• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.71-86
• /
• 2023

Rock blasting tests using underground penetration-type displacement sensors were conducted, and three-dimensional finite element numerical analyses were performed to assess their applicability and mitigate slope hazards during rock blasting. Additionally, parameters influencing vibration velocity were investigated during the tests. The results confirmed that underground penetration-type displacement sensors are suitable for monitoring rock slope behavior, and the numerical analyses revealed that the most influential parameter on vibration velocity during rock blasting is the unit weight. Furthermore, it was observed that vibration velocity decreases significantly with distance from the blast source, and proximity to the source leads to substantial variations in vibration velocity due to differences in elastic modulus and unit weight. Changes in internal friction angle and adhesive strength had minimal impact.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.305-312
• /
• 2018

This study is about the development of a non-sintered binder (NSB) which does not require a sintering process by using the industrial by-products Phosphogypsum (PG), Waste Lime (WL) and Granulated Blast Furnace Slag (GBFS). In this report, through SEM analysis of the NSB paste hardening body, micropore analysis of paste using the mercury press-in method and microstructure observation were executed to consider the influence of the formation of the pore structure and the distribution of pore volume on strength, and the following conclusions were reached. 1) Pore structure of NSB paste of early age is influenced by hydrate generation amount by GBFS and activator. 2) Through observing the internal microstructure of NSB binder paste, it was found that the strength expression at early age due to hydration reaction was achieved with a large amount of ettringite serving as the frame with C-S-H gel generated at the same time. It was confirmed that C-S-H gel wrapped around ettringite, and as time passed, the amount generated continually increased, and C-S-H gel tightly filled the pores of hardened paste, forming a dense network-type web structure. 3) For NSB-type cement, the degree of formation of gel pores below $10{\mu}m$ had a greater influence on strength improvement than simple pore reduction by charging capillary pores, and the pore size that had the greatest effect on strength was micropores with diameter below $10{\mu}m$.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.122-126
• /
• 2016

In June 2015, an exhibited typical signs and symptoms of brown rot was observed on fruit of Apricot cvs. Modern and Alexander at an incidence of 5% of fruit in Jeonju, Korea. Early symptoms on fruit showed small, circular, light brown spots that eventually destroyed the entire fruit. Small sporodochia appeared on the fruit surface. Fruit susceptibility to brown rot increases during the 1 to 2 weeks period prior to harvest. The conidia were one-celled, hyaline, lemon-shaped, $14.6-18.0{\times}8.5-11{\mu}m$, and borne in branched monilioid chains. Based on the morphological characteristics and phylogenetic analysis of internal transcribed spacer (ITS), the fungus was identified as Monilinia fructicola. A BLAST search revealed that sequences of the fungus shared 100% identity to those of M. fructicola. Pathogenicity of a representative isolate was proved by artificial inoculation, fulfilling Koch's postulates. To our knowledge, this is the first confirmed report on the occurrence of M. fructicola on apricot in Korea.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.15-21
• /
• 2015

Recently, attempts of replacing some of natural aggregate with mix of low quality aggregate are carried out for stable supply of aggregate. However, low quality aggregate such as recycled aggregate produced during the disposal process of construction wastes and by-product aggregate produced by industrial activities has problem of failing to comply to KS Standards. Therefore, we have compared fundamental properties of concrete by using granite crushed aggregate, recycled aggregate, blast furnace and electric arc furnace slag aggregate for effective utilization of lacking aggregate resources. As the result, slump in case of mixed use of aggregate was increased 0~10% compared to single use. Therefore, it is judged to be economically advantageous as it can expect effects in unit quantity or reduction of SP agent. Compressive strength in case of mixed use of aggregate was increased 0~10% compared to single use as it filled internal crevice of concrete with continuous particle size distribution. Accordingly, if we utilize by satisfying standard particle scope through mix of aggregate with different cause of formation in proper ratio, it was possible to confirm utility of mixed aggregate with demonstration of effects of increases of fluidity and compressive strength of concrete.

