• 제목/요약/키워드: internal reduction

검색결과 1,548건 처리시간 0.032초

섬유보강이 콘크리트의 역학적 특성과 철근콘크리트의 균열성상에 미치는 영향에 관한 연구 (Studies on the Effect of Fiber Reinforcing upon Mechanical Properties of Concrete and Crack Mode of Reinforoed Concrete)

  • 박승범
    • 한국농공학회지
    • /
    • 제20권2호
    • /
    • pp.4645-4687
    • /
    • 1978
  • This study was attempted to investigate the mechanical properties of concrete and crack control effects of reinforced concrete with steel and glass fiber. The experimental program includes tests on the properties of fresh concrete containing fibers, compressive strength, tensile strength, flexural strength, Young's modulus, Shrinkage and deformation of steel or glass fiber reinforced concrete. Also this study was carried out to investigate the effect of steel or glass fiber to retard the development in reinforced concrete subject to uniaxial tension and thus facilitate the use of steels of higher strength. The major conclusions that can be drawn from the studies are as follows: 1. The effect of the fibers in various mixes on fresh concrete confirmed that fibers do have a significant effect on the properties of fresh concrete, bringing much more stable and exhibiting a signiflcant reduction in surface bleeding, and that the cohesion is greatly improved and the internal resistance increases with fiber concentration. But the addition of an excess contents and length of fibers brings about the reduction of workability. 2. With the addition of steel fibers(1.5% Vol.) to concrete, the compressive strength as compared with plain concrete showed a very slight increase, but excess addition, over 1.5% Vol. of steel and glass fiber reduced its strength. 3. Splitting tensile strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. In case of containing steel fiber (2.5%, 30mm), it showed that the maximum increase rate of 1.48 times as much rate, and in case of containing glass fiber (2.5%, 30mm), the increase rate of strength was 1.25 times as much rate. 4. Flexural strength of fiber reinforced concrete showed a significant tendency, as compared with plain concrete. Containing steel fiber (2.5%, 30mm) showed the maximum increase rate of 1.64 times as much rate and containing glass fiber (2.5%, 30mm) showed the increase rate of strength of 1.32 times as much rate, and in general, the 30mm length brougth the best results. 5. The strength ratio ($\sigma$b/$\sigma$c and $\sigma$t/$\sigma$c) increased, when steel fiber's average spacing was up to 3.05mm, but decreased when beyond 3.05mm, and it was confirmed that tensile or flexural strengths of steel fiber reinforced concrete are apparently governed by fiber's average spacing. 6. The compressive strain of fiber reinforced concrete showed a significant increasing tendency as the fiber was added, but Young's modulus. with the addition of steel and glass fibers, showed a slight decrease tendency. And according to the increase of flexural strength, a considerable increase was seen in toughness. 7. With the addition of fiber's the shrinkage of concrete was significantly decreased, in both case of adding steel fibers 12.5%, 30mm, and showed a significant decrease ratio, in average 30.4% and 36.7%, as compared with plain concrete. 8. With the increase of fiber volume fraction and length, the gained stress in reinforcing bar in concrete specimens increased in all crack widths, but at different rates, with the decrease of fiber diameter, the stress showed a considerable increasing tendency. And the duoform steel fibers showed the greatest improvement, as compared with the other types tested. 9. The influence of fiber dimensions in order of significanse on the machanical properties of concrete and the crack control of reinforced concrete was explained as follows: content, length, aspect ratio and dimeter.

  • PDF

유입량 변화에 따른 도심지 내 우수저류조 관망시스템의 안정성 검토 (Hydraulic Stability Examination of Rainwater Reservoir Pipe Network System on Various Inflow Conditions)

