• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.201-208
• /
• 2022

Emulsion Liquid Membrane (ELM) is a prominent technique for the separation of heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of the components (Surfactant and Carrier) of ELM is a very significant step for its preparation. In the ELM technique, the primary water- in-oil (W/O) emulsion is emulsified in water to produce water-in-oil-in-water (W/O/W) emulsion. The water in oil emulsion was prepared by mixing the membrane phase and internal phase. To prepare the membrane phase, the extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2- ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II). Emulsion Liquid Membrane (ELM) is a well-known technique for separating heavy metal ions from wastewater due to the fast extraction and is a single-stage operation of stripping-extraction. The selection of ELM components (Surfactant and Carrier) is a very significant step in its preparation. In the ELM technique, the primary water-in-oil (W/O) emulsion is emulsified to produce water-in-oil-in-water (W/O/W) emulsion. The water in the oil emulsion was prepared by mixing the membrane and internal phases. The extractant D2EHPA (di-2-ethylhexylphosphoric acid) was used as a mobile carrier, Span-80 as a surfactant, and Paraffin as a diluent. Moreover, the internal (receiving) phase was prepared by dissolving sulphuric acid in water. Di-(2-ethylhexyl) phosphoric acid such as surfactant concentration, carrier concentration, sulphuric acid concentration in the receiving (internal) phase, agitation time (emulsion phase and feed phase), the volume ratio of the membrane phase to the receiving phase, the volume ratio of the external feed phase to the primary water-in-oil emulsion and pH of feed were studied on the percentage extraction of metal ions at 20℃. The results show that it is possible to remove 78% for As(V), 98% for Cd(II), and 99% for Pb(II).

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.5
• /
• pp.967-975
• /
• 2002

This study was to investigate the metal accumulation from Ohjeoksan-Decoction to rat brain(Sprague Dawley). 1. In Control group, each metal concentration was within 26.65mg/kg, and in each experimental groups, was within 28.39mg/kg. And, there were no significant metal concentration between control and experimental groups. Exceptionally, Cr and Ni level of control group was lower than experimental groups significantly. (p<0.05) and Cr and Ni level of experimental I group was lower than other experimental groups too.(p<0.05). But, Pb level of control group was higher than experimental groups significantly.(p<0.05) Pb level of experimental I group was higher than other experimental groups(p<0.01). 2. In non-hazardous, hazardous and total metal concentration, there was no increase tendency in brain according to the high dose of OD(Ohjeoksan-Decoction) intake. Reversely, in experimental groups, hazardous metal concentration was decrease by high OD intake.(p<0.05). 3. Correlation among each metal in brain was various in each groups. Briefly under the intake of Ohjeoksan-Decoction, that is very busy herb prescription, this study was defined within safety in brain metal level by P.O. during 10 days. But, there should be a more research about Pb increase by high dose OD intake

• Journal of Integrative Natural Science
• /
• v.4 no.2
• /
• pp.130-136
• /
• 2011

This study investigated the adsorption characteristics of nickel, zinc and cadmium ions from the aqueous solution onto the alginate bead. Adsorption equilibrium capacities of the heavy metal ions increased with increasing initial pH of the solution. The adsorption equilibrium isotherm of the heavy metal ions was well represented by Langmuir equation. The magnitude of adsorption capacity of the heavy metal ions onto alginate bead was the order of cadmium > zinc > nickel. Kinetic parameters were measured in a batch adsorber to analyze the adsorption rates of the heavy metal ions. The internal diffusion coefficient of the heavy metal ions in the intraparticle were determined by comparing the experimental concentration curves with those predicted from the surface diffusion model (SDM) and pore diffusion model (PDM). The internal diffusion of the heavy metal ions in the intraparticles was explained by PDM.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.3
• /
• pp.212-217
• /
• 2014

The electric power output characteristics of magnesium fuel cell were investigated with regard to internal resistance. A equivalent circuit with the series-connected three internal resistance was introduced to analyze of the response to change of power. The power output analysis was employed in order to investigate the effect of internal resistances for the electrolyte concentration, air electrode area, Mg electrode area and distance between the electrodes. It was confirmed that internal resistance is generated by the electrolyte, air electrode and metal electrode, then those Internal resistances had a significant effect on the power output decrease. The power output was a maximum when the load resistance maches the internal resistance of the magnesium fuel cell. The fuel efficiency was only 50% at maximum power output. Higher fuel efficiency was achieved when the load resistance is greater than the internal resistance.

• Clean Technology
• /
• v.6 no.1
• /
• pp.71-78
• /
• 2000

Removal rates of hydrogen sulfide were investigated to known effects of several light sources with external and internal irradiation on the desulfurization using C. thiosulfatophilum. In the case of internal illumination system, optical-fiber photobioreactor was applied to increase the light availability. Furthermore, sunlight was used as the main light energy in the daytime and metal-halide lamp was applied as an additional light energy at night. Light energy of 99% was saved by the application of the LED's array in comparison with the incandescent light source. $H_2S$ removal rates at 5,000 lux in a 4-L photobioreactor were shown as 0.040, 0.138, 0.136, and 0.134 (${\mu}mol$ $H_2S/min$)/(mg protein/L), respectively, in the following order of light sources, when several light sources such as fluorescent, energy-saving, incandescent, halogen lamp, and filtered light at 460 nm were applied. Removal rate per unit cell concentration with the internal light diffused optical-fibers increased about 1 six times as much as that with the external light sources. Removal rate per unit cell concentration, using sunlight in the daytime and a metal-halide lamp at night, was 0.41 less than 0.869 (${\mu}mol$ $H_2S/min$)/(mg protein/L) using a 400 W metal-halide lamp day and night, since the automatic sunlight collection system can transmit the light intensity as only 10% of that with a metal-halide lamp.

