• 제목/요약/키워드: internal relation

검색결과 789건 처리시간 0.032초

데데킨트 절단, 배중률, 관계

  • 홍성기
    • 논리연구
    • /
    • 제7권2호
    • /
    • pp.15-46
    • /
    • 2004
  • 표면은 서로 접촉하고 있는 두 개의 사물의 공통의 경계여야 한다; 그러므로 물의 표면은 물의 부분도 아니고 공기의 부분도 아니며, 또 이들 사이에 끼워진 그 어떤 물체도 아니다. 그렇다면 공기와 물을 갈라놓은 것은 무엇인가? 공기도 물도 아니며 실체가 없는 공동의 경계가 있어야만 한다는 것은 필연적이다. 왜냐하면 양자 사이에 끼워진 물체는 이들의 접촉을 막을 것이고, 물과 공기의 경우 이런 일은 일어나지 알고 있으며 그 어떤 매개체의 삽입 없이 접촉하고 있기 때문이다.

  • PDF

쌀의 품질평가 현황과 금후 연구방향 (Trend and Further Research of Rice Quality Evaluation)

  • 손종록;김재현;이정일;윤영환;김제규;황흥구;문헌팔
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.33-54
    • /
    • 2002
  • Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

제2형 당뇨병환자에서 말초신경병증과 인지기능항목의 상관관계 (Correlation between Peripheral Neuropathy and Cognitive Factors in Type 2 Diabetic Patients)

  • 양원열;김종국;박경원;서성환;이혜정;박미경
    • 생명과학회지
    • /
    • 제30권3호
    • /
    • pp.250-259
    • /
    • 2020
  • 당뇨병은 치매 및 인지기능장애의 주요 위험인자로 알려져 있다. 당뇨병성 말초신경병증은 제2형 당뇨병에서 가장 흔히 발생되는 합병증으로 본 연구는 말초신경병과 인지기능항복 간의 관련성을 확인하기 위함이었다. 2005년부터 2016년 10월 31일까지 동아대학교의료원에 내원한 제2형 당뇨병 환자들을 대상으로 후향적으로 의무기록지를 확인하여 신경전도검사와 신경인지기능검사를 시행한 환자 총 19명을 대상으로 하였다. 총 19명 대상환자의 평균 나이는 71.6±5.0세, 당뇨병 유병기간은 8.4±9.1년, 당화혈색소는 8.1±1.8%였다. 당뇨병성 말초신경병증이 동반된 환자는 전체 19명 중 7명(36.8%)이었다. Korean version of the Mini Mental State Examination (K-MMSE) 검사 결과 총점 24점 미만으로 정의한 인지기능저하를 동반한 환자는 19명 중 8명(42.1%)였다. 당뇨병성 말초신경병증 동반 군과 동반하지 않은 군 간에 K-MMSE 점수와 인지기능저하 동반율은 차이가 없었다. 인지기능저하 동반군과 동반하지 않은 군 간에 DPN 동반 비율도 각각 37.5%와 36.4%로 유의한 차이가 없었다. 인지기능항목과 유의한 상관관계를 보인 변수는 교육 기간이었으며, 교육기간이 길수록 높은 인지기능과 관련이 있었다. 인지항목 중 digit span-forward 만이 신경전도속도(CV)와 유의한 음의 상관관계를 보였다. 결론적으로 제2형 당뇨병 환자에서 교육기간이 길수록 높은 인지기능과 관련이 있었으며, 당뇨병성말초신경병증과 인지기능장애 간에는 유의한 상관 관계가 관찰되지 않았다. 향후 더 큰 규모의 전향적 연구가 필요하다.