• The Korean Journal of Mycology
• /
• v.41 no.1
• /
• pp.47-51
• /
• 2013

Yeasts isolated from wild flowers of Gyejoksan in Daejeon city, Oseosan in Chungchungnamdo, and Baekamsan in Jeollabukdo, Korea were identified by comparison of nucleotide sequences for PCR-amplified D1/D2 region of 26S rDNA or internal transcribed spacer (ITS) 1 and 2 including 5.8S rDNA using BLAST. Twelve yeast strains of ten species and seventeen yeast strains of ten species were isolated from wild flowers of Gyejoksan and Oseosan, respectively. And thirty seven yeast strains of twenty four species were isolated from wild flowers of Baekamsan. Total thirty four yeast species were isolated from three different sample collection areas, but only nine species were overlapped from the at least two different sampling areas: Cryptococcus sp., Cryptococcus aureus, Cryptococcus flavescens, Cryptococcus flavus, Metschnikowia sp., Pseudozyma aphidis, Rhodotorula glutinis, Sporobolomyces carnicolor, and Sporobolomyces ruberrimus. Among them only Cryptococcus aureus was occurred from all three different collection sites. Other twenty five species were restricted to specific collection site suggesting that each area has distinctive yeast flora.

• The Korean Journal of Mycology
• /
• v.48 no.1
• /
• pp.39-45
• /
• 2020

A fungal isolate US-18-11 was isolated from the soil in Uiseong, Korea. The mycelium growth measured after 7 days of incubation at 22℃ on malt extract agar (MEA) and oatmeal agar (OA) media was 42-43 mm and 41-44 mm in diameter, respectively. The fungal colony formed white to dull green aerial mycelia that were floccose with regular margins and olivaceous black with leaden gray patches on the reverse side. The conidia were hyaline to brown in color, ellipsoidal to ovoid, guttulate, abundant, globose, solitary, or confluent measuring 3.2-7.2×1.1-2.3 ㎛. A BLAST search of the large subunit (LSU), internal transcribed spacer (ITS) region, second largest subunit of DNA-directed RNA polymerase II (RPB2) and β-tubulin (TUB2) gene sequences revealed that the isolate US-18-11 has similarities of 99, 100, 97, and 99% with those of Epicoccum draconis CBS 186.83, respectively. A neighbor-joining phylogenetic tree constructed based on the concatenated dataset of above-mentioned sequences showed that isolate US-18-11 clustered with Epicoccum draconis CBS 186.83 in the same clade. Based on the results of morphological, cultural, and phylogenetic analysis, the isolate US-18-11 was identical to the previously described E. draconis CBS 186.83. To our knowledge, this is the first report of E. draconis in Korea.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.65-76
• /
• 2006

Scz1, an isolate of Sclerotinia homoeocarpa, was recently reported as a novel pathogen responsible for dollar spot disease in Zoysiagrass, a warm season turfgrass. Scz1 possessed different characteristics on mycelial pigment, mycelial affinity and host pathogenecity compared to those of Scb1, a typical isolate, obtained from creeping bentgrass, a cool season turfgrass. In this study, only three isolates, Scz1, Scz2(another analogous isolate of Sclerotinia homoeocarpa from zoysiagrass), and Scb1, were examined at the molecular level using the internal transcribed spacer(ITS) and random amplified polymorphic DNA(RAPD) assays to verify their identification and genetic variation. As a result of ITS assay, partial ITS sequences of three isolates showed 94-97% similarity with a standardized ITS sequence of S. homoeocarpa registered on BLAST. In the analysis of RAPD, range value through similarity matrix was 0.167 between Scz1 and Scb1, 0.139 between Scz2 and Scb1, and 0.713 between Scz1 and Scz2, respectively. Furthermore, tendegram analysis indicated that Scz1 and Scz2, unlike Scb1, were clustered together as accompanying a high genetic similarity. In in vitro fungicide bioassay, $EC_{50}$ value representing the sensitivity degree to propiconazole, a well-known fungicide for dollar spot disease, was 0.012 ${\mu}g/ml$ for Sczl, 0.003 ${\mu}g/ml$ for Scz2, and 0.030 ${\mu}g/ml$ for Scb1. From all data taken, we concluded that both Scz1 and Scz2 belonged to one group of S. homoeocarpa, since they exhibit the same host range and high level of genetic similarity, whereas their chemical competences to a fungicide were different. This study would provide further approach for assessing genetic diversity of S. homoeocarpa isolates as well as characterizing individual isolate against chemical exposure.