  • 유형주;김동현;맹승진;이승오
    • 한국방재안전학회논문집
    • /
    • 제12권4호
    • /
    • pp.1-13
    • /
    • 2019
  • 최근 기후변화로 인해 강우강도 및 빈도의 증가에 따른 국지성 집중호우의 피해가 증가함에 따라 초기 우수에 대응할 수 있는 시설물 설치가 필요한 실정이다. 이를 위해, 빗물을 직접 유출하지 않고 저류 시키는 저영향 개발(Low Impact Development)기법을 적용한 시설물 설계 및 수치모형을 이용한 유출저감효과 검토에 관한 연구가 많이 진행되어 왔다. 그러나 대부분의 연구는 유출저감효과에 대한 검토만 수행된 반면, 시설물에 유입되는 유량에 의한 흐름특성 변화 검토 및 안정성 검토에 관한 연구는 미비한 실정이다. 이에 본 연구에서는 LID 기법이 많이 적용되고 있는 회전교차로를 대상으로 하여, 회전교차로 내의 우수저류조의 관망시스템의 안정성 검토를 3차원 수치모형인 FLOW-3D를 사용하여 검토하였다. 또한 우수저류조의 최적의 설계방안 도출을 위하여 우수저류조의 수를 증가하여 용량증가에 따른 유속과 동압의 변화를 검토하고 설계기준과 비교하였다. 우수저류조의 제원 및 유입유량은 선행연구에서 제시된 값을 적용하여 수치모의를 수행한 결과, 유속은 저류조 설치개소 수가 증가할수록 빨라지는 것을 확인하였고, 대부분 설계기준 범위 안에 유속이 형성되는 것을 확인하였다. 다만 추가 저류조가 3개 이상일 경우는 추가저류조관에서 유속이 3.44 m/s가 발생하여 설계유속의 허용범위를 초과하였고, 유속의 증가율도 일정해지는 것으로 나타났다. 난류강도 및 바닥전단력 비교의 경우, 저류조 설치 개소수가 증가함에 따라 바닥전단력이 한계소류력보다 크게 나타나 유입토사의 침전은 발생하지 않을 것으로 예상되나 난류강도의 크기가 작아져 플록(Floc)형성으로 인한 토사 침전이 발생할 수 있음을 고려해야한다. 최종적으로 유속을 이용한 동압 산정 결과를 우수관 설계에 일반적으로 사용되는 압력관의 허용내압과 비교하였을 경우, 동압이 허용내압보다 작게 나타났다. 이를 통하여 본 연구에서 제안한 우수저류조 제원으로 설계할 경우 추가 저류조를 2개까지 설치하는 것이 가장 적합한 것으로 나타났다. 이는 저류조를 계속하여 설치하게 되면 배수가 원활해져 관내 유속이 빨라지고, 유속증가로 인하여 관의 마모손상 등의 문제가 일어날 수 있기 때문이다. 그러나 본 연구는 저류조의 제원 및 우수의 유입량을 가정하였고, 단순히 저류조를 추가하여 저류조 설계방안을 도출한 한계점이 있어 향후에는 다양한 저류조 형태 및 우수유입 시나리오를 적용하여 검토한다면 보다 효율적인 설계방안 도출이 가능할 것으로 기대된다.

우리나라 직장인 스트레스의 역학적 특성 (Epidemiology of Psychosocial Distress in Korean Employees)

  • 장세진;강명근;차봉석;박종구;현숙정;박준호;김성아;강동묵;장성실;이경재;하은희;하미나;고상백
    • Journal of Preventive Medicine and Public Health
    • /
    • 제38권1호
    • /
    • pp.25-37
    • /
    • 2005
  • Objective : To estimate the magnitude of psychosocial distress and examine eligible factors associated with the development of psychosocial distress in Korean employees, using a nationwide sample. Methods : A total of 6,977 workers were recruited from 245 companies. A structured questionnaire was used to assess sociodemographics, health-related behaviors, job characteristics, social support at work, personality traits (locus of control, type A behavior pattern), self-esteem, and psychosocial distress. Results : The results showed that 23 % of workers were categorized as high stress, 73% as moderate, and 5% as normal. Hierarchical multiple regression analysis showed that psychosocial distress was more common in younger workers, both male and female. Regular exercise was negatively associated with increase of psychosocial distress. In job characteristics, as expected, low decision latitude, high job insecurity, and low social support at work were related to high psychosocial distress. Personality traits such as locus of control and type A behavior pattern, and self-esteem were more powerful predictors of psychosocial distress than general characteristics, health-related behavior, and job characteristics. There were some gender differences. While men who are less educated and single (unmarried, divorced, and separated) experienced higher levels of psychosocial distress than those who are educated and married, women who feel high job demand experienced higher levels of psychosocial distress than those who feel low job demand. Conclusions : The proportion of the high stress group was higher than expected, and psychosocial factors like social support and personality characteristics (e. g. locus of control, type A behavior pattern and self-esteem) were more significant factors for psychosocial distress than other variables. This finding suggests that some psychosocial factors, especially inadequate social support, low self-esteem and lack of internal locus of control for the development of psychosocial distress, will also operate as an intervention strategy in the worksite stress reduction program. It is strongly required that worksite stress reduction programs should be established in at both occupational and level as well as in individual levels.

