis traditional accidental cause model and modern accident cause model and leading persons. I wish to present model and new model in semiconductor industry by backbone that leading persons of existing scholars who present model of existent human error deduce relation. Finally, I wish to deduce backbone of model of pre-suppression about accident leading person of the person center.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.149-152
• /
• 2008

In structural design provision, maximum punching shear stress of slabs is prescribed as combined stress of direct shear occurred by balanced gravity load and eccentric shear occurred by unbalanced moment. This means that the effect of unbalanced moment is considered to decide the punching shear stress. However, from the resistance capacity standpoint, the effect of unbalanced moment strength is not considered for deciding punching shear strength. For this problem, a model to show unbalanced moment-punching shear interrelation was proposed. In the model, the relation between load effect and resistance capacity in unbalanced moment-punching shear was two-dimensionally expressed. Using the interrelation model, a method how unbalanced moment strength should be considered to decide the punching shear strength was proposed. Additionally, a effective width enlargement factor for deciding the unbalanced moment strength of flat plates with shear reinforcements was proposed. The interrelation model proposed in this paper is very effective for the design because not only punching shear and unbalanced moment strengths but also failure modes of flat plates can be accurately predicted.

• Land and Housing Review
• /
• v.9 no.4
• /
• pp.25-32
• /
• 2018

Application of geothermal energy in buildings has been gaining popularity as it provides the benefits of both heating and cooling a building. Among the various types of geothermal energy systems, ground-coupled heat pump system is the most commonly applied one in South Korea. A ground heat exchanger plays an important role as a heat source in winter and a heat sink in summer. For the stable operation of a ground-coupled heat pump system, a ground heat exchanger should be sized so that it provides sufficient heating and cooling energy. Heating and cooling energies generated in ground heat exchangers mainly depend on the temperature difference between the heating medium in ground heat exchangers and the surrounding ground. In addition, the performance of ground heat exchangers influences the change in ground temperature. Therefore, it is necessary to consider this interrelation between the change in the ground temperature and the performance of ground heat exchanger for an accurate estimation of its performance. However, previous thermal analysis models for ground heat exchangers are not competent enough to allow a complete understanding of this interrelation. Therefore, this study proposes a three-dimensional equivalent, transient ground heat exchanger analysis model. First, a previous thermal analysis model for ground heat exchangers, including an analytical model, a g-function, and a numerical model are analyzed. Next, to overcome the limitations of the previous models, a three-dimensional equivalent, transient ground heat exchanger model is proposed. Finally, this study validated the proposed model with the measurement data of the thermal response test, sandbox test, and TRNSYS DST model. All validation results showed a good agreement. These findings helped us to investigate the thermal performance of ground heat exchangers more accurately than the analytical models, and faster than the numerical models. Furthermore, the proposed model contributes to the design of ground heat exchangers by considering the different operation conditions of buildings.

• Magazine of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.19-24
• /
• 2008

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.57-65
• /
• 2005

This research is about the methods in making computers understand the situation in regards to interaction between House and Human Behavior. In this paper, house is the ubiquitous house, as a future house, adopting ubiquitous computing presenting the interrelation of human and house - interior space, architecture, nature. And the Context Aware Model of ubiquitous house is proposed to embody the ubiquitous house. The research objective is to systematize the context in the ubiquitous house and suggest a theoretical basis to embody the ubiquitous house interacting between the House ud Human Behavior Especially, this paper focuses on the Context Aware Model based on FengShui-Theory(sp. YangTaek-Theory). The ubiquitous house is not what operates passively by human but a information-oriented house that can predict the situation and the living patterns of human. For a information-oriented house and informal living context at home, this paper uses FengShui-Theory whose central concern is the interrelation of human and nature. Through these concepts, this research will suggest how to systematize, control and manage the context at home. In the end, it is expected to offer a theoretical basis to embody the intelligent house and apply an environment design communicating between the computers and human.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.823-832
• /
• 2011

Recently, as the project becomes larger and the number of project increases by the information system integration in the public and financial sectors, it is necessary to have a proper plan to manage the information system project. There have been many researches about the project management, success elements and failure elements, but the research on the interrelation between project management areas leaves much to be desired. This research deduces the scope, schedule, quality, work force and risk as the project management areas from the preceding research and the questionnaire and interview with PM developers, information system builders and data processing experts. And, it analyzes the interrelation and the relative importance between management areas, classifies the progress of the management areas under plan, implementation and completion stage and presents the frame to evaluate the accomplishment of each progress.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.114-122
• /
• 2014

For an efficient finite-difference time-domain(FDTD) analysis of coaxial-probe feeding structures in radio frequency(RF) and microwave bands, an interrelation between equivalent source modeling techniques is investigated. In existing literature, equivalent source models with delta-gap or magnetic-frill concepts have been developed by many researchers. It is well known that FDTD implementation and computational accuracy of these source models are slightly different. In this paper, the interrelation between FDTD equivalent source models for coaxial feeding structures under the quasi-static approximation(QSA) is presented. As a function of FDTD equivalent source models, time-domain and frequency-domain responses of a coaxial-probe fed conical monopole antenna are calculated numerically. And comparison results of computational accuracy and efficiency are provided.

• Culinary science and hospitality research
• /
• v.4
• /
• pp.167-187
• /
• 1998

The human resources play an important role in a hotel cooking department. The object of this study is to gain basic data for searching an effective human resources management method of cooking department in the hotel. To achieve this object, I proceeded like this. In the second chapter, I exerted myself to arrange the theoretical system on the content of the human resources management through an internal and external philological research. In the third chapter, I established conceptional research model to study factual research and three hypotheses. And I made all high-grade hotel cooking employee in Taegu and Kyung-Buk answer an questionnaire, so practiced interrelation analysis and dispersion analysis according to research hypothesis. The results are as follows. First, the result of hypothesis 1 was that three was rather a high interrelation between the human resources management factor of cooking department and its overall evaluation. Second, the result of hypothesis 2 was that three was a significant difference about the overall evaluation of cooking business management according to the position demographically. Third, the result of hypothesis 3 was that there was a significant difference according to the scholastic ability, position and the district of hotel in the demographical evaluation of human resources management factor. The limits of this study were that first, I defined the subject as the cook employee of high-grade hotel in Taegu and Kyung-Buk, second, I utilized partial variance among many variances affecting human resources management. Therefore after this study, these limits much be overcomed and multiple and scientific study must be accomplish. So human resources of cooking department in the hotel must improve more.