• 소성∙가공
• /
• 제17권4호
• /
• pp.240-248
• /
• 2008

The effect of alloying elements(Mn, S, Mo, B) on the high temperature deformation behavior of Fe-29%Ni-17%Co (Kovar) alloy were investigated. And the effect of high temperature oxidation on the hot ductility was also studied. The hot ductility of Kovar alloy was drastically increased with the addition of Mn and lowering of S content. It has been found that the brittle intergranular fracture at high temperature cracking is closely associated with the FeS sulfide along the grain boundary. When Mn was added, the type of sulfide was changed to MnS from FeS and ductile intergranular fracture and transgranular fracture were promoted. The formation of oxide layer was found to have minimized the hot ductility of the Kovar alloy significantly. Grain boundary micro-cracks in the internal oxide region were noted following deformation due to high temperature, one of which acting as a notch that caused the poor hot workability of the oxidized specimen. The addition of Mo to the Kovar alloy could also retard the decrease in the hot ductility of the oxidized specimen through the prevention of notching due to internal oxidation. Hot ductility was remarkably improved by the addition of Boron. The improvement of hot ductility results from the grain boundary migration mainly due to the dynamic recrystallization at lower temperature range ($900{\sim}1000^{\circ}C$).

• 한국주조공학회지
• /
• 제27권5호
• /
• pp.203-208
• /
• 2007

The high temperature properties of vanadium and molybdenum added high silicon ductile iron, so called V-Mo-Si ductile iron, were investigated. The (V,Mo) complex carbides and Mo carbides precipitated at the cellular boundaries of the as-cast specimens. The microhardness of the (V,Mo) carbides were in the range of 553-619, while that of the Mo carbides in the range of 341-390. The thermo-mechanical tests were carried out with a Gleeble system at 700 and $800^{\circ}C$ under vacuum condition. The tensile strengths of the specimen tested at $700^{\circ}C$ with the dynamic deformation rate of 50 mm/sec and those with the static deformation rate of 0.15 mm/sec were 235.7 and 115.3 MPa, while the reduction in area were 23.7 and 22.4%, respectively. At the high dynamic deformation rates, the tensile strength was steeply increased due to promoting the brittle fracture of pearlite in the matrix of the specimens. But the changes of the reduction in area with the deformation rates on the same specimens were negligible. The weight gain of the V-Mo-Si specimens oxidized in the air atmosphere for 6 hours at 800 and $900^{\circ}C$ were 1.1 and 4.1.%, respectively. The cross-sectional microstructure of oxidized specimens consisted of the porous external scale layer grown outside from the original surface, the dense internal scale layer grown into the original surface, the decarburized ferrite layer between the internal scale and the matrix of base metal. The (V,Mo) carbides and Mo carbides formed in the matrix of as-cast specimen did not decompose during oxidation at 900 for 24 hours in air atmosphere.

• Tuberculosis and Respiratory Diseases
• /
• 제78권4호
• /
• pp.440-444
• /
• 2015

Gastric mucosal damage by iron pills is often reported. However, iron pill aspiration is uncommon. Oxidation of the impacted iron pill causes bronchial mucosal damage that progresses to chronic bronchial inflammation, necrosis, endobronchial stenosis and rarely, perforation. We reported a case of a 92-year-old woman with chronic productive cough and significant left-sided atelectasis. Bronchoscopy revealed substantial luminal narrowing with exudative inflammation of the left main bronchus. Bronchial washing cytology showed necroinflammatory exudate and a small amount of brown material. Mucosal biopsy showed diffuse brown pigments indicative of ferrous pigments, crystal deposition, and marked tissue degeneration. After vigorous coughing, she expectorated dark sediments and her symptoms and radiological abnormalities improved. There are a few such reports worldwide; however, this was the first case reported in Korea. Careful observation of aspiration-prone patients and early detection of iron pill aspiration may prevent iron pill-induced bronchial injury.

• 대한한방내과학회지
• /
• 제30권3호
• /
• pp.481-494
• /
• 2009

Background : Radix Sophora Flavescentis (SF) is used for the treatment of diabetes mellitus in Traditional Korean Medicine. However, little is known about the effects of Radix Sophora Flavescentis extract (SFE) on the hypoglycemic mechanism. Objective : We performed a series of experiments to verify the effects of SFE on the proliferation of RIN-m5F, the secretion and synthetic processes of insulin with glucose stimulation and inhibition of $\alpha$-glucosidase. Methods : Various amounts of SFE were added to the RIN-m5F cell culture to identify the effects on the cell proliferation, total amounts of insulin secretion, and related gene expression at the molecular level. Also to identify the inhibitory effect on the $\alpha$-glucosidase activities, ${\rho}NPG$ assay was done with various SFE concentrations followed by comparison with control. Results : SFE did not show considerable effects on RIN-m5F cells proliferation, insulin secretion or insulin mRNA expression, whichever phenomena did not depend on the glucose concentration. However, SFE significantly inhibited $\alpha$-glucosidase activity in a dose dependent manner compared to control. Conclusions : This study showed that SFE has potent $\alpha$-glucosidase inhibitory activity. Thus, SF may by used for the improvement of overall glycemic control. Further mechanism studies on the lipid toxicity and oxidation stress of SF seem to be necessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.731-734
• /
• 2009

KIER has been developed a compact and highly efficient fuel processor which is one of the key component of the residential PEM fuel cells system. The fuel processor uses methane steam reforming to convert natural gas to a mixture of water, hydrogen, carbon dioxide, carbon monoxide and unreacted methane. Then carbon monoxide is converted to carbon dioxide in water-gas-shift reactor and preferential oxidation reactor. A start-up time of the fuel processor is about 1h and CO concentration among the final product is maintained less than 5 vol. ppm. To achieve high thermal efficiency of 80% on a LHV basis, an optimal thermal network was designed. Internal heat exchange of the fuel processor is so efficient that the temperature of the reformed gas and the flue gas at the exit of the fuel processor remains less than $100^{\circ}C$. A compact design considering a mixing and distribution of the feed was applied to reduce the reactor volume. The current volume of the fuel processor is 17L with insulation.