노년층에서 대퇴경부 골절의 치료 (A Clinical Analysis of Femur Neck Fracture in Elderly Patients)

  • 인주철;안면환;서재성
    • Journal of Yeungnam Medical Science
    • /
    • 제2권1호
    • /
    • pp.11-22
    • /
    • 1985
  • 본 영남의대 정형외과학 교실에서는 1983년 5월부터 1985년 2월말까지 치료한 노년층의 대퇴경부 골절 환자 30예 중 추시가 가능했던 18예를 골절의 양상 및 치료 방법에 따라 분석한 결과를 요약하면 다음과 같다. 1. 총 18예 중 여자가 11예, 남자 7예로 고령의 여자에 호발하였다. 2. 60대 이상의 골절 11예 중 8 예가 경도의 외상에 의하였고 4 예가 심각한 골조송증을 동반하였다. 3. 골절의 양상으로는 총 18예 중 4 예가 비전위 골절, 11예가 전위된 골두하 골절, 3 예가 전위된 중간경부 골절이었다. 특히 60대 이상의 골절 11예는 3예가 비전위 골절, 나머지 8 예가 전위된 골두하 골절이었다. 4. 치료 방법은 총 18예 중 13예에서 도수정복 및 다발성 철침 고정술을 시행하였고, 4예에서 대퇴골두 치환술을 1예에서 특별한 처치를 하지 않았다. 5. 내고정술을 시행한 비전위 골절 4예에서는 합병증을 초래하지 않았고, 전위된 골절 9예 중 4예에서 합병증을 초래하였는데 전 예가 전위된 골두하 골절이었다. 6. 전위된 골두하 골절로 내고정술을 시행한 6 예중 3예에서 3일이내에 치료하였는데 이 중 l 예에서 과내반 정복 상태로 합병증을 초래하였고 3일 이상 지연된 3예에는 전 예에서 합병증을 초래 하였다. 7. 전위된 골두하 골절 6예 중 과외반 정복된 2예에서는 합병증이 발생하지 않았고 과내반 정복된 3예와 수상후 1주일 이후에 양호한 정복 상태인 1예 모두 합병증이 발생하였다. 노년기의 대퇴경부 골절 환자의 치료시에 합병증의 발생은 대개 골절의 양상 및 치료 시기에 의해 결정되며, 내고정술시에는 조속한 시간내에 해부학적 정복 혹은 외반 정복을 시도하는 것이 바람직하며 특히 고령의 환자에서 전위된 골두하 골절로 치료의 지연, 정복의 불가능, 과내반 정복 및 고관절에 기존 질병이 있는 경우에는 일차적인 대퇴골두 치환술 혹은 고관절 치환술이 바림직할 것으로 사료된다.

  • PDF

기관지천식환자에서 다형핵구의 과산화 음이온 생성능이 폐포세포 손상에 미치는 영향 (The Effect of Superoxide Anion Production by PMN on Pneumocyte Injury in Patients with Bronchial Asthma)

