• 설비공학논문집
• /
• 제30권4호
• /
• pp.175-185
• /
• 2018

This research investigates the internal flow and heat transfer in a plate heat exchanger with chevron shape by utilizing the computational fluid dynamics (CFD) software. The basic unit of the plate heat exchanger is generally composed of a hot channel, an intermediate chevron plate, and a cold channel. Several studies have reported experimental and numerical simulation of heat transfer and pressure drop. This study focused on the detailed numerical simulation of flow and heat transfer in the complicated chevron shape channel. The long chevron plate was designed to include 16 chevron patterns. For proper mesh resolution, the number of cells was determined after the grid sensitivity test. The working fluid is water, and its properties are defined as a function of temperature. The Reynolds number ranges from 900 to 9,000 in the simulation. A realizable $k-{\varepsilon}$ model and non-equilibrium wall function are properly considered for the turbulent flow. The friction factors and heat transfer coefficient are validated by comparing them with existing empirical correlations, and other patterned flow phenomena are also investigated.

• 한국지반신소재학회논문집
• /
• 제8권4호
• /
• pp.27-34
• /
• 2009

본 연구에서는 토목섬유가 층상으로 보강된 슬래그 재료의 전단강도와 변형특성을 다루었다. PET mat와 같은 토목섬유에 의한 보강이 슬래그의 전단강도와 변형특성에 미치는 영향을 조사 및 분석하기 위해 압밀배수 조건 하에서의 대형삼축압축시험을 수행하였다. 연구에 사용된 슬래그 재료는 현장에서 사용되는 재료와 동일한 재료로서 scale effect로 인한 문제점은 없었다. 토목섬유로 보강된 슬래그의 응력-변형율 거동은 무보강시 보다 다일러턴시의 양이 작고, 축변형율 증가시 항복 이후에도 축차응력이 증가하는 변형율경화(strain hardening) 거동을 나타내었다. 토목섬유로 보강된 슬래그 재료의 겉보기 점착력과 내부마찰각 등의 강도정수는 보강되지 않은 경우의 값보다 1.2-1.4배 정도 크고, 구속압 수준이 클수록 커지는 것으로 나타났다. 따라서 슬래그를 사용한 제방의 설계나 시공시 슬래그 재료에 토목섬유를 층상으로 보강하여 사용할 경우에는 강도증가 효과에 의해 안전율을 향상시킬 수 있을 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.66-71
• /
• 2010

With large specific strength and outstanding corrosion resistance and erosion resistance in sea water, titanium and titanium alloy are widely used in heat exchanger production. In particular, pure titanium demonstrates outstanding molding performance and may be considered optimal for production of heat exchanger. Since titanium is very vulnerable to oxidation and embrittlement during welding, processes with less heat input are widely used, and laser welding is widely applied by considering production performance and shield etc in atmosphere. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through oxygen and nitrogen quantitative analysis and hardness measurement, and evaluated welding performance and mechanical properties of butt welding. This study evaluated field applicability of lap welding to heat exchange plate of LPG re-liquefaction device for ships through tensile stress test, hardness test and internal pressure test etc after deducing optimal weding condition and applying to actual heat exchange plate. In bead overlap area, the experiment produced sound welds with no porosity or defect by increasing and decreasing laser power, and tensile-shear test results indicated virtually the same tension and yield strength as base metal. As a result of measuring hardness at lateral cross section and bead overlap zone of actual heat exchanger welds, hardness difference within 20Hv was produced at base metal, HAZ and weldment, and as a result of pneumatic and hydraulic pressure test, no leakage occurred.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.31-37
• /
• 2017

