• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.82-94
• /
• 2009

In this study, I suggest dyed-Glued laminated woods by using birch woods which are relatively cheaper than others. Since the dyed-Glued laminated woods which have the various colors to satisfy people's tastes and the dignified grains in the old woods enable us to product freely, these can provide us with stability of supply through replacing rare materials. The making wooden furniture designed with dyed-Glued laminated woods has these following characteristics. (1) This method which uses various colored woods can fulfill consumers' tastes through dyeing wooden plates, instead of using domestic woods which have limited colors-white, yellow and black. (2) Gathering wooden plates made by setting them into various frames enables us to get in large quantities of the materials with good grains, which we can only take from old woods. (3) Producing culture products using various colors and grains has enabled us to satisfy consumers and to create pro-environmental pieces. In conclusion, this study can be an alternative idea to forest resources which have been decreasing, and be an application method of using cheaper birch woods as well. Gathering and dyeing wooden plates might bring about the economic effect and be of much help to the expansion as furniture materials as well as interior ones.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.43-50
• /
• 1999

The safety-evaluation of ancient wood structures has been executed with only visual inspection. The application of NDE(nondestructive evaluation) is required because the visual inspection has many restrictions. Among many NDE techniques, the stress wave technique was used in this research. This study focused on evaluating the extent of decay in members of ancient structures, using stress wave nondestructive technique. For application of stress wave technique to ancient structures, the threshold time which divides members into categories according to degree of decay should be determined in advance. Stress wave timer (Metriguard Model 239A) was used in this study, specimens used in this research were the members obtained from six ancient structures. All specimens were identified as Hard Pine(Pinus densiflora S. et Z. or Pinus thunbergii P.) by microscope. Each member was tested with stress wave passing radially through the pith. In this study, the stress wave time of $12{\mu}s$/cm could distinguish between sound and decayed specimens with accuracy of 77.5 percent. Also, decayed specimens could be separated into moderate and severe categories by stress wave time of $20{\mu}s$/cm. Among the three decay location groups (exterior, mixed, interior), the exterior group could be classified into sound, moderate and severe decay with the greatest accuracy. Stress wave transit time was not sensitive to small decay pockets located in interior of the member.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.213-214
• /
• 2019

Oriented strand board(O.S.B) is used in many areas, such as interior and interior finishes of wooden houses, but no cases and studies have been used as flooring materials for flooring boards. In this study, we will examine the quality and performance of the aromatic strands board, which we believe can be substituted for the plywood, and analyze its suitability as a floorboard.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.70-82
• /
• 2016

The playgrounds installed in the city try a variety of changes in play equipment more than traditional playgrounds, these playgrounds with formal rides are still different from nature friendly playground. For this reason, when in 2014 the department of environment pushed forward 'Aitteulag' project constructing ecological playground, the department aimed to provide the natural ecological spaces that are insufficient in the city and act as play space for children, leisure and community space for residents. Therefore, after inspecting 10 ecological playgrounds in Europe and Japan, in this study we suggested the construction guidelines of ideal ecological playground by comparing and analyzing these cases. We checked the environment-friendliness of these playgrounds in the 2 fields (playground component, ecological program) based on the ecological playground guidelines presented by the ministry of environment. The playground components are classified as siting location, spatial configurations, natural elements, play area, amusement facilities, play materials, open spaces, additional facilities. The ecological programs are divided into habitat, species, natural material, five senses. The following is the summary of the results about the reflection of eco-friendly planning factors. In terms of "habitat": bush and shade wood were highest at 95%. In terms of "species": local indigene(100%) and habitat for insects(95%) were higher than others. In terms of "natural material": wood(61.1%) was the highest. In terms of "details of wood(61.1%)": wood fence (95%), exploring wood and using sticks(85%) were higher than others. In terms of "five senses": hearing (32.1%), tactile(26.4%), and visual(23.9%) were in order. Therefore, on the basis of these results, this study proposed the planning factors that should be considered and complemented more in the construction of domestic urban ecological playground in future.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.46-53
• /
• 2012

The purpose of this study was to investigate the functional properties of Changhoji with natural dyeing. This research would provide a basic information for interior material Changhoji. To estimate functional properties of super eight colors Changhoji, water staining, lightfastness, and floodlight color test were executed. In term of the water staining test, blue color showed the clear and other colors showed the little spot. As a result of measuring the lightfastness, Magenta color dyed with sappanwood showed the worst. But blue color dyed with indigo and Turquoise color dyed with indigo and Pagoda tree flower showed the highest. As a result of floodlight color test was no difference between sample color and floodlight color.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.36-46
• /
• 2011