  • 김영균;박성학
    • Tuberculosis and Respiratory Diseases
    • /
    • 제40권3호
    • /
    • pp.213-222
    • /
    • 1993
  • 연구배경 : 기관지천식은 일종의 염증성 질환으로서 다형핵구가 병태생리에 중요한 역할을 하는 것으로 알려져 있다. 특히 다형핵구로부터 생성되는 독성산화물들은 기도 및 폐조직 손상을 야기시켜 기관지 천식의 병인에 기여하는 것으로 알려져 있으나, 이에 대한 실질적인 증거가 아직 부족할 뿐아니라 이들이 폐조직손상을 일으키는 기전 또한 불분명하다. 이에 저자들은 기관지천식환자들의 다형핵구로부터 생성되는 과산화 음이온이 실제로 폐포세포손상에 중요한 역할을 하는지 여부와 과산화 음이온이 폐포세포 손상을 일으키는 기전을 보다 명확히 하고자 본 연구를 시작하였다. 방법 : 임상적으로 안정된 12명의 기관지천식환자와 5명의 정상인들을 대상으로 하였으며, 말초혈액 다형핵구는 말초혈액으로부터 dextran 침강법 및 Ficoll-Hypaque 밀도차 분리법을 이용하여 분리하였다. 다형핵구의 과산화 음이온 생성능 및 혈장 SOD 활성도는, 과산화 음이온이 cytochrome c를 환원시켜 나타나는 발색반응을 이용하여 분광측정법으로 측정하였으며, 다형핵구의 A549 폐포세포에 대한 세포독성작용은 $^{51}Cr$ release assay로 측정하였으며, A549 lysis 및 A549 detachment 두가지 측면에서 관찰하였다. 결과 1) 다형핵구의 과산화 음이온 생성능은 천식환자군이 정상군에 비해 현저히 높았으며 ($2.81{\pm}0.95$$6.65{\pm}0.58\;mmol/1{\times}10^6$ cells, p<0.05), 각 환자의 $FEV_1$과는 역상관관계를 보였으나 (R=-0.63, p<0.05), $PC_{20}$ histamine과는 상관관계가 없었다. 2) 혈장 SOD 활성도는 천식환자군이 정상군에 비해 다소 감소되어 있는 경향을 보였으나 통계학적 의미는 없었으며, 각 환자의 $FEV_1$과는 상관관계를 보였으나(R=0.63, p<0.05) $PC_{20}$ histamine과는 상관관계가 없었다. 3) 정상군에서는 혈장 SOD 활성도와 다형핵구의 과산화음이온 생성능간에 의미있는 상관관계를 보였으나(R=0.88, p<0.05), 천식환자군에서는 상관관계가 없었다. 4) 두군 모두에서 다형핵구에 의한 A549 폐포세포의 손상형태가 lysis 보다는 detachment가 더욱 현저한 경향을 보였으며, 두가지 모두 천식 환자군에서 다소 높은 경향을 보였다. 또한 두군 모두에서 SOD 전처치에 의해 A549 detachment는 현저하게 억제되었으나 A549 lysis는 억제되지 않았으며, 두가지 모두가 혈창 전처치에 의해서는 억제되지 않았다. 5) 두군 모두에서 다형핵구의 과산화 음이온 생성능과 A549 detachement와는 유의한 상관관계가 있었으나(정상군 : R=0.90, 환자군 : R=0.82), A549 lysis와는 별로 상관관계가 없었으며, 혈장 SOD 활성도는 상관관계를 보이지 않았다. 또한 천식환자군에서 A549 lysis나 A549 detachment는 환자의 $FEV_1$ 도는 $PC_{20}$ histamine과는 의미있는 상관관계를 보이지 않았다.6) 다형핵구에 의한 폐포세포손상의 양상에 있어서 알레르기성 천식환자와 비알레르기성 천식환자 사이에는 의미있는 차이가 없었다. 결론 : 이상의 연구결과 다형핵구로부터 생성되는 과산화 음이온에 의한 기도 및 폐조직 손상이 기관지천식의 병인에 부분적으로 영향을 미칠 것으로 생각되며, 과산화 음이온은 주로 폐포세포의 탈락을 야기시킴으로써 폐포세포 손상을 일으키는 것으로 추측된다.

  • PDF

스프린팅이 하악 구치부 임플랜트 보철물의 응력분산에 미치는 영향에 관한 삼차원 유한요소분석 연구 (A three-dimensional finite-element analysis of influence of splinting in mandibular posterior implants)

