• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.829-837
• /
• 2014

The KOMPSAT-3 can acquire panchromatic stereo image with 0.7 m spatial resolution, and provides Rational Polynomial Coefficient (RPC). In order to determine ground coordinate using the provides RPC, which include interior-exterior orientation errors, its adjustment is needed by using the Ground Control Point (GCP). Several thousands of national Unified Control Points (UCPs) are established and overall distributed in the country by the Korean National Geographic Information Institute (NGII). UCPs therefore can be easily searched and downloaded by the national-control-point-record-issues system. This paper introduced the point-extraction method and the distance-bearing method to detect of UCPs. As results, the distance-bearing method was better detected through the experiment. RPC adjustment using this method was compared with that by only one UCP and GCPs using GPS. The proposed method was more accurate than the other method in the horizontal. As demonstrated in this paper, the proposed UCPs detection method could be replaced GPS surveying for RPC adjustment.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.731-736
• /
• 2008

There was in a building and with the technical advance for a energy saving the secret efficiency of the building improved together and continuously was come. The indoor air environment brought about the deterioration which is remarkable because of it. But time of most the indoor air environmental matter is one in the element which healthily affects biggest in the moderns who lives from the interior space. Today the plan for the air environmental maintenance which dwelling space is appropriate is demanded, is the actual condition where the method of the ventilation control which is energy saving and efficient is necessary. From the research which it sees, number of ventilation 0.7 time of the aeration which is a domestic legal baseline is excessive is judged from the research which sees, The sleep hour assumes it stays most long the hour when, number of ventilation 0 time 0.1 times 0.4 times $CO_2$ consistency measurements and analyzes number of ventilation conclusive escape. And $CO_2$ peak point control leads it decides a data, effective and it talks an energy saving circulation control method and it does to sleep.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.541-548
• /
• 2017

An increasing concern is paid to short-term voltage stability with the growth of penetration of induction motor loads. Reactive power reserve(RPR) of power system is critical to improve voltage stability. A definition of short-term voltage stability-related RPR(SVRPR) is proposed. Generators vary their contributions to voltage stability with their location and system condition, etc. Voltage support coefficient based on the second-order trace sensitivity method is proposed to evaluate SVRPR's contribution to short-term voltage stability. The evaluation method can account for the generator's reactive support in transient process and the contingency severity. Then an optimization model to improve short-term voltage stability is built. To deal with multiple contingencies, contingency weight taking into account both its probability and severity is proposed. The optimization problem is solved by primal dual interior point method. Testing on IEEE_39 bus system, it is indicated that the method proposed is effective. Short-term voltage stability is improved significantly by the way of SVRPR optimization. Hence, the approach can be used to prevent the happening of voltage collapse during system's contingency.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.21-30
• /
• 2009

A point of view has been diversified where it has been put. We are living in the era that requests many standpoints to us to understand relations involved with me and my surrounding and it will speed up as the aspect has been changed so far. This phase is not exceptional to the design. Various spaces engaged in us have an immaterial phenomenon as composed by, so it is conceptualized to try the other way differentiated before. On the other hand, we can often meet examples of a literature scenario through conceptualizing an immaterial phenomenon as organized. Because of the difference between an individual's value and environment, it is criticized because of limitation to probe right and wrong of the objective feasibility. However, it is requested that this method needs to have an organized grammar in the interconnection broken of the standard of right and wrong in the science as well as goodness, evil and beauty in the morality. Nowadays a montage, which means the way to create objective by combining different points, is more multifariously applied in the generation of mixture asking various meanings and signifier and it's been widely extended. This study intends to pursue a new methodical approach focused on a characteristic of the montage and puts the goal on deduction for an expressive way of a montage specificity practically indicated at the shopping space through the space translation of the montage conception as well as plot of a movie. In conclusion, this study is how to be expressed of the montage expression method to understand.