대량객혈로 인한 기관지 동맥 색전의 중재적 방사선시술 (Interventional radiology of Bronchial artery embolization due to massive hemoptysis)

  • 민병윤;이상복
    • 한국방사선학회논문지
    • /
    • 제4권4호
    • /
    • pp.17-24
    • /
    • 2010
  • 호흡기 질환환자에서 비교적 흔한 증상인 객혈은 여러 치료법에도 불구하고 사망의 위험성이 높은 임상증상이다. 기관지색전술은 내외과적 치료에도 객혈이 멈추지 않을 경우, 즉각적인 지혈목적 외에도 수술이 불가능한 환자나 수술전 환자상태를 호전시키기 위한 시간을 얻기 위한 목적으로 매우 유용한 시술이다. 이와 관련하여 본 연구는 기관지동맥 색전술의 유용성에 대해서 알아보고자 한다. 대상은 J병원의 2007년 03월부터 2009년 12월까지 발생한 대량 객혈로 인한 기관지동맥 색전술을 시행한 60명으로 하였다. 이들은 하루 400ml이상, 한번에 200ml이상의 대량객혈이 있었거나 객혈양이 하루 400ml이하였지만 10일 이상의 내과적 치료에 반응하지 않았던 경우였다. 평균연령은 60.5세였으며, 원인질환별로는 결핵, 기관지확장증, 폐렴, 폐암 등이었다. 색전부위는 Rt bronchial artery 19예, Lt broncial artery, both bronchial artery, Rt Intercostobronchial artery, 여러 혈관을 동시에 시행한 경우였다. 색전물질은 PVA(conteour)와 microcoil을 이용하였다. 환자 60명중 76.6%에서는 시술 후 시간이 지남에 따라 출혈이 멈추었으며, 4예(6.6)에서는 시술 후 재출혈로 인한 재색전술을 시행하였다. 기관지 동맥 색전술은 객혈 치료에 있어서, 높은 조기 성공률과 객혈을 효과적으로 조절함으로, 대량 객혈로 인한 출혈에 효과적인 응급치료법으로 사망률을 줄이는 좋은 시술 방법이 될 것이다. 또한 일차적으로 내과적 치료와 같이 병행하여 시도한다면 대량 객혈로 인한 출혈에 효과적인 치료법으로 사망률을 줄이는 좋은 중재적 방사선 시술 방법이 될 것이다.

비소세포폐암조직에서 XIAP 발현과 고사지수 및 수술 후 예후와의 관계 (Relationship between Expression of XIAP Protein in Operable Non-small Cell Lung Carcinomas and Apoptosis Index and Postoperative Prognosis)

  • 김상현;이창훈;설미영;송진미;이종협;이민기;김종민
    • Tuberculosis and Respiratory Diseases
    • /
    • 제58권5호
    • /
    • pp.480-489
    • /
    • 2005
  • 연구 배경 : 세포자멸사의 장애는 발암, 암의 진행, 화학치료시 내성 등에 중요한 역할을 한다. XIAP는 IAP군 중에 가장 강력한 caspase 억제제로 알려져 있다. 본 연구는 비소세포폐암에서 XIAP의 면역조직화학적 발현이 종양진행이 환자생존율에 미치는 영향을 확인해 보고자 시행되었다. 방 법 : 수술적 절제가 시행된 80예의 비소세포 폐암종의 조직에서 XIAP의 면역 조직학적 발현을 조사하여 임상병리학적 인자들[환자의 연령, TNM 병기, TNMpT, TNM-pN, VEGF, microvessel density(MVD), PCNA index, apoptotic index (AI)]과 생존율과의 연관을 분석하였다. 결 과 : 편평세포암종 46예 중 42예(91.3%)에서, 샘암종 34예 중 21예(61.8%)에서 양성을 보여 종양의 조직형별 비교시 편평세포암종은 샘암종에 비해 유의하게 높은 XIAP의 발현을 보였다(p=0.001). 각 조직형내에서 비교시 샘암종의 경우 XIAP는 58세이상의 고 연령군 및 VEGF의 발현과 유의한 상관관계를 보였지만(p=0.028, p=0.014, respectively) 편평세포암종의 경우 XIAP는 모든 임상병리학적 인자들과 상관관계를 보이지 않았다. TUNEL 염색으로 결정된 AI는 XIAP 양성군이 $2.5{\pm}4.9%$, XIAP 음성군이 $18.5{\pm}28.9%$로서 후자에서 유의하게 높은 수치를 보였다(p=0.001). AI는 XIAP를 제외한 다른 임상병리학적 인자들과는 상관관계를 보이지 않았다. 생존 여부의 확인이 가능했던 72예에서 XIAP 음성군의 중앙 생존기간은 29.89개월, XIAP 양성군의 중앙 생존기간은 42.5개월로서, 후자에서 술 후 생존 기간은 더 길었지만 통계학적 차이를 보이지는 않았다. 결 론 : 비소세포폐암종에서 XIAP는 종양의 조직형, 특히 편평세포암종에서 높은 발현과, 종양의 AI와 역의 상관관계를 보였다. 그러나 XIAP의 발현이 임상병리학적 예후인자들 및 생존율과 유의한 관련성을 보이지 않은 것은 생체 조직에서 XIAP의 생물학적 역할은 매우 복잡할 수 있다는 것을 암시하므로 향후 이의 생물학적 역할과 관련 물질들에 대한 연구가 좀 더 진행되어야 할 것으로 사료된다.

