• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.25-33
• /
• 2023

The purpose of this study is to evaluate the impact of intermediate features on FER performance. To achieve this objective, intermediate features were extracted from the input images at specific layers (FM1~FM4) of the pre-trained network (Resnet-18). These extracted intermediate features and original images were used as inputs to the vision transformer (ViT), and the FER performance was compared. As a result, when using a single image as input, using intermediate features extracted from FM2 yielded the best performance (training accuracy: 94.35%, testing accuracy: 75.51%). When using the original image as input, the training accuracy was 91.32% and the testing accuracy was 74.68%. However, when combining the original image with intermediate features as input, the best FER performance was achieved by combining the original image with FM2, FM3, and FM4 (training accuracy: 97.88%, testing accuracy: 79.21%). These results imply that incorporating intermediate features alongside the original image can lead to superior performance. The findings can be referenced and utilized when designing the preprocessing stages of a deep learning model in FER. By considering the effectiveness of using intermediate features, practitioners can make informed decisions to enhance the performance of FER systems.

• Korea Trade Review
• /
• v.46 no.5
• /
• pp.83-98
• /
• 2021

This study aims to examine the effects of international trade in intermediate input on the implications of international business cycle properties in Korea. To do this, I have extended standard one goods New Keynesian international business cycle model to incorporate the role of intermediate inputs. After constructing the DSGE model, I have analysed the impulse response function and varian decomposition results. The results show that the model could introduce a new channel, that is, "cost channel" like Eyquem and Kamber (2014). In other words, the model has changed the dynamics of aggregate inflation by the cost channel. When the trade in intermediate goods increase, which is measured by openness of foreign input, the volatility of output, consumption and inflation increase two or three times. However, the model itself fails to explain the full account of cycle behavior of historical data, but the results imply that the trade in intermediate input assumption can help to improve the forecasting ability of international business cycle models.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.849-864
• /
• 2022

In case of a specific sector being divided into sub-sectors, this study presents a process for estimating an input-output table, which is frequently used as basic data in fields of energy and environment economics. RAS method, which is universally used for this case, requires information on production, intermediate input sum, and intermediate demand sum for each sector in the new table. But in many cases, it is difficult to secure information on intermediate demand sum by sector. This study suggests a process for estimating a new input-output table without using information of intermediate demand sum in the case of sector separation, under the assumption that information of production value and intermediate input sum by sector are available. The key idea is that the values of many elements in the input-output table after disaggregation are the same as those in the table before disaggregation and that the sum of the elements after disaggregation, equals the values of the elements before disaggregation. The process of estimating the intemediate transaction matrix or the input coefficient matrix is presented by using these information instead of intermediate demand sum information. A small-scale simulation shows that the average error rate of the process proposed in this study is about 11.23% in estimating input coefficients, which is smaller than the 11.30% estimation error of RAS using the information of intermediate demand sum. However, since it is known in the literature that using additional information does not always improve estimation performance compared to not using it, additional research on various simulations is needed to apply the method of this study to reality.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.266-271
• /
• 2001

In this study, the performance of the simultaneous heating & cooling water making system using R134a was investigated by simulation. The most important effect upon heating COP was intermediate pressure depending on input water temperature. With the input water temperature of $10^{\circ}C\;and\;20^{\circ}C$, optimum intermediate pressure were 923 and 1040kPa, respectively. At that optimum intermediate pressure, the maximum heating COP of the system operated between $0^{\circ}C$ evaporating temperature and $70^{\circ}C$ condensing temperature were 4.15 and 3.83. With installation of the subcoolers in high or low pressure section, the system COP was increased by reducing the refrigerant mass flow rate. Under the optimum pressure and $10^{\circ}C$ input water temperature, it was found that heating COP was maximized when the low-subcooler and high-subcooler capacity rate were taken by 14% and 13%, respectively.