• Korean Institute of Interior Design Journal
• /
• v.23 no.3
• /
• pp.48-55
• /
• 2014

Luis Barragan is a representative Mexican architect. He designed architectural space as a local architect in consideration of the Mexico's harsh Mediterranean climate. His manifestation of the regionality can be found mainly in his precise expression of light. Such method and concept of using light in Barragan's architecture made a huge impact on later architects but detailed studies on this issue have not been made actively. Hence, this paper intended to suggest a starting point or an orientation by illustrating the characteristics of using and expressing light in architecture through his cases of housing works. The study method was as follows. First, the general characteristics of light were identified by analyzing the elements of architectural space that dealt with light and the characteristics of expressing light shown in the architectural space. Second, the architectural background of Luis Barragan and the architectural space elements of the light expressed in his architectural space were extracted to form a hypothetical ground. Third, five of his works on the houses in his prime (after the year of 1945) were analyzed to explore the characteristics of relational representation between light and the architectural space elements in his architecture. Through this process, it was learned that, in his architectural works, light was the embodiment of the location-related, time-based, daily and illusionary experience into architecture. In addition, meditative light could be experienced by contrasting the soft and dispersed light and shadow of the inside space of Barragan's houses with the strong external light. Therefore, through the process above, this study is hoped to provide an opportunity for the contemporary architects of our era to rethink the fundamental correlation between architecture and light.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.135-140
• /
• 2012

Interior Permanent Magnet Synchronous motors (IPMSM) with concentrated winding are superior to distributed winding in the power density point of view. But it causes huge amount of eddy current losses on the permanent magnet. This paper presents the optimal permanent magnet V-shape on the rotor of an interior permanent magnet synchronous motor to reduce the core losses and improve the performance. Each eddy current loss on permanent magnet has been investigated in detail by using FEM (Finite Element Method) instead of equivalent magnetic circuit network method in order to consider saturation and non-linear magnetic property. Simulation-based design of experiment is also applied to avoid large number of analyses according to each design parameter and consider expected interactions among parameters. Consequently, the optimal design to reduce the core loss on the permanent magnet while maintaining or improving motor performance is proposed by an optimization algorithm using regression equation derived and lastly, it is verified by FEM.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.163-171
• /
• 2017

Brick is not only aesthetically beautiful and emotional material, but also eco-friendly and good building commodity for human health. Nonetheless, the use of brick has declined, due to the difficulty of building high-rise buildings and the limitation of the free form implementation. However, modern society is increasingly interested in environmentally friendly finishing materials for solving environmental problems. From this point of view, the brick architecture is being reexamined as a material to improve the living environment and to provide comfort without destroying nature. In addition, the development of digital technology enables the implementation of various types of masonry method and curved forms. Parametric design is one of the ways to realize the curved forms and various architectural expressions for brick architecture. In this background, the purpose of this study is to develop algorithms that can easily generate curved brick walls through parametric design, enable various pattern designs, and respond to real-time feedback. The details of the study are as follows. First of all, we examine organic architecture, the trend of brick architecture, and the concept of parametric design. Secondly, In order to generate curved surface with complex curvature, major planning factors affecting form generation are examined. Finally, we develop a parametric design method that consists of generating a curved surface for brick arrangement, implementing a parametric algorithm, and generating a curved form using bricks. Consequentially, we propose an algorithm that can maximize the use of ready-made bricks without using cut bricks to design curved walls and present efficient and economical design alternatives.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.370-380
• /
• 1995