The purpose of this study was to manufacture colored Hanji for interior materials by combining color therapy and natural dyeing. To manufacture colored Changhoji for interior materials, seven species of dyestuff were selected as a results of preliminary natural dyeing. As mordants, 0.5% $AlK(SO_4)_2{\cdot}12H_20$ and 0.5% $Cu(CH_3COO)_2{\cdot}H_2O$ solution were used respectively. To estimate natural dyeing properties of Changhoji, the value of $L^*,\;a^*,\;b^*$ and Munsell HV/C were measured by spectrophotometer. The super eight colors produced as follows; red from safflower, orang from goldthread and gardenia, yellow from turmeric, green and turquoise from indigo and pagoda tree flower, violet and magenta from sappanwood, and blue from indigo.

• Korean Institute of Interior Design Journal
• /
• no.15
• /
• pp.62-68
• /
• 1998

Children develop in direct relation and response to their physical environment, The purposes of this study were to investigate the current interior design conditions of classrooms in kindergarten and to provide interior planning guidelines for children's behavioral and developmental improvement and better educational environment. Data were collected through interview and questionnaire survey. The sample included 239 teachers who were employed in 23 kindergartens located in Pusan. The data were analyzed by using SPSS-PC. The major findings were as follows; (1) Wood and wallpapers which provide various colors and patterns are recommendable as a classroom finish rather than paint which looks monotonous. (2) Teachers preferred 7 or 8 activity centers in classroom and furniture or partition is the best when dividing space. (3) Classroom should be large enough to locate various types of furniture that designed based on child-size and objects to store. (4) Activity centers should be lit by different types of task lighting such as floor lamp and backer to provide sufficient level of light.

• Korean Institute of Interior Design Journal
• /
• v.24 no.4
• /
• pp.91-98
• /
• 2015

Double skin façade is known that several features affected the building energy and daylighting performance. That is why the envelope is able to consist of all architectural materials such as glass, aluminum, wood and insulation for vision of residents and workers in buildings. Its specifications is very diverse according to the building designers and building owners. In recent times, visual environment became a major focus and resulted in the development of cutting edge engineering of diverse glazing systems and shading devices by growing interests of friendly environment. Thus this research has evaluated the fluctuations of interior lighting and atmospheric conditions based on double skin facade systems. Especially in terms of daylighting environment as dependent on solar variations, this research provides quantitative analysis of interior lighting conditions and how it affects the living conditions as well as improve the design of interior spaces.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.137-144
• /
• 2016

Wood plastic composite (WPC) is a green composite made of wood flour and thermoplastics to provide better performance by removing the defects of both wood and plastics. However, relatively low thermal stability and poor fire resistance of wood and plastics included in WPC have been still issues in using WPC as a building material for interior applications. This study investigated the effect of environmentally-friendly flame retardants (EFFRs) on the mechanical, thermal, morphological, and water absorption properties of wood flour (WF)/talc/polypropylene (PP) composites in comparison with neat PP. The whole EFFRs-filled WF/talc/PP composites showed higher values in flexural strength, flexural modulus, and impact strength compared to neat PP. In thermal properties, aluminum hydroxide (AH)-filled composite showed a $36^{\circ}C$ reduction in maximum thermal decomposition temperature ($T_{max}$) compared to neat PP, but magnesium hydroxide (MH) played an important role in improving thermal stability of filled composite by showing the highest $T_{max}$. From this research, it can be said that MH has potentials in reinforcing PP-based WPCs with improvement of thermal stability.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.122-127
• /
• 2016

The increasing interest in the environment and climate change around the globe, while the importance of building energy saving is increasing. The building energy simulation program is used for evaluating of energy performance of buildings. However, an input value of wood thermal conductivity in the programs is different from each other. Therefore, in this study, wood thermal conductivity was measured according to species. Through construction database by species of wood, the error of simulation program are able be decreased. In addition, if used as a structural and interior of buildings, the thermal conductivity and moisture of the wood is difficult to apply to the program because they were changed according to the occupant's lifestyle. In this paper, thermal conductivity and moisture content.of wood confirmed changes in the constant temperature and relative humidity ($25^{\circ}C$, 50% R.H.) condition.