• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.865-869
• /
• 2008

Effects of chitosan coating on respiration rate and internal gas composition of 'Fuji' apple and 'Satsuma' mandarin were investigated and compared to wax emulsions and two commercial coating materials. Chitosan coating reduced respiration rate significantly (p<0.05) in 'Fuji' apple and 'Satsuma' mandarin compared to uncoated and other coating materials. Chitosan coating on 'Fuji' apple showed the highest $CO_2$ and the lowest $O_2$ concentration in the internal gas composition at $5^{\circ}C$ but showed no differences compared to other coating materials at $20^{\circ}C$. 'Satsuma' mandarin showed significantly high $CO_2$ concentration in chitosan coating at $20^{\circ}C$ but there were not significant differences among coating materials in $CO_2$ and $O_2$ composition at $5^{\circ}C$.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.36-41
• /
• 2006

A simplified model of plastic layer and internal gas pressure In a coke oven is presented. We calculate internal gas pressure using presented model. And results are compared with calculated results using experimental data. Results show the difference of internal gas pressure by coal composition. The model is used to show that the permeability at the resolidification end of the plastic layer is a key determinant of the magnitude of the internal gas pressure.

• 한국미생물·생명공학회지
• /
• 제1권1호
• /
• pp.25-30
• /
• 1973

본 연구는 1971년과 1972년 9월 25일에 수확한 흥옥과 동년 10월 25일에 수확한 국광을 시료로하여 이들 사과의 저장에 있어서 환경압력 및 환경기체조성이 사과조직내 기체조성과 호흡 및 ethylene 생성에 미치는 영향을 규명하기 위하여 실험하였던 바 그 결과는 다음과 같다. 1. 과실조직내 기체량은 환경압력에 비례적으로 변화하며, 환경압력이 사과의 조직내 기체조성 및 기체량에 현저하게 영향을 미쳤다. 2. 조직내 $CO_2$발생량의 증가는 조직내 $O_2$ 소비량에 관련되며, 그러므로 내부 $O_2$ 소비의 감소되는 시기와 호흡에 있어서 climacteric rise의 시기와 일치하였다. 3. $CO_2$ 발생량의 증가는 ethylene 생성 후에 나타나며 그리고 상압구의 이와 같은 현상은 감압구에 잇달아 일어난다. 4. 감압저장에 있어서도 저산소농도와 고탄산가스농도의 조절로써 CA효과를 얻을 수 있다.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Wastes such as shredder dust of disposed vehicles can be decomposed into low calorific flammable gases by Pyrolysis gasification. A stationary electric Power generation using an internal combustion engine fuelled with the waste-pyrolysis gas is an effective way to ease both waste management and energy saving issues. The waste-pyrolysis gas mainly consists of H$_2$, CO, $CO_2$ and $N_2$. The composition and heating value of the gas generated depend on the conversion process and the property of the initial waste. This research analyzed the characteristics of the combustion and the exhaust emissions in a premixed charge spark ignition engine fuelled with several kinds of model gases, which were selected to simulate the pyrolysis-gases of automobile shredder dusts. The influences of the heating value and composition of the fuel were analyzed parametrically. Furthermore, optical analyses of the combustion flame were made to study the influence of the fuel's inert gas on the flame propagation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.223-229
• /
• 2002

Spark plug ionization signal could be useful in an internal combustion engine as a feedback signal for combustion diagnostics such as misfire detection, knocking detection and lambda control, but the signal has high level of cyclic fluctuation in an internal combustion engine due to residual gas, pressure, temperature, mixture composition in the spark gap. Because of this reason it is very difficult to apply ion signal to commercial engine control. In this Study, a correlation between A/F and spark plug ionization signal was studied in a constant volume chamber. Constant volume chamber with gas phase fuel(Propane) has homogeneous fuel composition , no mixture flow, same pressure and temperature on each test. The results show that mean chemi-ion signal has the highest correlation with A/F and intial pressure change has on effect on the thermal-ion signal and not on chemi-ion signal.