선형계획법의 해법으로 최근에는 내부점기법(Interior Point Method)가 관심 을 끌고 있다. 이 내부점 기법은 계산복잡도 뿐만 아니라 수행속도면에서도 우수한 결과를 보이고 있다. 이 방법은 매 회 대칭양정치(Symmetric Positive Definite)인 선형시스템을 풀어야 하는데 이 과정이 전체 내부점 수 행시간의 80-90%를 차지한다. 따라서 내부점 기법의 수행속도는 대칭양정치 인 선형시스템을 효율적으로 푸는 방법에 달려 있다. 대칭양정치인 선형시스 템을 풀기 위해서는 상하분해를 이용하게 되는 데 가우스소거를 이용해서 상하 분해를 하는 경우 매 단계에서 행렬의 모든 요소를 가지고 있을 필요 가 없다. 행렬의 모든 요소에 대한 정보를 동시에 필요로 하지 않는다. 즉, 현 단계에서 가우스소거와 관련된 열들에 대한 정보만 있으면 상하 분해가 가능하고 이러한 개념을 이용한 방법이 프런탈방법이다. 프런탈 방법은 대형 선형계획 문제를 풀기에 유리하다는 장점이 있다. 이러한 프런탈 방법을 확 장해서 동시에 여러 개의 프런탈을 계산하는 방법이 멀티프런탈방법이다. 이 방법은 알고리듬 자체가 병렬처리에 적합하기 때문에 병렬처리와 관련해서 도 많은 연구가 수행되고 있다. 본 연구에서는 삭제나무(Elimination Tree)를 이용한 프런탈 방법과 프런탈방법에 슈퍼노드의 개념을 도입한 슈퍼노들 프 런탈방법등에 대해서 이제까지의 연구 현황을 알아보고 프런탈방법에 적합 하고 효율적인 자료 구조와 멀티프런탈 방법에 적용 가능한 병렬알고리듬에 대하여 연구하고자 한다. 본 연구결과 기대효과로는 프런탈 방법에 적합하고 효율적인 자료 구조와 멀티프런탈 방법에 적용 가능한 병렬알고리듬을 개발 함으로써 내부점 선형계획법의 수행속도의 개선에 도움이 될 것이다.성요소들을 제시하였다.용자 만족도가 보다 높은 것으 로 나타났다. 할 수 있는 효율적인 distributed system를 개발하는 것을 제시하였다. 본 논문은 데이타베이스론의 입장에서 아직 정립되어 있지 않은 분산 환경하에서의 관계형 데이타베이스의 데이타관리의 분류체계를 나름대로 정립하였다는데 그 의의가 있다. 또한 이것의 응용은 현재 분산데이타베이스 구축에 있어 나타나는 기술적인 문제점들을 어느정도 보완할 수 있다는 점에서 그 중요성이 있다.ence of a small(IxEpc),hot(Tex> SOK) core which contains two tempegatlue peaks at -15" east and north of MDS. The column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$<

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.339-341
• /
• 1999

본 논문에서는 연상 메모리 기능을 수행하는 셀룰라 신경망(Cellular Neural Netowork)의 설계를 위한 새로운 방법론을 제안한다. 먼저, 셀룰라 신경망 모델의 기본적 특성들을 소개한 후, 최적 성능을 가지고 이진 원형 패턴들을 저장할 수 있는 셀룰라 신경망 모델의 설계 방법을 제약 조건이 가해진 최적화 문제로 공식화한다. 다음으로 이 문제의 제약 조건을 선형 행렬 부등식(Linear Matrix Inequalities)을 포함하는 부등식의 형태로 변환시킬 수 있음을 관찰한다. 마지막으로 셀룰라 신경망 최적 설계 문제를 내부점 방법(interior point method)에 의해 효율적으로 풀릴 수 있는 일반화된 교유값 문제(Generalized Eigen Value Problem)로 변환하고 설계 예제를 통해 제안된 방법의 유효성을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.786-792
• /
• 2011

The present paper presents an optimal capacitor placement (OCP) algorithm for voltagestability enhancement. The OCP issue is represented using a mixed-integer problem and a highly nonlinear problem. The hybrid particle swarm optimization (HPSO) algorithm is proposed to solve the OCP problem. The HPSO algorithm combines the optimal power flow (OPF) with the primal-dual interior-point method (PDIPM) and ordinary PSO. It takes advantage of the global search ability of PSO and the very fast simulation running time of the OPF algorithm with PDIPM. In addition, OPF gives intelligence to PSO through the information provided by the dual variable of the OPF. Numerical results illustrate that the HPSO algorithm can improve the accuracy and reduce the simulation running time. Test results evaluated with the three-bus, New England 39-bus, and Korea Electric Power Corporation systems show the applicability of the proposed algorithm.