• Journal of Pharmacopuncture
• /
• v.10 no.1 s.22
• /
• pp.67-77
• /
• 2007

Objectives : Heavy metal contents in cultivated wild ginseng from Korea and China were evaluated for the safety purpose. Methods : Arsenic(As), cadmium(Cd), lead(Pb), mercury(Hg), copper(Cu), chromium(Cr), and selenium(Se) from the root, stem, and leaves of the Korean cultivated wild ginseng and the root of the Chinese cultivated wild ginseng were analyzed for the existence of heavy metal contents. Results : Most of heavy metals weren't detected in all the samples. Copper and lead were found in very minute volume and didn't reach the toxic concentration level of 10mg/kg. Samples used in the test were grown in non-contaminated areas, free from heavy metal contamination. Conclusions : Based on above results, cultivated wild ginseng from Korea and China are relatively safe from the heavy metal exposure. But for more rigorous quality control, an epidemiological survey using the samples from more diverse areas should be conducted.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.3
• /
• pp.270-276
• /
• 2010

This study estimated the heavy metal concentrations in octopus (Octopus minor) and conducted a food safety assessment of octopus. Octopus, a benthic cephalopod, was collected from the Seosan intertidal zone on the west coast of Korea. The samples were digested with acids, and then the cadmium (Cd), copper (Cu), and zinc (Zn) contents were analyzed using inductively coupled plasma mass spectrometry (ICP-MS). The Cd, Cu, and Zn range of concentrations in octopus were 0.06-19 (mean 5.8), 44-1,463 (mean 354.8), and 76-929 (mean 247.9) mg/kg on a dry weight basis, respectively. The concentrations of heavy metals were higher in the internal organs than in the mantle. Of the three heavy metals, copper had the highest concentrations in the internal organs because of the existence of hemocyanin bound with copper in octopus blood, whereas zinc had the highest concentrations in the mantle. No relationship between the concentration of heavy metals and biological parameters (length, weight, and sex) was found. The ratios (I/M) of the heavy metal concentrations in internal organs and mantle were highest for cadmium, although cadmium had much lower concentrations in the internal organs compared with copper and zinc. Considering the provisional tolerable weekly intake (PTWI) of the three heavy metals and the average intake of octopus per day, all three elements should have no adverse effects on humans.

• Journal of Surface Science and Engineering
• /
• v.43 no.5
• /
• pp.243-247
• /
• 2010

The micro Vickers hardness and internal stress of Ni-Fe metal thin film synthesized by electrodeposition method at $25^{\circ}C$ were studied as a function of bath composition, and surface microstructure and atomic compositions of thin films were investigated by SEM and EDS. And the shape change of $200\;{\AA}$ Ni-Fe nanowires made using anodic aluminum oxide(AAO) templates by electrodeposition method were observed by SEM as a function of ultrasonic treatment time and bath composition. The Fe deposition contents on the substrate non-linearly increased with Fe ion concentration over total metal ion concentration. In case of low Fe contents film, the grain size is smaller and denser than high Fe contents deposited films, and the micro Vickers hardness increased with Fe contents of electrodeposited films. These results affected the shape change of nanowire after ultrasonic treatments.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.483-491
• /
• 2007

A closed form solution of a composite mechanics system is performed for the investigation of elastic-plastic behavior in order to predict fiber stresses, fiber/matrix interfacial shear stresses, and matrix yielding behavior in short fiber reinforced metal matrix composites. The model is based on a theoretical development that considers the stress concentration between fiber ends and the propagation of matrix plasticity and is compared with the results of a conventional shear lag model as well as a modified shear lag model. For the region of matrix plasticity, slip mechanisms between the fiber and matrix which normally occur at the interface are taken into account for the derivation. Results of predicted stresses for the small-scale yielding as well as the large-scale yielding in the matrix are compared with other theories. The effects of fiber aspect ratio are also evaluated for the internal elastic-plastic stress field. It is found that the incorporation of strong fibers results in substantial improvements in composite strength relative to the fiber/matrix interfacial shear stresses, but can produce earlier matrix yielding because of intensified stress concentration effects. It is also found that the present model can be applied to investigate the stress transfer mechanism between the elastic fiber and the elastic-plastic matrix, such as in short fiber reinforced metal matrix composites.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.2
• /
• pp.98-103
• /
• 2011

[ $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ ]cathode material for lithium secondary battery is obtained using co-precipitation method. To determine the optimal metal solution concentration value, the CSTR coprecipitation was carried out at various concentration values(1-2 mol/L). The surface morphology of coated samples was characterization by SEM(scanning electron microscope) and XRD (X-Ray Diffraction)analyses. Impedance analysis and cyclic voltammogram presented that internal resistance of the cell was dependent upon the concentration of metal solution. such data is very helpful in determining the optimal content of metal solution concentration to enhancing electrochemical property by adjusting powder size distribution and crystal structure.