• Biomolecules & Therapeutics
• /
• 제13권1호
• /
• pp.41-47
• /
• 2005

The study was conducted to determine whether oak wood vinegar extract influences blood alcohol concentration and hangover syndrome in healthy volunteers. 2% wood vinegar extract was effective to inhibit increase of blood alcohol concentration after alcohol intake and showed significantly different (P<0.1) compared to placebo. By result of questionnaire of volunteers, wood vinegar extract showed effects improving hangover syndrome. In comparative study about blood alcohol concentration and hangover syndrome of wood vinegar extract and other extract that hangover improvement effect was reported, average maximum blood alcohol concentration was lowered in those taking wood vinegar extract than those taking other extract. At drinking completion 210minutes (T210), blood alcohol concentration of those taking wood vinegar extract was the lowest by 0.063% compared with other extract but was not significantly different between in those taking wood vinegar extract and in those taking other extract. However, wood vinegar extract's experimental group was the highest by 0.462 in decrement rate of blood alcohol concentration and, when did P<0.1 by significance level, indicated difference that mean statistically compared to placebo group uniquely. At those taking wood vinegar extract, the improvement rate and the aggravation rate of hangover syndrome was each 87%, 2%. Thus it was concluded that wood vinegar extract showed excellent alcohol oxidation and was effective in hangover improvement.

• 한국연소학회지
• /
• 제18권4호
• /
• pp.12-20
• /
• 2013

The ignition delay time is an important factor to understand the combustion characteristics of internal combustion engine. In this study, ignition delay times of cool and thermal flame were observed separately in homogeneous charge compression ignition(HCCI) engine. This study presents numerical investigation of ignition delay time of n-heptane and alcohol(ethanol and n-butanol) binary fuel. The $O_2$ concentration in the mixture was set 9-10% to simulate high exhaust gas recirculation(EGR) rate condition. The numerical study on the ignition delay time was performed using CHEMKIN codes with various blending ratios and EGR rates. The results revealed that the ignition delay time increased with increasing the alcohol fraction in the mixture due to a decrease of oxidation of n-heptane at the low temperature. From the numerical analysis, ethanol needed more radical and higher temperature than n-butanol for oxidation. In addition, thermal ignition delay time is sharply increasing with decreasing $O_2$ fraction, but cool flame ignition delay time changes negligibly for both binary fuels. Also, in high temperature regime, the ignition delay time showed similar tendency with both blends regardless of blending ratio and EGR rate.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.61-69
• /
• 2012

Alloys of Fe-(5, 10, 15)Al and Fe-(10, 20, 30, 40)Cr were corroded at 700 and $800^{\circ}C$ for 70 hr in either atmospheric air or 1 atm of Ar+$1%SO_2$ gases. In these atmospheres, Fe-5Al and Fe-10Cr alloys displayed poor corrosion resistance. In atmospheric air, Fe-5Al alloys formed oxide nodules, while Fe-10Cr alloys formed thick scales and internal oxides. In Ar+$1%SO_2$ gases, Fe-5Al and Fe-10Cr alloys formed thick, nonadherent bi-layered scales, which grew primarily by the outward diffusion of Fe ions and inward diffusion of oxygen and sulfur ions. By contrast, in atmospheric air and Ar+$1%SO_2$ gases, Fe-(10, 15)Al and Fe-(20, 30, 40)Cr alloys displayed good corrosion resistance by forming $Al_2O_3$ and $Cr_2O_3$ layers on the surface, respectively.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.43-52
• /
• 2021

The Ni-based superalloy, Inconel 740, was corroded between 800 and 1100℃ for up to 100 hr in air and Ar-0.2%SO₂ gas in order to study its corrosion behavior in air and sulfur/oxygen environment. It displayed relatively good corrosion resistance in both environment, because its corrosion was primarily dominated by not sulfidation but oxidation especially in Ar-0.2%SO₂ gas. Such was attributed to the thermodynamic stability of oxides of alloying elements when compared to corresponding sulfides. The scales consisted primarily of Cr₂O₃, together with some NiAl₂O₄, MnCr₂O₄, NiCrMnO₄, and rutile-TiO₂. Sulfur from SO₂ gas made scales prone to spallation, and thicker. It also widened the internal corrosion zone when compared to air. The corrosion resistance of IN740 was mainly indebted to the formation of protective Cr₂O₃-rich oxides, and suppression of the sulfide formation.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.102-112
• /
• 2013

A very high-temperature gas reactor (VHTR) is one of the next generation nuclear reactors owing to its safety, high energy efficiency, and proliferation-resistance. Heat is transferred from the primary helium loop to the secondary helium loop through an intermediate heat exchanger (IHX). Under VHTR environment Alloy 617 is being considered a candidate Ni-based superalloy for the IHX of a VHTR, owing to its good creep resistance, phase stability and corrosion resistance at high temperature. In this study, high-temperature corrosion tests were carried out at 850 - $950^{\circ}C$ in air and impure helium environments. Alloy 617 specimens showed a parabolic oxidation behavior for all temperatures and environments. The activation energy for oxidation was 154 kJ/mol in helium environment, and 261 kJ/mol in an air environment. The scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDS) results revealed that there were a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbide after corrosion test. The thickness and depths of degraded layers also showed a parabolic relationship with the time. A corrosion rate of $950^{\circ}C$ in impure helium was higher than that in an air environment, caused by difference in the outer oxide morphology.