외항선사의 북극해항로 진출에 관한 결정요인 분석 (The Analysis on the Determinants of Shipping Lines's entering the Arctic Sea Route)

  • 손경령
    • 한국항만경제학회지
    • /
    • 제35권4호
    • /
    • pp.1-16
    • /
    • 2019
  • 지구 온난화에 따른 북극해의 해빙면적이 감소하면서, 북극해를 통한 선박 운항의 상용화 문제가 지속적으로 주목받고 있다. 특히 아시아와 유럽을 있는 북동항로의 경우, 기존의 수에즈항로에 비해 거리적으로 훨씬 짧음에 따라, 전통적인 항로를 대체할 항로로 그 경제성에 대한 많은 선행연구들이 진행되고 있으며, 많은 연구들이 경제성에 긍정적인 결과를 내놓고 있다. 하지만, 2013년부터 2019년까지의 추세를 보았을때, 실질적으로 북동항로를 통과한 화물(Transit Cargo)의 증가는 크게 이루어지지 않았다. 이러한 상황에서 본 연구는 외항선사 중 외국 선사 2곳과, 국적 선사 2곳의 임원을 대상으로 심층 인터뷰와, 인터뷰의 결과를 따른 4가지 상위기준으로 컨테이너 운송의 내부적 제약요인, 외부적 제약요인 그리고 외항선사의 내부 조직의 목표와 비전, 북극해항로 이용을 통한 경제성을 선정하였고, 각 상위기준 별 하위기준을 4~5가지로 추출하여 총 17가지 하위기준의 중요도를 계층분석법으로 실증하였다. 상위기준의 첫째는 선사의 비전과 목표로 선사가 신 시장을 창출하는데 북극의 가치와, 요구되는 선사의 의지 및 역량을 평가하는 내부적 강점이다. 둘째, 선사의 북극해항로 진출에 관련한 내부 제약성으로 북극해항로에 진출에 대한 부정적 요인과 선사의 역량적 한계를 유발하는 내부적 약점을 의미한다. 셋째, 북극해항로 이용으로 인한 경제성으로 북극해의 미래 경제적 가치와 북극해 연안국으로부터 북극해 및 북극 진출과 개발과 관련한 협력으로 선사에게 제공되는 외부적 기회 요인이다. 마지막으로 북극해항로의 외부제한성으로 북극해항로 이용하기까지 해결되어야 할 외부적 선결 과제로 기상조건과 연안국의 통항정책, 그리고 북극해 주변국의 북극해항로 관심의 증대로 인한 새로운 경쟁의 장이 생성될 가능성을 의미한다. 분석의 결과로 외국적 외항선사와 국적 외항선사로 구분하여 북극해항로 진출에 관한 국내외 외항선사 상호 간 북극해항로 진출에 관한 결정요인에 대한 인식차이를 파악하였다. 이러한 결과로 북극해항로를 운송 상의 제약점, 진출 기회요인에 관한 각 선사별 견해와 함의를 이끌어냈으며, 외항선사의 북극해 진출과 북극해운송의 원활한 이용을 위해 선사들의 대응과, 협력 및 원활한 통항을 위하여 정부 간의 협력의 필요성을 제시하였다.

