• Journal of Electrochemical Science and Technology
• /
• v.15 no.3
• /
• pp.365-372
• /
• 2024

As the energy density of lithium-ion batteries (LIBs) continues to increase, various separators are being developed to with the aim of improving the safety performance. Although poly(imide) (PI)-based separators are widely used, it is difficult to control their pore size and distribution, and this may further increase the risk associated. Herein, a melamine phosphonic acid (MP)-coated PI separator that can effectively control the pore structure of the substrate is suggested as a remedy. After the MP material is embedded into the PI separator with a simple one-step casting process, it effectively clogs the large pores of the PI separator, preventing the occurrence of internal short circuits during charging. It is anticipated that the MP material can also suppress rapid thermal runaway upon cycling due to its ability to reduce the internal temperature of the LIB cell caused by the desirable endothermic behavior around 300℃. According to experiments, the MP-coated PI separator not only decreases the thermal shrinkage rate better than commercial poly(ethylene) (PE) separators but also exhibits a desirable Gurley number (109.6 s/100 cc) and electrolyte uptake rate (240%), which is unique. The proposed separator is electrochemically stable in the range 0.0-5.0 V (vs. Li/Li⁺), which is the typical working potential of conventional electrode materials. In practice, the MP-coated PI separator exhibits stable cycling performance in a graphite-LiNi_0.83Co_0.10Mn_0.07O₂ full cell without an internal short circuit (retention: 90.3%).

• The Journal of Internal Korean Medicine
• /
• v.27 no.1
• /
• pp.276-287
• /
• 2006

Background & Objective : The herbal medicine Sojukgunbihwan granule has been used for the treatment of functional dyspepsia, generally categorized as a gastric dysmotility disease. However, its mechanisms are not yet well known. Therefore, the effects of Sojukgunbihwan granules on gastric motility in rats was investigated. Methods : The myoelectrical activity of the gastric smooth muscle was recorded by a bipolar electrode placed at the gastric antrum of rats. The contractile waves were measured for 30 minutes before and after intragastric administration of each solution(normal saline, Pyungwisan 40mg/kg, Sojukgunbihwan granules 60mg/kg) and expressed as the motility index. Gastric emptying was measured by the number of glass beads expelled from the stomach(containing one hundred 1mm glass beads) within an hour after glass beads and test drugs(normal saline, Pyungwisan 40mg/kg, Pyungwisan 120mg/kg, Sojukgunbihwan granules 60mg/kg, Sojukgunbihwan granules 180mg/kg) were administered. In another series of experiments to evaluate the mechanisms of Sojukgunbihwan granules under delayed conditions, the rats were treated with atropine sulfate(1 mg/kg, s.c.), cisplatin(10mg/kg, i.p.), and NAME($N^G$-nitro-L-arginine methyl ester, 75mg/kg, s.c.) respectively. Results : Intragastric administration of Sojukgunbihwan granules increased the myoelectrical activity significantly, gastric motility index rose 25%, and gastric emptying of glass beads was significantly enhanced over a period of 60minutes. Under the delayed gastric emptying induced by atropine sulfate, cisplatin, and NAME, Sojukgunbihwan granules aggravated gastric emptying in the atropine sulfate($5.71{\pm}3.45\;vs\;3.71{\pm}4.42$) and cisplatin($13.86{\pm}3.53\;vs\;5.14{\pm}5.05$, p<0.01) treated groups, but enhanced gastric emptying in the NAME treated group($5.00{\pm}3.21\;vs\;11.71{\pm}5.65$, p<0.05). Conclusions : Results suggest that Sojukgunbihwan granules stimulate gastric motility through cholinergic and 5-hydroxytryptamine 3 receptors. Results are indicative of Sojukgunbihwan as an especially effective remedy in dysmotility-like functional dyspepsia with impaired reservoir functions such as gastric adaptive relaxation.

