• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.63-72
• /
• 2017

This study fabricated a low-voltage 10 circuit distribution board based on the KEMC (Korea Electrical Manufacturers Cooperative) 2102-610 standard and performed a characteristics assessment of the developed 10 circuit distribution board to secure product stability. The developed 10 circuit distribution board is designed to have the characteristics of insulation materials, as well as resistance to corrosion ultraviolet radiation and mechanical impact. The developed distribution board is fabricated to have an appropriate protection class of enclosure, electric shock prevention and protection circuits, switchgear and its components, internal electrical circuits and connectors, external conduct terminal, insulation characteristics, temperature rise test, heat resistance, etc. The developed 10 circuit distribution board consists of a single phase circuit and 3-phase circuits. It is possible to measure in real time the leakage current generated from the load distribution line by installing a sensor module at the load side of each of the branched switchgears. In addition, it is possible to increase a circuit according to the use and purpose of the load and to also manage and check the load in real time. Temperature rise tests were performed on the developed 10 circuit distribution board at 18 places including the inlet connection, main circuit and distribution circuit bus bars and bus bar supports, etc. The highest temperature of $65.3^{\circ}C$ was measured at the R-Phase of the connection of the MCCB power supply for the branch circuit bus bar and a temperature rise of $61.6^{\circ}C$ was measured at the T-Phase of the load side. When applying thermal stress to an MCCB for 6 hours at $180^{\circ}C$ using a heat resistant experimental device, it was found that the actuator lever was transformed and moved in the tripped state.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.143-157
• /
• 2012

By strengthening the market control and expanding the networks, providers of global logistics are expanding their service scope. The warehouses connect networks to internal and external warehouses by using logistics providers. The paper focuses on analyzing the efficiency of warehouses on each district. Therefore, the study classifies the factors which specify the efficiency of a total logistics of warehouse industry and warehouses' employees and the number of warehouses on district. Furthermore, the most recently published reports by National Center for Statistics in 2012 was used in order to guarantee credibility of the study. This study utilizes five years of materials, which are from 2005 to 2009. By applying SBM (Slack Based Measure), DEA Window model, and the Malmquist productivity model, the trend in efficiency and stableness were analyzed. The principal purpose of the paper is evaluating the efficiency. Also, analyzing its determinants and illustrating a long-term relationship between the regional warehouses and annual turnover of the warehouses were used as output measures. In addition, the number of warehouses of each region, employees, warehouses equipments, and the Logistics Warehouses Providers were used as input measurements. As a result, Malmquist productivity model and annual stableness has shown a continuous increasing. Ultimately, to be approved as product of Korea, a new stratiges that meet the standards and Rules of Origins by FTA should be developed. Therefore, there must be a development that takes regional characteristics into consideration.

• Anxiety and mood
• /
• v.12 no.2
• /
• pp.103-112
• /
• 2016

Objective : This study was conducted to examine the reliability and validity of the Measure of Constructs Underlying Perfectionism-Korean version (M-CUP-K). Methods : Two hundred and six normal subjects completed a battery of measures including M-CUP-K, Frost Multidimensional Perfectionism Scale-Korean version (FMPS-K), and Beck Depression Inventory (BDI). Psychometric properties of the M-CUP-K were analyzed. Results : The principal component analysis for construct validity resulted in 56 items composed of 6 factors (factor 1 : Dissatisfaction-Reactivity to Mistakes; factor 2 : Order-Details and Checking ; factor 3 : Satisfaction ; factor 4 : High standards ; factor 5 : Perceived Pressure from Others-Perfectionism toward Others ; factor 6 : Black and White Thinking about Tasks and Activities), compared to the original version. The M-CUP-K total and subscale scores were more strongly correlated with those of the other perfectionism-specific measure, FMPS-K, with a correlation of 0.822 (convergent validity) than with those of the nonspecific depression measure (discriminant validity). The Cronbach's ${\alpha}$ value for internal consistency of M-CUP-K was in an excellent range (r=0.872-0.935). The test-retest reliability for external validity suggested a good temporal stability with a total score correlation of 0.827. Conclusion : This study revealed that the M-CUP-K has good reliability and validity. Therefore, the M-CUP-K can be used as a promising measure of perfectionism in Korea.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.721-724
• /
• 2008

