• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.528-535
• /
• 2011

According to railway safety regulations for securing the railway vehicle's quality and performance, it can be partly exempted that the performance tests and production inspections on the railway vehicles which are produced and assembled for the purpose of test and research. The reasons of this exemption are for ensuring maximum autonomy and for saving time considered the development period of railway vehicle. However, it was continuously demanded the necessity of supplementation on the confirmation about railway vehicle's quality & performance. Therefore, we added "The monitoring step" which is for securing the quality and performance in high speed railway vehicle's subsystem & compartment to supplement those tests & inspections in development. In this paper, based on a standard ABS(Activity Breakdown Structure) of railway vehicle and a WBS(Work Breakdown Structure) of the railway vehicle system, we investigate the necessity of monitoring in the High speed railway vehicle development. And by comparing and analyzing the essential requirements of international standard, IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability), we try to examine a standard monitoring procedure.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.225-227
• /
• 2009

International standard specification, H.264/SVC improved from H.264/AVC, is set up so as to promote free use of huge multimedia data in various channel environments.;H.264/AVC is a international standard speicification for video compression, adopted and commercialized as standard for DMB broadcasting by JVT of ISO/IEC MPEG and ITU-T VCEG. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding. Among prediction technologies, 'inter-layer intra prediction' is to use co-located block of up sampled sublevels as a prediction signal. At this time, application of interpolation is one of the most important factors to determine encoding efficiency. SVC's currently using poly-phase FIR filter of 4-tap and 2-tap respectively to luma components. This paper is written for the purpose of analyzing encoding performance according to the interpolation. For this purpose, we applied poly-phase FIR filter of '2-tap', '4-tap' and '6-tap' respectively to luma components and then measured bit-rate, PNSR and running time of interpolation filter. We're expecting that the analysis results of this paper will be utilized for effective application of interpolation filter. SVC standard uses 'intra/inter prediction' in AVC as well as 'inter-layer intra prediction', 'inter-layer motion prediction' and 'inter-layer residual prediction' to improve efficiency of encoding.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.193-202
• /
• 2015

The development of the security solutions that can provide a variety of security services is needed urgently. For development of the security solutions, analysis of international standard security technology is the key. In this paper, international organizations' standardization(ISO/IEC JTC1 SC27, ITU-T SG-17, IETF Security Area, etc.) and the current trend of the standard security technology are mainly analyzed. The core of the latest security technology(Application Bridging, DNS-based Authentication, HTTP Authentication, IP Security, Javascript Security, Authentication Technology Next Generation, Managed Incident, Web Authorization Protocol, Security Automation, Transport Layer Security, etc.) is analyzed focusing on 18 working groups of the IETF.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.437-443
• /
• 2014

Electric motors and drives consume the largest amount of electricity more than 40% of global electricity consumption. In addition, motors, drives and its components are included in the global high-trade products and the main driving source for industrial equipment and house appliances. Thus, International standards and regulations for their safety and efficiency are internationally being discussed and created for the protection of its citizens and energy saving. So, understanding the international standards and the regulation of each country is essential to enhance overseas market and to develop product. In this paper, on the basis of this background, status and trends of international standards and regulations are introduced for safety and efficiency of motors and the drives. Safety and efficiency of the IEC (International Electrotechical Commission) standards are introduced in the emphasis. Also, regulations are studied about the differences and trends in each county.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.153-158
• /
• 2021

Convergence is the process of gradual adoption of a certain accounting standard issued by different regulatory bodies. The aim is to achieve uniformity and standardization across borders to open opportunities for international investment and collaboration. The implementation of IFRS, in theory, encourages more transactions by presenting financial statements in a simple and understandable manner for all investors and other businesses interested in the company. Using event study methodology, this study investigates whether Malaysian companies' adoption of IFRS is recognized by the investment community. A total of 89 public listed companies in Bursa Malaysia are involved in this study. The results show that about 62.8 percent of the companies that adopted IFRS-based financial statements experienced an increase in their average abnormal return after the announcement. However, the paired sample test results show that only 5.6 percent out of 89 companies studied experience a significant difference in abnormal return before and after the announcement. The inexistence of the average abnormal return difference between before and after the announcement may indicate that IFRS-based financial statements do not have any new market informational content. This study found little evidence to show that convergence with IFRS affects the company's stock price in Malaysia.

