• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.107-108
• /
• 2019

The interlayer noise of the apartment house is a typical problem that reduces the quality of the residential environment. Therefore, many researchers have developed soundproofing materials that blocks noise between floors. However, most development technologies do not have the noise cut-off effect felt by residents, and may also have a defect in long-term deflection. In this respect, this study developed high-performance interlayer soundproofing material that can overcome existing problems. The developed technology has the noise reduction effect experienced by the residents and it has high durability without long-term deflection. Therefore, high-performance interlayer soundproofing material is expected to contribute to reducing disputes over noise between floors of apartment residents.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.501-505
• /
• 2013

It is well known that monolithic glass has specific coincidence dip allowing transmittance of noise around the critical frequency. Laminated glass, made of a polyvinyle butyral(PVB) interlayer sandwiched by two panes of glass sheet, has long served for the advantage in noise attenuation properties as well as the safety purpose. More research on the improvement of sound insulation performance is needed, considering much of the noise is still transmitted through the glass. As a preliminary study, authors have made several test specimens, varied combinations of glass and interlayer film, to optimize the acoustic performance. Experimental investigation was carried out to study the sound transmission loss of test specimens in the reverberation chamber by using sound intensity method. Several new applications, instead of the existing PVB laminated glass, show better results in sound transmission loss and low temperature have a bad influence on the acoustic performance.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.80-85
• /
• 2019

Generally, interlayer noise is measured in decibels (A) in terms of free field. In this paper, we propose a measurement method of interlayer vibration acceleration in the diffusion field perspective. The proposed method can represent a vibration-embodied formula similar to the sensitivity of earthquake intensity when the natural vibration of apartment house is measured by acceleration with its average value of $20mm/s^2$ represented by an the geometric progression of radix. Based on this theory, this paper proposes a method to show the optimal user experience (UX) by applying the interlayer vibration acceleration of the epicenter to the system of human - computer interaction (HCI).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.63-64
• /
• 2022

Inter-floor noise in an apartment building is a serious problem that causes conflicts between tenants. Accordingly, there are various attempts to solve this problem, but it is not easy to find a clear solution. Therefore, in this study, a soundproofing material between floors was developed that can improve the sagging that occurs after construction. And as a result of testing the developed interlayer soundproofing material, both light weight and weight were grade 1. And it was analyzed that maintenance performance could be improved with integrated structural characteristics.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.527-534
• /
• 2024

In this study, focuses on noise reduction between floors in the civil and architectural fields. Specifically, it investigates the application of newly developed 3D Textile to slabs to reduce interfloor noise. The effect of 3D Textile, through performance analysis via experiments and noise analysis using finite element method, provides a new understanding of noise reduction technology, and is expected to contribute to the improvement of living quality in residential spaces.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.249-250
• /
• 2018

To control the floor noise generated in the apartment building, a method of reinforcing the floor at the floor is applied. However, since existing buildings are difficult to reinforce upper generations, the ceilings of lower generations should be reinforced. The purpose of this study is to analyze the reduction effect by measuring the impact noise after reinforcing the floor soundproofing material on the ceiling of the existing building. In order to ensure the economical efficiency and flame retardancy of the products used as building interior materials, the existing polyurethane foam was impregnated with mineral to prepare test specimens and attached to the concrete slab surface. As a result, it was shown that heavy impact sound can reduce 2dB~5dB and light impact sound can reduce 4~8dB.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.196-199
• /
• 2004

Seedlayers with low surface energy which increases the density of nucleation sites in the initial growth region of the recording layer deposited on them was studied to reduce grain size in recording layer. The seedlayer with low surface energy was so effective to attain finer grain in magnetic upper-layers. The Ni-Fe-O intermediate layer with low surface energy was found to be effective in reduction of grain size as well as magnetic cluster size of Co-Cr-Ta-Pt recording layer. Furthermore, the reduction of grain size in Co-Cr-Ta-Pt recording layer on Ni-Fe-O intermediate layer with low surface energy led to decrease the noise level in the high recording density region.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.38-39
• /
• 2018

Foame concrete was used to reduce insulation problems and interlayer noise in slab. There have been no studies on the physical properties of foaming agents using foamed concrete,Only the physical properties of foamed concrete mixed with foam agent. It is judged that the density and distribution of Foams will be changed when the pressre is changed when the bubble is formed. In this study to investigate the changes of Foam density and the physical performance of foamed concrete by changing the pressure during Foam formation.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.89-98
• /
• 2017

The floor heating method generally uses a wet construction method including the installation of resilient material, lightweight foam concrete, heating piping, and finishing mortar. Such a wet construction method not only delays other internal finishing processes during curing period for two mortar pouring process, but also has a disadvantage that it is difficult to replace the floor heating layer when it deteriorated because it is integrated with the frame. Dry floor heating construction method can be a good alternative in that it can solve these defects. Conversely, when it applied to the wall structure that is vulnerable to the interlayer noise compared with the column-beam structure, the question about the heavy-impact sound(HIS) insulation performance is raised. Therefore, conventional dry floor heating method is hard to apply to the wall structure apartments. Therefore, for the purpose to improve the applicability of dry floor heating method in wall structure apartments, this study investigated the change of floor impact sound, especially HIS insulation performance which is one of the required performance for the floor structure. This study tried to examine whether the change of heavy-impact sound pressure level(SPL) shows a tendency at the significant level according to the shape and mass of the floor structure. Through filed experiments on wall structure apartment, this study confirmed that the form of the raised floor shows better HIS insulation performance than the fully-supported form. In addition, it was also confirmed that the HIS insulation performance increases with the mass on the upper part. Moreover, this study found the fact that a mass of about 30 kg/m² or more should be placed on the upper structure to reduce the heavy-impact SPL according to the bang machine measuring method. Although this study has a limit due to insufficient experiment samples, if the accuracy of this study is increased, it will contribute to the diffusion of dry floor heating by setting the HIS insulation performance target and designing the dry floor heating structure that meets the target.