The present study was to develop a dry PFB method similar to the existing gypsum board construction method in order to apply the existing wet PFB method that uses fire.resistant adhesive. It was found that the existing wet method can produce concrete compressive strength of 80MPa and fire resistance of 3 hours with 30mm PF boards. The goal of development in this study was fire resistance of 3 hours through dry construction of 15mm fire resistant boards. The results of fire resistance test showed an increase in thermal durability and thermal strain. It is believed that inorganic fiber reduces thermal strain, and lowers heat insulation performance by 15% or less. This suggests that heat insulation performance was improved by the change in the inner composition of PF board resulting from the adjustment of Al:Si mol ratio, high temperature molding, and dry curing. According to the results of fire resistance test, when the dry PF method was applied, the temperature of the main reinforcing bar was 116$^\circ$C in 15mm, 103.8$^\circ$C in 20mm, and 94$^\circ$C in 25mm, and these results satisfied the current standards for fire resistance control presented by the Ministry of Land, Transport and Maritime Affairs. When a 3 hour fire resistance test was performed and the external properties of the specimen were examined, the outermost gypsum board hardly remained and internal PF board maintained its form without thermal strain.

• Korean Journal of Head & Neck Oncology
• /
• v.25 no.2
• /
• pp.138-142
• /
• 2009

Introduction : Although bilateral exploration has been thought to be the standard therapeutic modality for primary hyperparathyroidism(pHPT) due to the admirable cure rate, questions have remained as to whether bilateral neck exploration for all patients with pHPT is needed because 80-85% of patients with pHPT have a single parathyroid adenoma. If the diseased parathyroid can be determined preoperatively, a directed and minimal operation is appropriate using the recent innovations of preoperative diagnosis and operation techniques for parathyroid diseases, the radio-guided parathyroid surgery(RGPS) is one of the standards. In especial, RGPS has been reported beneficial in special circumstances, such as in recurrent disease, ectopic parathyroid, and in mediastinal parathyroid. It can be also useful for the parathyroid disease in previously explored or irradiated neck. Material and Methods : We experienced 2 cases of pHPT successfully treated by RGPS in who previously underwent extensive neck dissection and concomitant external or internal radiotherapy. We adopted and modified the technique described by Dr. James Norman at the University of South Florida-the minimally invasive parathyroidectomy using intraoperative nuclear mapping with 99mTc-sestamibi scanning and radioactivity detection probe. Results : We acquired the successful results for these patients. Conclusion : RGPS is thought to be the alternative technique for the patients with prior central neck exploration and irradiation.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.93-103
• /
• 2021

The special means of transportation introduced to improve the mobility of the transportation vulnerable met the number of legal standards in 2016, but lack of development in terms of quality, such as the existence of long waiting times. In order to streamline the operation of special means of transportation, long-term standby traffic, which is the top 25% of the wait time, was extracted from the Daegu Metropolitan Government's special transportation history data, and spatial autocorrelation analysis and social network analysis were conducted. As a result of the analysis, the correlation between the average waiting time of special transportation users and the space was high. As a result of the analysis of internal degree centrality, the peak time zone is mainly visited by general hospitals, while the off-peak time zone shows high long-term waiting demand for visits by lawmakers. The analysis of external degree centrality showed that residential-based traffic demand was high in both peak and off-peak hours. The results of this study are considered to contribute to the improvement of the quality of the operation of special transportation means, and the academic implications and limitations of the study are also presented.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2008