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.151-157
• /
• 1999

Purpose : By sequencing the Erpressed Sequence Tags of human 걸ermal papilla CDNA library, we identified a clone named K872 of which the expression decreased during differentiation of HL6O cell line. Materials and Methods : K872 plasmid DNA was isolated according to QIA plasmid extraction kit (Qiagen GmbH, Germany). The nucleotide sequencing was performed by Sanger's method with K872 plasmid DNA. The most updated GenBank EMBL necleic acid banks were searched through the internet by using BLAST (Basic Local Alignment Search Tools) program. Nothern bots were performed using RNA isolated from various human tissues and cancer cell lines. The gene expression of the fusion protein was achieved by His-Patch Thiofusicn expression system and the protein product was identified on SDS-PAGE. Results : K872 clone is 1006 nucleotides long, and has a coding region of 675 nucleotides and a 3' non-coding region of 280 nucleotides. The presumed open reading frame starting at the 5' terminus of K872 encodes 226 amino acids, including the initiation methionine residue. The amino acid sequence deduced from the open reading frame of K872 shares $70\%$, identity with that of rat glutathione 5-transferase kappa 1 (rGSTKl). The transcripts were expressed in a variety of human tissues and cancer cells. The levels of transcript were relatively high in those tissues such as heart, skeletal muscle, and peripheral blood leukocyte. It is noteworthy that K872 was found to be abundantly expressed in coloreetal cancer and melanoma cell lines. Conclusion : Homology search result suggests that K872 clone is the human homolog of the rGSTK1 which is known to be involved in the resistance of cytotoxic therapy. We propose that meticulous functional analysis should be followed to confirm that.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.571-578
• /
• 2016

Recently, review on viability of various industrial by product and natural materials as raw material for concrete has been actively done in aspect of environment-friendly issue and depletion of natural resource. This study conducted fundamental study on the possibility of utilizing mud flat as admixture and filling material for concrete. First, chemical analysis on the viability of mud flat as admixture was done and the researchers compared it with the substance of fly ash and blast furnace slag. According to the result, substance content was proven to be inadequate. In addition, as the replacement rate of mud flat increased, compressive strength and tensile strength decreased. According to the estimated result of chemical substance analysis, possibility of utilizing mud flat as admixture was low. According to the result of experiment done as filling material, 10% ~ 30% replacement rate of mud flat manifested more than 8 Mpa of compressive strength of block which may be utilized for secondary product. However, additional experiment such as making block is required afterward. According to the result of flow experiment, as the replacement rate of mud flat increased, flow value decreased, and through chloride content analysis test, it was proven that mud flat is inappropriate to be applied as steel beam using structure since it has high content of sodium. It may be utilized as products that does not use steel beam such as internal brick.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.229-236
• /
• 2020

Sixty-five molds isolated from clinical specimens were included in this study. All the isolates were molds that could be identified morphologically, strains that are difficult to identify because of morphological similarities, and strains that require species-level identification. PCR and direct sequencing were performed to target the internal transcribed spacer (ITS) region, the D1/D2 region, and the β-tubulin gene. Comparative sequence analysis using the GenBank database was performed using the basic local alignment search tool (BLAST) algorithm. The fungi identified morphologically to the genus level were 67%. Sequencing analysis was performed on 62 genera and species level of the 65 strains. Discrepancies were 14 (21.5%) of the 65 strains between the results of phenotypic and molecular identification. B. dermatitidis, T. marneffei, and G. argillacea were identified for the first time in Korea using the DNA sequencing method. Morphological identification is a very useful method in terms of the reporting time and costs in cases of frequently isolated and rapid growth, such as Aspergillus. When molecular methods are employed, the cost and clinical significance should be considered. On the other hand, the molecular identification of molds can provide fast and accurate results.