  • 백상현;허성주;장익태;곽재영;김성균
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.157-168
    • /
    • 2008
  • 연구목적: 골유착성 임플랜트를 이용한 치료가 초기의 완전 무치악 증례에 도입된 이후 장기간의 임상 관찰 결과 높은 성공률이 보고되고 있으며, 점차 부분 무치악 및 단일치 상실 증례 등의 다양한 영역으로 확대되고 있다. 하지만 이러한 임플랜트에 가해지는 저작압은 임플랜트와 주위 골에 축 방향 힘 (axial force)과 다양한 측방 모멘트 (bending moments)를 일으키는데 이러한 응력의 적절한 분산이 치료의 성공에 큰 영향을 미치게 한다. 이번 연구의 목적은 하악 구치부가 부분 무치악일 때 외측연결 방식과 내측연결 방식의 임플랜트로 수복함에 있어 상부 보철물의 연결 (splinting)이 임플랜트와 주위 골로의 응력분산에 미치는 영향을 삼차원 유한요소 분석을 통해 비교해보고자 하였다. 연구재료 및 방법: 외측연결 방식과 내측연결 방식의 대표적인 2종의 임플랜트를 선정하였고 각각 8.5mm와 13mm 길이에 대하여 실험하였다. 임플랜트는 외측연결 방식을 대표하는 브레네막 시스템을, 내부연결 방식을 대표하는 ITI 임플랜트를 연구재료로 선택하였다. 각각의 임플랜트는 구치부에서 골양이 허용되는 한 추천되는 넓은 직경 (wide diameter)의 임플랜트 (4.8-5.3mm)를 이용하였다. 이러한 4종류의 임플랜트 모형에서 제1대구치와 제2대구치 금관의 연결 여부에 따라 총 8개의 실험 군으로 분류하였다. 하중은 수직하중 및 수평하중을 각각 100N씩 하악 제1대구치 임플랜트 보철부위 (금관부)에 가하였고 금관의 연결여부에 따라 임플랜트와 주위골에 응력이 분산되는 양상을 관찰하였다. 삼차원 유한요소분석을 위한 하악골모형 제작에는 Hypermesh (Altair Engineering Inc., Troy, MI, USA)를 사용하였고 응력해석을 위해서는 PAM-CRASH 2G version 2005 (ESI, France), 포스트프로세싱을 위해서는 PAM-VIEW version 2005 (ESI, France)을 이용하였다. 여러 응력값 중에서 대표적인 등가응력 (von Mises stress)을 이용하여서 응력분포를 비교분석하였다. 연구결과: 내부연결방식과 외부연결방식 모두 상부의 금관을 연결함에 따라 임플랜트와 주위골로 전해지는 응력값이 감소하였다. 그리고 응력값이 감소하는 정도는 외부연결방식에서 더 크게 나타났다. 하지만 두 방식 모두 금관연결에 따른 응력 감소 효과는 임플랜트 길이 증가에 의해 영향 받지는 않았다. 이번 실험에서 상부 보철물이 연결되지 않은 상태에서 제1대구치 부위에 수직방향 또는 수평방향의 하중을 가했을 때 외부연결방식에서 더 많은 양의 응력이 주변 피질골의 상부 좁은 부위로 전달되었다. 하지만 상부 보철물을 연결한 상태에서 하중을 가한 경우에는 외부연결방식에서 하중 측인 제1대구치 부위에서 나타나던 상부 피질골에서의 응력 집중이 많이 감소한 것을 보여주었다. 또 한 비하중 측인 제 2대구치 부위에서의 응력분산도 외부연결방식에서 더 많은 것으로 나타났다. 이에 비해 내부연결방식에서는 하중 측인 제 1대구치 부위에서 지대주 나사를 따라 높게 나타나던 응력값의 중등도 감소 효과를 나타내었고 연결된 제2대구치 부위로의 응력분산 효과도 작았다. 결론: 하악 구치부가 결손한 하악골에 내부연결방식과 외부연결방식을 대표하는 두 가지 종류의 임플랜트를 선택하여 상부 금관의 연결이 임플랜트와 주위 골의 응력 분산에 미치는 영향에 대하여 삼차원 유한요소분석을 하였다. 이러한 실험 결과를 통하여 다음과 같은 결과를 얻었다. 1. 8.5mm와 13mm에 대해서 응력 분포는 거의 동일하게 나타나고, von Mises stress 최대값 또한 거의 유사하였다. 2. 수직하중에서는 근심측에서 응력이 집중되었고 수평하중에서는 근, 원심측이 비슷한 크기의 응력을 보였다. 3. 내부연결방식에서는 지대주 나사의 벽면을 따라서 응력이 분산되는 양상을 보였으나 외부연결방식에서는 지대주에 눌리는 임플랜트 상부 부위에 응력이 집중되었다. 4. 금관을 연결함에 따라 임플랜트와 주위골로 전달되는 응력 값은 두 방식 모두 감소하는 모습을 보였으나 응력 값이 감소하는 정도는 내부연결방식에 비해 외부연결방식에서 더 크게 나타났다.