At present, the target amount of demand-side management and investment cost of EE (Energy Efficiency) program, which consists of high-efficiency appliances, has been estimated simply by the diffusion function based on the real historical data in the past or last year. In the internal and external condition, the penetration amount of each appliance has been estimated by Bass diffusion model which is expressed by time and three coefficients. And enough acquisition of real historical data is necessary for reasonable estimation of coefficients. In energy efficiency, to estimate the target amount of demand-side management, the penetration amount of each appliance should be primarily forecasted by Bass diffusion model in Korea. On going programs, however, lightings, inverters, vending machine and motors have a insufficient real historical data which is a essential condition to forecast the penetration amount using a Bass diffusion model due to the short period of program progress. In other words, the forecast of penetration amount may not be exact, so that it is necessary for the method of forecast to apply improvement of method. In this paper, the penetration amount of high-efficiency appliances is forecasted by Bass, virtual Bass, Logistic and Lawrence & Lawton diffusion models to analyze the diffusion progress. And also, by statistic standards, each penetration is compared with historical data for model suitability by characteristic of each appliance. Based on the these result, in the forecast of penetration amount by diffusion model, the reason for error occurrence caused by simple application of diffusion model and preferences of each diffusion model far a characteristic of data are analyzed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.189-204
• /
• 2016

The study is aimed at figuring out the effect of the consumers benefit, attitudes and interest when customers purchase functional food on purchasing intention and product a foundation of competitive power such as a customized product development for a marketing strategy by examining consumers' behavioral patterns. The range of functional food which is a subject of this study is included in the nutraceutical foods, protective foods in addition to biocontrol food. It surveyed about ages of 20 to 60 domestic residents who have taken functional food in order to conduct the study. Data used in this study was collected 353 answers in September 2016, and hierarchical analysis which is a demographic characteristic as control variables was conducted to verify the hypothesis using statistical program SPSS 21.0 The result of this study demonstrates that firstly, psychological pursued benefit secondly, health concern thirdly, health management attitude affects to functional purchasing intention. It is expecting that the result of this study will be used on the basic standards that are grasping and generalizing the needs of customers. In addition, it is also expecting to contribute to improvement of internal and external functional food industry as a functional food material development because it provides empirical customer behavior analysis result.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.155-187
• /
• 1992

The Korean economy has sustained high growth rate for almost three decades, that have been associated with the rapid expansion of manufacturing industries. In the beginning stage of development, the high growth of the Korean economy has been based on improvements in productivity obtained by the economies of scale. In that period, the improvements in productivity could be secured by the economies of scale in the export-oriented industries which are the labor- and material-intensive industries. In the latter half of the 1980s, the Korean economy went through rapid transition. Now Korea is at another juncture in its development process, where economic restructuring is critical to sustain high growth. However, economic restructuring in the 1990s call for much more concerted effort than before, since changes in internal and external conditions have profoundly altered the environment for economic development. If Korea is to sustain high growth in the 1990s, it has to promote balanced economic and social development in coordination with the smooth facilitation of industrial restructuring. There are no inherent conflicts among the issues involved, so they can be resolved by restructuring the economy to facilitate, in a global context, the development of knowledge- and technology-intensive activities and to ensure that the benefts of growth are reflected of qualitative improvements in national living standards. In this paper, we examined a scenario of structural changes using a mid- and long-term multisector model, in order to understand the conditions needed for realizing the growth potential. This examination explains the important features of the development course and policy directions that will help sustain high growth in the 1990s.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.201-215
• /
• 1993

The health status of workers in a foundry was analyzed in a study which consisted of evaluations of respiratory health together with environmental measurements. The results from environmental measurements showed values exceeding permissible exposure limits. A t-test was done with log transformed and untransformed data to examine the statistical significance for the noncompliance with exposure standards. For the analysis of categorical health outcomes, $\chi$-square test with 2 $\times$ 2 tables and logistic regression analysis were employed. For continuous variables, multiple linear regression was done against assessed risk factors. Pros and cons of different parameters in the compliance (or noncompliance) testing were presented. Respiratory function did not show any relation with occupational exposures, which may be due to the healthy worker effects. Strategies for controlling time dependent covariates were discussed in relation to the healthy worker effect. The scope of statistical analysis in occupational health studies is still limited in Korea without a suitable external comparison group such as credible vital statistics for the whole nation. Internal comparisons between different exposure status often result in unstable estimates of effect, and proportional morbidity study is discussed as an alternative potential research tool.