• The Journal of Internal Korean Medicine
• /
• v.33 no.1
• /
• pp.14-25
• /
• 2012

Objectives : To observe physiological changes during clinical acupuncture treatment. Methods : We recruited 40 healthy volunteers who had experienced an acupuncture treatment at least once within the past three years. The experimental group was divided into four groups according to the needling site and frequency of electrical stimulation. Sites consisted of abdomen and legs. Frequencies consisted of 100 Hz and 2 Hz. The procedures of experimental treatment consisted of seven phases, Resting I phase (Resting I), Needle insertion phase (Insertion), Maintenance of needle insertion I phase (Maintain I), Electrical stimulation phase (ES), Maintenance of needle insertion II phase (Maintain II), Needle removal phase (Removal) and Resting II phase (Resting II). We measured the surface electromygraphy (SEMG) through an electrode on the frontalis muscle during all phases consecutively. Results : When SEMGs of all seven phases were analyzed, they significantly increased or decreased according to phases. SEMGs of Insertion, Maintain I, ES and Maintain II phase significantly increased more than RestingI in abdomen and legs groups. SEMGs of the abdomen group were measured as being $4.78{\pm}0.74{\mu}V$ on Resting I, $16.48{\pm}3.97{\mu}V$ on Insertion, $46.31{\pm}10.56{\mu}V$ on Maintain I, $45.88{\pm}9.72{\mu}V$ on ES, $45.56{\pm}9.69{\mu}V$ on Maintain II, $18.76{\pm}3.05{\mu}V$ on Removal, and $3.75{\pm}0.65{\mu}V$ on Resting II. SEMGs of the legs group were measured as being $3.34{\pm}0.35{\mu}V$ on Resting I, $12.11{\pm}1.76{\mu}V$ on Insertion, $36.74{\pm}6.99{\mu}V$ on Maintain I, $33.57{\pm}6.30{\mu}V$ on ES, $32.66{\pm}6.03{\mu}V$ on Maintain II, $14.08{\pm}2.15{\mu}V$ on Removal, and $2.88{\pm}0.32{\mu}V$ on Resting II. Conclusions : SEMG changed differently according to processes of acupuncture. Electrical stimulation showed different change of SEMG. Thus, acupuncture treatment may change the status of the autonomic nervous system.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.233-234
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.78-85
• /
• 1996

This paper experience the mechanism for the electret of polyethyleneterephthalate(PET) by using surface potentail measurement means. We investigated the internal charge production and becoming week by evaporating electrode in sample structure of electret coexist with hetero charge and homo charge, as the study based on two charge theory. We expects that the hetero charge consists of the dipole and ion displacement of internality, the homo charge consists of injected charge of externality.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.953-955
• /
• 1998

In this paper, a double cylindrical type ozonizer has been designed and manufactured to improve ozone yield by cooling external electrode. The ozonizer equipped with three electrodes( central, internal and external electrodes ) and two gaps. Discharge and ozone characteristics are described in this paper by varying flux( Q ) of oxygen supplied gas, temperature of cooling gas and supplied voltage.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.168-172
• /
• 2008

A microbial fuel cell is a noble green technology generating electricity from biomass and is expected to find applications in a real world. One of main hurdles to this purpose is the low power density. In this study, we constructed a prototype microbial fuel cell using Proteus vulgaris to study the effect of various reaction conditions on the performance. Main focus has been made on the modification of the anode with electropolymerized polypyrrole (Ppy). A dramatic power enhancement was resulted from the Ppy deposition onto the reticulated vitreous carbon (RVC) electrode. Our obtained maximum power density of 1.2 mW cm-3 is the highest value among the reported ones for the similar system. Further power enhancement was possible by increasing the ionic strength of the solution to decrease internal resistance of the cell. Other variables such as the deposition time, kinds of mediators, and amount of bacteria have also been examined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.950-952
• /
• 2003

This paper have been studied fabrication and characteristics of disposable pH sensor using MEMS technology. The sensor has two open-well structure, the container for the internal electrolyte and electrode were formed by anisotropically etching a silicon substrate. unlike currently used KCI saturated solution, the structure was introduced hydrogel which take an advantage of miniaturization, bulk product, a low price. PU and CA/TP used to measurement ion detection, one is reference membrane and the other is pH. fabricated sensor is encapsulated entirely with epoxy, finally sensor was estimated various ion sorts and pH ranges.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.6-9
• /
• 2005

Aging characteristics of 0.2PMN-0.8PZT multilayer ceramic actuators (MCA) has been investigated by applying both triangular wave function for unpoled and unipolar wave for poling. P-E hysteresis loops of the MCA had been distorted after about 90 million cycles running in triangular wave function. Effective electromechanical coupling coefficient was calculated in resonant and anti resonant frequencies. And pseudo-piezoelectric constant $d_{33}$ was also estimated from the strain versus electric field characteristics. The crack growth of MCA was clearly observed along to the boundary between electrode and inactive area. That results were thought due to the internal tensile stress came from both actuation of $d_{33}$ mode and motion of Poisson ratio.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2307-2308
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.