인공지능 기술 기반 인슈어테크와 디지털보험플랫폼 성공사례 분석: 중국 평안보험그룹을 중심으로 (Analysis of Success Cases of InsurTech and Digital Insurance Platform Based on Artificial Intelligence Technologies: Focused on Ping An Insurance Group Ltd. in China)

  • 이재원;오상진
    • 지능정보연구
    • /
    • 제26권3호
    • /
    • pp.71-90
    • /
    • 2020
  • 최근 전 세계 보험업계에도 기계학습, 자연어 처리, 딥러닝 등의 인공지능 기술 활용을 통한 디지털 전환이 급속도로 확산하고 있다. 이에 따라 인공지능 기술을 기반으로 한 인슈어테크와 플랫폼 비즈니스 성공을 이룬 해외 보험사들도 증가하고 있다. 대표적으로 중국 최대 민영기업인 평안보험그룹은 '금융과 기술', '금융과 생태계'를 기업의 핵심 키워드로 내세우며 끊임없는 혁신에 도전한 결과, 인슈어테크와 디지털플랫폼 분야에서 괄목할만한 성과를 보이며 중국의 글로벌 4차 산업혁명을 선도하고 있다. 이에 본 연구는 평안보험그룹 인슈어테크와 플랫폼 비즈니스 활동을 ser-M 분석 모델을 통해 분석하여 국내 보험사들의 인공지능 기술기반 비즈니스 활성화를 위한 전략적 시사점을 제공하고자 했다. ser-M 분석 모델은 기업의 경영전략을 주체, 환경, 자원, 메커니즘 관점에서 통합적으로 해석이 가능한 프레임으로, 최고경영자의 비전과 리더십, 기업의 역사적 환경, 다양한 자원 활용, 독특한 메커니즘 관계가 통합적으로 해석되도록 연구하였다. 사례분석 결과, 평안보험은 안면·음성·표정 인식 등 핵심 인공지능 기술을 활용하여 세일즈, 보험인수, 보험금 청구, 대출 서비스 등 업무 전 영역을 디지털로 혁신함으로써 경비 절감과 고객서비스 발전을 이루었다. 또한 '중국 내 온라인 데이터'와 '회사가 축적한 방대한 오프라인 데이터 및 통찰력'을 인공지능, 빅데이터 분석 등 신기술과 결합하여 금융 서비스와 디지털 서비스 사업이 통합된 디지털 플랫폼을 구축하였다. 이러한 평안보험그룹의 성공 배경을 ser-M 관점에서 분석해 보면, 창업자 마밍즈 회장은 4차 산업혁명 시대의 디지털 기술발전, 시장경쟁 및 인구 구조의 변화를 빠르게 포착하여 새로운 비전을 수립하고 디지털 기술중시의 민첩한 리더십을 발휘하였다. 환경변화에 대응한 창업자 주도의 강력한 리더십을 바탕으로 인공지능 기술 투자, 우수 전문인력 확보, 빅데이터 역량 강화 등 내부자원을 혁신하고, 외부 흡수역량의 결합, 다양한 업종 간의 전략적 제휴를 통해 인슈어테크와 플랫폼 비즈니스를 성공적으로 끌어냈다. 이와 같은 성공사례 분석을 통하여 인슈어테크와 디지털플랫폼 도입을 본격 준비하고 있는 국내 보험사들에게 디지털 시대에 필요한 경영 전략과 리더십에 대한 시사점을 줄 수 있다.