• Tribology and Lubricants
• /
• v.32 no.4
• /
• pp.107-112
• /
• 2016

This paper presents a rotordynamic analysis of the reduction gear system applied to the 250 kW super critical CO₂ cycle. The reduction gear system consists of an input shaft, intermediate shaft, and output shaft. Because of the high rotating speed of the input shaft, we install tilting pad bearings, rolloer bearings support the intermediate and output shafts. To predict the tilting pad bearing performance, we calculate the applied loads to the tilting pad bearings by considering the reaction forces from the gear. In the rotordynamic analysis, gear mesh stiffness results in a coupling effect between the lateral and torsional vibrations. The predicted Campbell diagram shows that there is not a critical speed lower than the rated speed of 30,000 rpm of the input shaft. The predicted modes on the critical speeds are the combined bending modes of the intermediate and output shaft, and the lateral vibrations dominate when compared to the torsional vibrations. The damped natural frequency does not strongly depend on the rotating speeds, owing to the relatively low rotating speed of the intermediate and output shaft and constant stiffness of the roller bearing. In addition, the logarithmic decrements of all the modes are positive; therefore all modes are stable.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.240-245
• /
• 2019

Phase interpolation is widely adopted in frequency synthesizers and clock-and-data recovery systems to produce an intermediate phase from two existing phases. The intermediate phase is typically generated by combining two input phases with different weights. Unfortunately, this results in non-uniform phase steps. Alternatively, the intermediate phase can be generated by successive approximation, where the interpolated phase at each approximation stage is obtained using the same weight for the two intermediate phases. As a proof of concept, this study presents a 2-GHz 8-bit successive approximation digital-to-phase converter that is designed using 65-nm CMOS technology. The converter receives an 8-phase clock signal as input, and the most significant bit (MSB) section selects four phases to create two sinusoidal waveforms using a harmonic rejection filter. The remaining least significant bit (LSB) section applies the successive approximation to generate the required intermediate phase. Monte-Carlo simulations show that the proposed converter exhibits 0.46-LSB integral nonlinearity and 0.31-LSB differential nonlinearity with a power consumption of 3.12 mW from a 1.2-V supply voltage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5843-5849
• /
• 2015

This study analyzes the factor demand structure of sweet persimmon as a part of finding out cost cutting measures. Income and cost data from 2001~2013 Agricultural Income Survey are used for placing the translog cost function and estimating price elasticies and cross elasticities of labor, capital and intermediate input. The result shows that own price elasticities of all factors are small in absolute terms. Additionally the result indicates capital and intermediate input cannot be a substitution for labor, which is a top-line cost-share. It means that the demand for labor cconstitutionally can't be reduced in a short time. This implies that cost reduction should be done focusing on intermediate input, particularly on fertilizer and materials which have higher price elasticity of demand.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.632-641
• /
• 2004

In this paper, a new intermediate view reconstruction method employing a stereo image rectification algorithm by which an uncalibrated input stereo image can be transformed into the calibrated one is suggested and its performance is analyzed. In the proposed method, feature point are extracted from the stereo image pair though detection of the corners and similarities between each pixel of the stereo image. And then, using these detected feature points, the moving vectors between stereo image and the epipolar line is extracted. Finally, the input stereo image is rectified by matching the extracted epipolar line between the stereo image in the horizontal direction and intermediate views are reconstructed by using these rectified stereo images. From some experiments on synthesis of the intermediate views by using three kinds of stereo image; a CCETT's stereo image of 'Man' and two stereo images of 'Face' ＆ 'Car' captured by real camera, it is analyzed that PSNRs of the intermediate views reconstructed from the calibrated image by using the proposed rectification algorithm are improved by 2.5㏈ for 'Man', 4.26㏈ for 'Pace' and 3.85㏈ for 'Car' than !hose of the uncalibrated ones. This good experimental result suggests a possibility of practical application of the unposed stereo image rectification algorithm-based intermediate view reconstruction view to the uncalibrated stereo images.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.345-361
• /
• 2014

The systematic quality assurance activities on documents of the safety assessment are required for the safety case of the low- and intermediate-level radioactive waste disposal facility. In this paper, quality assurance system focused on the input data including the site characterization, groundwater flow, system design and monitoring are prepared and discussed. Rule for the input data selection is suggested and applied for the safety assessment which is based on the in-situ/experiment observations, final facility design and waste pileup plan, engineered barrier, field monitoring, recent biosphere, and radionuclide inventory. The reduction of data uncertainty will be expected to contribute to the safety of disposal facility further.