• 열처리공학회지
• /
• 제4권4호
• /
• pp.53-60
• /
• 1991

This study has been performed to investigate into the internal oxidation characteristics of low carbon steel with respect to the added amount of air in nitrogen-propane atmosphere after gas carburizing for various times at $930^{\circ}C$. The results obtained from the experiment are as follows ; (1) Optical micrographs have shown that the internal oxidation is unlikely to occur in the gas atmosphere without air and that oxidized zone in the outer surface layer is formed in the gas atmosphere with air revealing that the depth of oxidized zone increases with increasing the added amount of air. (2) The formation of internally oxidized zone in the outer surface layer has been found to be inhibited as Ni content increases, i. e, the amount of alloying element increases. (3) The depth of oxidation has been measured to increase with almost parabolically gas carburizing time of up to 6 hours.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.363-371
• /
• 2022

In this study, the operation characteristics of the internal reforming type molten carbonate fuel cell (MCFC) were studied using computational fluid dynamics (CFD) analysis according to the steam to carbon ratio (S/C ratio), operating temperature, and gas utilization. From the simulation results, the distribution of gas composition due to the electrochemical reaction and the reforming reaction was predicted. The internal reforming type showed a lower temperature difference than the external reforming type MCFC. As the operating temperature decreased, less hydrogen was produced and the performance of the fuel cell also decreased. As the gas utilization rate decreased, more gas was injected into the same reaction area, and thus the performance of the fuel cell increased.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.27-32
• /
• 2013

바이오가스, 매립가스와 같은 신재생 가스 연료는 Biomass, 유기성 폐기물 등으로부터 얻을 수 있기 때문에 대기 중의 이산화탄소를 증가시키지 않고 재순환시키는 탄소중립적인 특성이 있어 지구온난화에 대응할 수 있는 장점이 있다. 따라서 다량의 불활성가스로 인한 저발열량, 원료 및 공정에 따른 연료조성 변화 등의 단점에도 불구하고 이를 엔진에 적용하여 에너지를 생산하고자 하는 노력이 계속되어왔다. 이중에서도 연료조성의 변화는 엔진 성능에 큰 영향을 미칠 수 있기 때문에 이에 대한 연구가 필요한 실정이다. 따라서 이번 연구에서는 신재생가스연료에 포함된 불활성가스의 양을 변화시켜 연료 조성 변화를 모사하고 이를 엔진의 연료로 사용함으로써 연료 조성의 변화가 엔진 성능 및 배기배출 특성에 주는 영향을 파악하였다. 또한 엔진 효율 및 배기 성능을 향상시키기 위한 방안에 하나로 보다 긴 전극을 갖는 스파크 플러그를 적용하였으며 그 결과를 기존의 Base 스파크 플러그 시험 결과와 비교하였다.

• 열처리공학회지
• /
• 제14권1호
• /
• pp.8-16
• /
• 2001

The effects of gas composition, pressure, temperature and time on the case thickness, hardness and nitride formation in the surface of tool steels(STD11 and STD61) have been studied by micro-pulse plasma nitriding. External compound layer and internal diffusion layer and the diffusion layer were observed in the nitrided case of tool steels. The relative amounts and kind of phases formed in the nitrided case changed with the change of nitriding conditions. Generally, only nitride phases such as ${\gamma}(Fe_4N)$, ${\varepsilon}(Fe_{2-3}N)$, or $Cr_{1.75}V_{0.25}N_2$ phases were detected in the compound layer, while nitride and carbide phases such as ${\varepsilon}-nitride(Fe_{2-3}N)$, $(Cr,Fe)_{\gamma}C_3$ or $Fe_3C$ were detected in the diffusion layer by XRD analysis. The thickness of compound layer increased with the increase of nitrogen content in the gas composition. Maximum case depth was obtained at gas pressure of 200Pa.

• 대한화학회지
• /
• 제57권3호
• /
• pp.365-369
• /
• 2013

With the wide application of ASP (alkaline-surfactant-polymer) flooding, the scaling becomes more and more serious, which is harmful to the oilfield and environment. In order to investigate the effects of HPAM on calcium carbonate crystallization, the crystallization behaviors of $CaCO_3$ in HPAM (Hydrolyzed polyacrylamide) solutions were studied and the composition and morphology of $CaCO_3$ crystal were investigated in different concentrations of polyacrylamide solutions. The crystal forms and morphologies of $CaCO_3$ were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. The results show that the crystallization of $CaCO_3$ is strongly influenced by the HPAM. The paper analyzed the internal cause, and the results show: The reasons leading to the change of morphology are carboxyl groups in polyacrylamide molecule and $Ca^{2+}$ in solution form chelates by coordination bond. And the chelates are adsorbed on the calcium hydroxide surfaces of solid-liquid interfaces so as to change the formation rate of calcium carbonate crystal nucleus. The research provides a reliable basis for the mechanism research of the scaling problem in the oil extraction process of ASP flooding and the adoption of scale inhibition and scale inhibitor.