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

관상동맥 우회술의 최근성적에 대한 임상적 고찰 (Clinical Analysis of the Recent Results of Coronary Artery Bypass Grafting)

  • 한성호;김혁;이철범;정원상;지행옥;강정호;김영학
    • Journal of Chest Surgery
    • /
    • 제35권7호
    • /
    • pp.523-529
    • /
    • 2002
  • 배경: 관상동맥 우회술은 수술경험이 축적됨에 따라 근래에 조기수술성적이 점차 향상됨이 보고되고 있다. 본 연구에서는 관상동맥 우회술을 시행 받은 환자들에서 후향적 분석을 통하여 최근의 수술성적을 알아보고자 하였다. 대상 및 방법: 1996년 1월부터 2001년 8월까지 한양대학병원에서 154명의 환자가 관상동맥 우회술을 시행받았다. 전체 환자를 1996년부터 1998년까지 시행 받은 47명(제1기)과 그 이후에 시행 받은 107명 (제2기)으로 나누어 입원 기록을 근거로 술전진단, 수술방법, 사망률과 합병증을 후향적으로 분석하였다. 결과: 성비는 제1기에 남자 35명, 여자 12명, 제2기에 남자 78명 여자 29명으로 비슷한 분포를 보였고 평균 연령은 제1기 $55.9{\pm}62$세에서 제2기 $61.0{\pm}8.0$세로 의미 있게 증가하였다(p<0.05). 평균 좌심실 구출률은 제1기에 $54.6{\pm}11.8$% 제2기에 $56.9{\pm}13.0$%였다. 수술 위험 인자의 분포 중 술전의 심근경색이 제1기에 13명 (27.7%), 제2기에 14명(13.1%)로 의미 있는 차이를 보였다(p<0.05). 수술은 전례에서 중등도 저체온의 체외순환 하에서 시행하였고, 심근 보호 방법으로는 제1기에는 심실세동 상태에서의 간헐적 대동맥 차단, 또는 결정질 냉심정지액이 주로 사용되었고 제2기에서는 냉혈 심정지액이 사용되었다. 체외순환시간은 제1기에서는 $149.2{\pm}48.7$분 제2기에서는 $113.1{\pm}30.6$분으로, 대동맥 차단시간은 제1기에서는 $81.3{\pm}26.5$분 제2기에서는 $72.2{\pm}23.9$분으로 각각 의미 있게 단축되었다(p<0.05). 내흉동맥의 사용율은 제1기에서는 42%(20/47), 제2기에서는 81%(87/107)로 증가하였으며 환자 1명당 문합수도 제1기 $2.5{\pm}0.6$개소에서 제2기 $3.0{\pm}1.1$개소로 의미 있게 증가 하였다(p<0.05). 대동맥내풍선 펌프는 제1기에 7명, 제2기에 17명에서 사용되었는데 술 전 사용율은 제1기에 28.6%(2/7) 제2기에 52.9%(9/17)로 증가하였고 좌심실 기능 부전(LVEF<40%), 또는 울혈성 심부전 소견이 있는 환자에서 광범위 하게 적용하였다. 수술 사망율은 제1기에 5명이 사망하여 10.6%(5/47)을 나타내었고 제2기에 1명이 사망하여 0.9%(1/107)로 의미 있게 감소하였다(p<0.05). 결론: 체외순환을 이용한 관상동맥 우회술은 근래에 더욱 안전하게 시행될 수 있으며 수술의 보편화와 수술 경험의 축적에 따른 체외순환 과대동맥 차단 시간의 단축, 심근 보호의 발달 그리고 좌심실 기능 부전이나 심부전이 있는 환자의 적절한 관리, 특히 대동맥내 풍선펌프의 광범위한 적용이 수술 사망률을 줄이는데 기여했을 것으로 사료된다.

일산화탄소 폐확산능검사에서 단회호흡법과 호흡내검사법의 비교 (Comparison of Single-Breath and Intra-Breath Method in Measuring Diffusing Capacity for Carbon Monoxide of the Lung)