한국인 폐암 환자에 대한 p53 및 Rb유전자의 다형성 분석 (Analysis of p53 and Retinoblasoma(Rb) Gene Polymorphisms in Relation to Lung Cancer in Koreans)

  • 이경상;손장원;양석철;윤호주;신동호;박성수;이정희;이춘근;조율희
    • Tuberculosis and Respiratory Diseases
    • /
    • 제44권3호
    • /
    • pp.534-546
    • /
    • 1997
  • 연구배경 : p53 및 망막모세포 암종(Rb) 항암 유전자는 인체의 여러 임종의 발암 과정에 관련되는 것으로 잘 알려져 있다. 또한 최근에 p53 등의 유전자 다형성이 암 발생에 관여하는 것으로 보고되고 있다. 그러나 Rb 유전자 다형성이 폐암 발생에 영향을 주는지는 아직 보고된 바가 없어 이들 유전자의 다형성의 반도 및 흡연 관련 폐암과 이들 유전자의 다형성과의 관계를 알아보고자 했다. 방 법 : 한국인 폐암 환자 발생의 유전적 감수성을 결정하기 위하여 128명의 폐암 환자군과 145명의 대조군에 대한 p53 유전자(exon 4 및 intron 6 부위) 및 망막모세포 암종(retinoblastoma, Rb) 유전자(intron 17 부위)의 다형성을 분석하였다. p53 유전자의 16bp 반복 다형성을 제외한 유전자 분석은 중합효소연쇄반응-제한효소절편길이 다형현상(PCR-RFLPs)을 이용하였으며, 16bp 반복 다형성은 중합효소연쇄 반응 후 전기영동으로 직접 분석하였다. 결 과 : p53 유전자의 exon 4/AccII 다형성 : 대조군 및 환자군에 대한분석에서 다형적인 3가지 유전자형(Arg/Arg, Arg/Pro, Pro/Pro)이 관찰되었으며, Arg과 Pro 유전자 빈도는 각각 0.66, 0.34 였다. 폐암 환자군에서는 대조군에 비해 Arg/Pro 유전자형은 높고, Pro/Pro 유전자형은 낮게 관찰되었으나 통계적으로 유의하지는 않았다. 조직학적으로 소세포 폐암의 경우 유전자형의 분포가 대조군과 유의한 차이를 보였다. p53 유전자의 intron 3/16bp 중복 다형성 : 대조군과 환자군에서 156bp 동형 접합체와 156bp와 172bp의 이형 접합체만이 관찰되었으며, 172bp 동형 접합체는 관찰되지 않았다. 156bp와 172bp 대립인자 각각 0.98, 0.02로 172bp 대립인자의 빈도가 아주 낮았다. 전반적으로 폐암 환자군과 대조군간의 유전자형 분포에는 유의한 차이가 없었다. p53 유전자의 intron 6/MspI 다형성 : Intron 3의 16bp 중복 다형성과 완전 연관 관계에 있었으며, m1 동형접합체와 m1/m2 이형접합체만 관찰 되었다. 16bp 중복 다형성에서와 같이 m1, m2의 유전인자의 빈도는 각각 0.98, 0.02 으로 MspI 절단부위가 없는 m2 대립인자의 빈도가 아주 낮았다. 전반적으로 폐암환자군과 대조군간의 유전자형 분포에는 유의한 차이가 없었다. Rb 유전자의 intron 17/XbaI 다형성 세가지 다형적인 유전자형(r1/r1, r1/r2, r2/r2)이 관찰 되었으며, 대조군에서 r1, r2의 유전자 빈도는 각각 0.50, 0.50 이었다. 유전자형의 분포가 조직학적으로 흡연관련 폐암군(Kreyberg type I)과 대조군 또는 폐 선암종군 사이에는 통계적으로 유의한 차이를 보였다(p < 0.05). Kreyberg type I군에서는 폐 선암종군에 비해 동행접합체(r2/r2 또는 r1/r1) 빈도가 높고 이형접합체(r1/r2) 빈도는 유의하게 낮은 반면, 선암군에서는 이형접합체 빈도가 73.4%로 특징적으로 높았다. 또한 고흡연자군에서의 유전자형의 비흡연자를 포함한 저흡연자군의 유전자형 분포와 유의한 차이를 보였으며(p = 0.0258), 이형접합체의 빈도가 유의하게 낮게 검출되었다. 따라서 Rb 유전자의 유전자형이 이형접합체인 경우 흡연관련 폐암 발생 위험이 감소되며, 동형접합체일 경우는 상대적으로 발생 위험이 증가되는 것으로 판단된다. 결 론 : 이상의 결과를 종합해보면, p53 유전자의 다형성 보다는 Rb 유전자 다형성이 한국인의 흡연관련 폐암발생의 유전적 감수성 결정에 밀접한 관련이 있을 것으로 사료되며, 앞으로 보다 명확한 연관관계 규명을 위해서는 다른 인종 및 더 많은 수의 환자군에 대한 분석이 요망된다.