• Journal of Korea Port Economic Association
• /
• v.22 no.1
• /
• pp.1-15
• /
• 2006

This paper analyzes how levels of logistics standardization are related to logistics costs. The study surveyed ratios of standard pallet use in order to measure levels of firms' standardization in logistics management. Research focused on how firms' logistics costs were related to their levels of logistics standardization and ratios of standard pallet use. After measuring use of standard pallets and logistics costs, optimal levels of logistics standardization were estimated based on survey data. Logistics costs and standardization were more related to labor than to freight volume or export. Results indicated that firms could reduce logistics costs by raising levels of logistics standardization; optimal levels of standard pallet use out of Korean firms' total manufacturing cargo volume were estimated at 44.26% for multi-standard pallets and 57.99% for a single standard pallet (a unit load system). The study demonstrated that adopting a single standard pallet results in better cost saving logistics systems than use of multi-standard pallet types. These results may explain why firms pursue standardization in logistics systems.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.25
• /
• pp.3-40
• /
• 2005

Many Korean construction companies have been performing a variety of overseas construction projects since the 1970s. It is unfortunate that in many cases they have had to suffer big losses caused by errors and defects in the design and construction of the projects. In the author's opinion, however, there were losses that could have been avoided if they had understood better the feature and content of the particular construction contract. Few lawyers and scholars in Korea have been interested in the research and study of international construction contracts. This is mainly because they do not have access to practical sources outside of Korea for them to research and study since the contracts undertaken have been dealt with by law firms in other jurisdictions to which the disputes apply. This article is aiming primarily at the introduction of the issues which the practitioners are likely to confront in the process of reviewing and performing the international construction contract. In some cases solutions are sought about these issues based upon the FIDIC standard terms and conditions, the actual experience of practice, and UNIDROIT Principles, etc. It is reasonable to say that all the issues related to the international construction contract cannot be covered in a short article like this. The author wishes this article could induce subsequent studies on international construction contracts for further research. It has to be noted that from time to time Korean construction practices have been compared to the international ones for better understanding. This article mostly includes cases where the Korean construction companies go overseas for their projects, while there are some cases where foreign developers and financial investors participated in domestic projects in which international construction contracts forms were adopted. A few precedent domestic writings about international construction contracts seems to lack emphasis on the points that there are several standard construction contract forms and that they are different. The differences are mainly in accordance with who bears the design responsibility, how the owner has to make progress payments to the contractor and who the funding source for the project is. This article tries to make it clear that there are significant differences between the standard contract forms, e.g. a simple construction form, a design-build form and an EPC/turnkey form of contract. Again, the author hopes that this article can arouse the interest in the international construction contracts from both academic and practical fields, so that many subsequent advanced articles can help our construction industry become much more competitive in the world through awareness of the methods of procurement and administration of the contracts.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.65-73
• /
• 2017

The objective of this study is to suggest the templates for the terminology standardization cases of safety standard on integrated management system, so that integrated management of safety standards is introduced to replace redundant, or conflicting functions and performance of these standards. And to carry out the terminology standardization enables management efficiently. Therefore this study suggests and analyzes cases of terminology standardization of domestic and international research trends. In addition to proposes a architectural schema for disaster safety standard and writing disaster safety standardizations of the International Organization for Standardization. For the objectives, the guidelines on standard terminology policy, terminology publication and guide development proposed by the International Organization for Standardization. Disaster safety standards were applied in order to build and utilize integrated management system of disaster safety standards through domestic and foreign cases. Throughout the result of this study, this study will contribute to the analysis and application of semantic knowledge based analysis throughout the ontology information linked the vocabulary to vocabulary by making the template of the disaster safety standards for easy to use and simple etc. This study is to expect traceability for the principle national disaster safety standards resource elements.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.32
• /
• pp.29-56
• /
• 2006

This article primarily concerns the various aspects of the rules to control express terms particularly in standard form which seek to absolve either wholly or in part from the seller's liability for non-conforming goods. It describes and analyzes in detail how English law regulates such terms. In this analysis, it places the following questions; first, whether each jurisdiction treats the seller's liability for non-conformity in quality and quantity as mandatory rules, second, if it does, to what extent it is treated so and third, if not, in what way it controls the seller's attempt to exclude or restrict his liability for non-conformity in quality and quantity. In addition, it attempts to compare the rules under English law with those under Korean law and to evaluate them in light of the discipline of comparative law. In an attempt to evaluate them, it asks the question of whether a solution from one jurisdiction may facilitate the systematic development and reform of another jurisdiction. The evaluation is based upon the idea that the problems of fairness associated with the use of standard terms occur where the customer is unfairly taken by surprise due to his ignorance of the terms, or where even if he knows of the substance of the terms and objects to it, he is met with a take-it-or-leave-it situation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.122-127
• /
• 2018

In an attempt to estimate the life projection of LED packages, IESNA published a paper regarding an LED package measurement test method in 2008, and a life projection technical document in 2011, to be used for LED life estimation. IESNA's publications regarding LED package measurement methods were functional, but they were not internationally standardized before 2017. In order to develop a standardized method, the International Standard chose to use the LM-80 as a measurement method for LED life projection in their publication in 2017. Many projection methods have been discussed by the IEC Technical Committee 34 working group, including the method using an exponential function, which reflects lumen degradation characteristics well. This study is designed to explore alternative LED package life estimation methods using an exponential function with statistical analysis, other than the one suggested by the International Standard.