  • 이재호;정희순;심영수
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권4호
    • /
    • pp.555-568
    • /
    • 1995
  • 연구배경: 폐확산능은 산소를 이용하여 측정하는 것이 가장 생리적이지만 폐모세혈의 산소분압측정이 어려워 임상에서는 일산화탄소를 이용하여 측정하고 있으며, 단회호흡(single-breath)폐확산능검사법이 가장 널리 사용되고있는 방법이다. 그러나 총폐용량까지 흡기한후 10초간 숨을 참는 과정을 기침, 호흡곤란 등이 있는 환자로선 수용하기 곤란하므로 이러한 과정없이 낮은 유량의 일회호기만을 필요로 히는 호흡내(intra-breath)폐확산능검사법이 고안되었다. 본 연구에서는 단회호흡법과 호흡내법으로 측정한 폐확산능간에 유의한 차이가 있는지 그리고 차이가 있다면 어떤 인자가 영향을 미치는지를 알아보고자 하였다. 방법: 특정질환과 무관하게 임의로 73명을 선택하고 유량-용적곡선 검사를 3회 시행한후 노력성 폐활량(FVC)과 1초간 노력성호기량($FEV_1$)의 합이 가장 큰 검사에서 노력성폐활량, 1초간 노력성호기량, 1초간 노력성호기량의 노력성 폐활량에 대한 비($FEV_1$/FVC)를 구했다. 폐확산능은 5분간격으로 각각 3회씩 단회호흡법과 호흡내법으로 측정하였으며, 선형적 상관분석으로 어떤 인자가 두 방법간의 폐확산능의 차[단회호흡법과 호흡내법에 의한 각각의 폐확산능의 차이의 평균치(mL/min/mmHg)]에 영향을 미치는지를 평가하여 다음과 같은 결과를 얻었다. 결과: 1) 단회호흡법 및 호흡내법 모두 검사내 재현성은 우수하였다. 2) 단회호흡법과 호흡내법으로 측정한 폐확산능간에는 전체적으로 유의한 상관관계가 있었지만, 두 방법의 측정치간에는 의미있는 치아가 있었다($1.01{\pm}0.35ml/min/mmHg$, p<0.01). 3) 단회호흡법과 호흡내법간의 폐확산능의 차이는 노력성폐활량과는 상관관계가 없었지만, 1초간 노력성호기량, $FEV_1$/FVC 및 환기배분의 지표인 메탄농도의 기울기와는 유의한 상관관계가 있었고 다중상관분석결과 $FEV_1$/FVC에 의한 영향이 가장 컸다(r=-0.4725, p<0.01). 4) 단회호흡법과 호흡내법간의 폐확산능의 차이와 $FEV_1$/FVC를 도식화하면 두 방법간의 폐확산능의 차이는 $FEV_1$/FVC가 50~60%인 구간에서 두 군으로 분리됨을 알수 있으며, $FEV_1$/FVC가 60% 이상에서는 두방법간에 유의한 차이가 없으나($0.05{\pm}0.24ml/min/mmHg$, p>0.1) 60% 미만에서는 유의한 차이가 있었다($-4.65{\pm}0.34ml/min/mmHg$, p<0.01). 5) 메탄농도의 기울기가 정상범위인 2%/L이내에선 단회호흡법과 호흡내법의 폐확산능이 모두 $24.3{\pm}0.68ml/min/mmHg$로 측정방법에 따른 차이가 없지만 2%/L를 초과한 경우에는 단회호흡법에 의한 폐확산능이 $15.0{\pm}0.44ml/min/mmHg$ 호흡내법에 선 $11.9{\pm}0.51ml/min/mmHg$로 두 방법간에 유의한 차이가 있었다(p<0.01). 따라서 $FEV_1$/FVC가 60% 미만일때는 호흡내법으로 측정한 폐확산능이 단회호흡법보다 의미있게 낮은 값을 보이는데, 그 이유는 주로 환기배분의 장애로 추정되지만 폐확산능 이 단회호흡법에서 과대평가되거나 폐확산능의 감소가 호흡내법에서 더 예민하게 나타 났을 가능정도 배제할수 없다. 결론: 73명을 대상으로 폐확산능을 단회호흡법과 호흡내법으로 측정해본 결과 호흡내법은 검사의 재현성도 우수하고 폐기능이 정상이거나 제한성 장애, 그리고 경도의 폐쇄성장애가 있는 경우에는 단회호흡법을 대체해서 사용할수 있지만, 중등도 이상의 폐쇄성장애가 있는 경우에는 단회호흡법보다 유의하게 낮은 검사치를 보였다. 호흡내법과 단회호흡법에 의한 폐확산능의 차이가 호흡내법이 단회호흡법에 비해 폐확산능의 감소를 예민하게 나타내주는 것인지 혹은 환기의 불균형에 의한 영향을 많이 받아서인지는 연구가 더 필요할 것이다.

  • PDF