  • PDF

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

핵의학 검체검사 정도관리의 개선을 위한 Westgard Multi-Rules의 적용 (Application of Westgard Multi-Rules for Improving Nuclear Medicine Blood Test Quality Control)

  • 정흥수;배진수;신용환;김지영;석재동
    • 핵의학기술
    • /
    • 제16권1호
    • /
    • pp.115-118
    • /
    • 2012
  • Levey-Jennings 정도관리는 측정치가 관리 허용치(평균 ${\pm}2SD$ 또는 ${\pm}3SD$)를 벗어나는 우연오차만 관리를 했었다면, Westgard Multi-Rules 정도관리는 우연오차와 계통오차의 분리분석을 할 수 있고 복합적용이 가능해 병원 인증 내부정도관리에서도 적극 권장하고 있다. 하지만 검체검사 정도관리에서는 kit 내 같은 기질의 정도관리 물질을 사용해 계통오차의 인지가 쉽지 않고 잦은 농도 변경으로 목표치 설정이 어려워 Westgard Multi-Rules의 적용이 힘들었다. 따라서 본 연구는 정도관리 물질을 상용화된 제 3의 물질을 사용해 신뢰성 있는 목표치를 산출하고 Westgard Multi-Rules을 적용함으로써 정도관리를 개선하고자 한다. 갑상선 검사인 Total T3를 대상으로 정도관리 물질을 B사의 Immunoassay Plus Control Level 1, 2, 3를 사용하여 ${\pm}2SD$를 벗어난 값을 제외한 1개월 동안 295회 데이터의 평균값으로 목표치를 설정하였다. 그리고 20일간 총 194회 실험의 정도관리 물질 측정치를 표준편차 지수를 이용하여 하나의 관리도상에 놓고 Westgard Multi-Rules 중 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T의 규칙들을 적용하여 우연오차와 계통오차를 분리하여 분석하였다. Total T3의 목표치는 정도관리 물질 1, 2, 3번이 각각 84.2 ng/dl, 156.7 ng/dl, 242.4 ng/dl로 설정되었고 표준편차는 각각 11.22 ng/dl, 14.52 ng/dl, 14.52 ng/dl로 설정되었다. 설정된 목표치를 기준으로 Westgard Multi-Rules을 적용한 뒤 유형을 분석한 결과 우연오차인 12s가 48회, 13s가 13회, R4s가 6회로 분석되었고 계통오차인 22s는 10회, 41s가 11회, 2 of 32s가 17회, $10\bar{x}$가 10회로 분석되었으며 7T는 적용되어지지 않았다. 통제 불가능한 우연오차의 유형들은 전체실험과정을 재확인하고 재검사 비중을 높이는 등의 조치를 취하였으며 통제 가능한 계통오차의 유형들은 원인을 찾아 조치사항 양식에 기록하고 필요 시 내부정도관리 위원회에 보고하였다. 상용화된 제 3의 물질을 정도관리 물질로 사용하고 목표치를 설정함에 따라 하나의 관리도 상에서 3가지 정도관리 물질에 대한 Westgard Multi-Rules의 적용이 가능하게 되었고, 그 결과 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T 규칙들의 분석으로 우연오차와 계통오차의 정밀분석이 가능해 졌다. 또한 ${\pm}3SD$ 내의 모든 데이터를 분석 할 수 있어 Error 검출을 최대화 할 수 있게 되었다. 이와 같이 체계적으로 Westgard Multi-Rules을 적용한 정도관리는 검체검사의 정도관리에 질적 향상을 가져다 줄 것이다.

  • PDF