본 연구는 오존 방식 선박평형수 처리의 주요 장치인 기체-액체 이젝터에 대하여 구동 노즐의 유입부에 회전 운동 유도 장치에 의해 발생되는 구동 유체의 회전 운동이 이젝터 효율에 미치는 영향에 관한 연구이다. 먼저 배압에 따른 이젝터의 각 포트별 압력과 흡입 유량을 확인하기 위하여 실험 장치를 구성하고, 회전 운동이 없는 이젝터에 대한 실험 수행 및 데이터를 획득한다. 실험의 데이터를 바탕으로 격자 사이즈 비교를 통해 기체-액체 이젝터에 적합한 유한요소모델을 선정하였으며, 도출된 CFD 모델을 이용하여 구동 유체의 회전 운동이 이젝터의 흡입 효율을 향상시킬 수 있음을 확인하였다. 이를 바탕으로 이젝터의 흡입 유량을 높이기 위하여, 메타 모델을 이용한 크리깅 기법을 사용하여 회전 유도 장치의 내부 형상 인자인 전체 길이 l, 내부 직경 d, 날개 개수 n에 대한 구조 최적화를 수행한다. 최적화된 회전 유도 장치를 적용한 결과 구동 유체의 회전 운동이 없는 이젝터에 비해 이젝터 효율이 약 3% 가량 개선됨을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.630-631
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for two different models. Observation of flow characteristics, pressure and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was utilized to generate waves of desired properties and later the turbine section was integrated. The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.98.2-98.2
• /
• 2011

For optimal performance of a proton exchange membrane fuel cell (PEMFC), the membrane electrode assembly (MEA) requires hydration, and the membrane's conductivity depends on water content. A humidifier is required to ensure that the reactant gas, usually hydrogen and air, is hydrated before entering the fuel cell. Dry membrane operation or improper hydration causes performance degradation. Typically, the humidification of a fuel cell is carried out by means of an internal or external humidifier. A membrane humidifier is applied to the external humidification of transportation or residential power generation fuel cell due to its convenience and high performance. In this study, The experiments were constructed with a plate-type membrane humidifier in terms of geometric parameters and operating parameters. The results show that the temperature and pressure, the channel length, the membrane thickness and gas flow rate are critical parameters affecting the performance of the humidifier.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.97-100
• /
• 2007

Fuel Cell Stack performance, which is influenced by the maintenance of a constant internal environment, requires high levels of air tightness. Used for analysis, gasket for fuel cell is made of elastic rubber materials and placed over separator, and shape of deformation of a gasket affects the transformation separator and airtightness while fastening structure. Separator as made of steel sheet isn't broken under pressure but can affect gas and cool water flow by the plastic deformation process. Therefore， it is understood that assembly process is well developed in case distribution of stress and shape of deformation is shown uniformly. This study is conducted on the assumption that a fuel cell maintenance is advantageous in that conditions. In this paper, analyses of unit cell and partial model were performed and distribution of stress and shape of deformation of Gasket and separator were analyzed to evaluate the airtightness while fastening structure.

• 대한암한의학회지
• /
• 제11권1호
• /
• pp.31-39
• /
• 2006

Rhus Verniciflua Stokes has been used for long history to treat blood stasis and cancer in Oriental Medicine. But urushiol, a constituent of Rhus Verniciflua Stokes has T-cell mediated allergic reaction, so it has made clinical limitation. Nexia is allergen removed extract of Rhus Verniciflua Stokes and its extraction process as well as quality control is needed to be standardized. The optimized extraction condition is as follow; temperature is $90{\sim}95^{\circ}C$, volume of slovent 10 times, extraction time >6 hours, pressure $, slovnet water or EtOH(60%), yield 8.1${\sim}$9.8(w/w). HPLC pattern and isolation study showed Nexia contain fisetin(>13.0%), fustin(>7.0%) and no urushiol.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.27-33
• /
• 2010

Static analyses and buckling analyses were carried out for buried GFRP pipes by using finite element method. Vehicle loads, vertical and lateral soil pressures were considered as external loads, and supplying water pressure was considered as an internal load. Nine types of the factory-manufactured GFRP pipes were analyzed. Their maximum stresses and displacements were compared with the limit displacements and ultimate stress. Additionally, stress analysis on an enhanced flange, which was designed to reduce stress concentration, was performed. A cantilever analysis was carried out to know the maximum stress on the neck of the flange, which is the critical part. And a static analysis was carried for the buried flange. The test results showed that GFRP pipes were safe and stable against the external loads. And they showed that the enhanced flange decreased about 35% of the stress concentration.