• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.351-357
• /
• 2008

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. The geometric relationship of oblique cameras and a vertical camera can be modelled by 6 exterior orientation parameters. Once the relationship between the vertical camera and each oblique camera is determined, the exterior orientation parameters of the oblique images can be calculated by the exterior orientation parameters of the vertical image. In order to examine the exterior orientation of both a vertical camera and each oblique cameras in the multi-looking camera relatively, calibration targets were installed in a lab and 14 images were taken from three image stations by tilting and rotating a non-metric digital camera. The interior orientation parameters of the camera and the exterior orientation parameters of the images were estimated. The exterior orientation parameters of the oblique image with respect to the vertical image were calculated relatively by the exterior orientation parameters of the images and error propagation of the orientation angles and the position of the projection center was examined.

• Korean Journal of Remote Sensing
• /
• v.24 no.3
• /
• pp.223-233
• /
• 2008

In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.272-279
• /
• 2012

Apartments with a southern exposure are often thought to have advantages in receiving winter sunlights and summer natural ventilation. However, as due-south-apartments increase recently, the consideration for residential environment for households with no southern exposure is necessary. In case of due-south-apartments, residents prefer east-sided apartments than west facing apartments which might receive more hot sunlight in the afternoon; however in case of west-oriented apartments with active ventilation, the interior area is bright until late afternoon without unpleasant heat and has advantage in light environment aspects. This study aims to compare and analyze merits and demerits of air flow and sunlighted environment of buildings through sunshine duration simulation using CFD simulation ad sunlights about southeast-sided and southwest-sided apartments based on general opinions for apartment directions. As results of the interior natural ventilation analysis, as the average air flow speed in southwest-sided apartments was 1m/s faster than that of southeast-sided, it has effects of lowering sensory temperature of residents in summer, and for sunlighted environment, southwest-sided apartments are advantageous for sunlighted area for duration time inside. As a result of the research, the calculation of physical residential environment of apartment residential space should be reached through integrated evaluation of natural ventilation and sunlighted time from placement and facing direction of the buildings considering characteristics and environment of each apartment, not based on general opinions.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.407-419
• /
• 2002

In this study, the design of 4S-Van system is discussed fur the implementation of laser mapping system. Laser device is fast and accurate sensor that acquires 3D road and surface data. The orientation laser sensor is determined by loosely coupled (D)GPS/INS Integration. Considering current system architecture, (D)GPS/INS integration is performed far performance analysis of direct georeferencing and self-calibration is performed for interior and exterior orientation and displacement. We utilized 3 laser sensors for compensation and performance improvement. 3D surface data from laser scanner and texture image from CCD camera can be used to implement 3D visualization.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.2
• /
• pp.15-21
• /
• 2005

This study is to trace the change of stream shape using the past series of aerial photographs, and to compare the land use changes of riparian area along the stream. For the Gyeongan national stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho-photographs were made with interior orientation and exterior orientation, respectively. Apparent changes of the stream were found that the consolidated reaches of stream by levee construction became straight together with widening of their stream widths. Especially the stream width of inlet part of Paldang lake widened almost twice because of the rise of water level by dam construction in 1974. The land use of riparian areas of three selected years were classified into six categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing method. The forest and agricultural lands decreased and urban area increased as the stream maintenance had been performed.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2004

The microstructural changes of Al-Zn-Mg-Cu alloy containing Sc during hot extrusion and post heat treatment were investigated. Two kinds of Al-Sc alloys with different alloying elements (B1, B2) were hot extruded to make T-shape bars at extrusion temperature of $380^{\circ}C$, then the bars were solution treated at $480^{\circ}C$ for 2hrs followed by artificial aging at $120^{\circ}C$ for 24hrs. The interior microstructure of as extruded bar consisted of elongated grains, however, fine equiaxed grains were also observed around surface. The microstructural gradient suggested that different restoration process could proceed during the hot extrusion. For B1 and B2, different grain growth behaviors were found around the surface during the post heat treatment. Rapid grain growth behavior was observed for B1 around the surface, however, it was not observed for B2. Orientation pinning, which was related with the evolution of preferred orientation, and precipitation were thought to be responsible for the rapid grain growth.

• KIEAE Journal
• /
• v.11 no.5
• /
• pp.137-143
• /
• 2011

An atrium space, unlike ordinary office rooms, accommodates variety of activities such as moving and resting of people and usually houses variety of vegitation to improve amenity and indoor environment. Many atrium buildings in Korea have been designed by considering the environmental criteria for human beings, not for the vegitation in the atrium space. Especially the daylighting designs are mostly focused on the required illuminances for various visual tasks of the occupants and glare controls. As a result, some atrium spaces do not provide sufficient light to the interior plants. Consequently, these atrium spaces require a high level of electric lighting to compensate the deficit of natural light for the photosynthesis of the vegitation. The purpose of this study was to suggest design guidelines for 4-sided atrium spaces having different well indices (WI), plan aspect ratio (PAR), and cardinal orientation. The findings from this study might be referenced by building designers when designing or selecting canopy systems by considering the daylight performances of the uncovered atrium spaces. In the study, the daylight performance was evaluated in terms of daylight autonomy (DA).

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.3-12
• /
• 2016

The purpose of this study was to analyze City squares in Europe according to Biophilic Design elements to apply domestic Indoor Squares in Mixed-use building for relaxation. This study seeks to present a direction for designing an indoor square that uses the aspects of European city square. The following details consist the purpose of the study. First, Perspective from the Biophilic design and analyzing criteria of Europe city square. Second, European city square is analyzed to establish the criteria to be applied to indoor square. Third, based on European city square analysis, the planning direction for domestic indoor square is suggested. This result of paper proceeds as follows. First, it describes the analysis of the Indoor Squares of the domestic Mixed-use building. The results were derived of the fact that not applying the water elements and Facade greening. Second, In Europe Square, It is accounted for the highest proportion (33%) of the spaciousness. Third, Through a comparative analysis domestic indoor square was derived that the higher the need to improve the spaciousness and botanical motif. It is the ultimate goal of this study based on the analysis of the city square to set the criteria for the biophilic design of the indoor square to present the orientation of the indoor square.

• Composites Research
• /
• v.12 no.5
• /
• pp.65-79
• /
• 1999

This paper descrives the method to analyzed the free vibratioin of supported composite cylindrical shells with a longitudinal, interior rectangular plate. To obtain the free vibration characteristics before the combination of two structures, the energy principle based on the classical plate theory and Love's thin shell theory is adopted. The frequency equation of the combined system is formulated using the receptance method. When the line load and moment applied along the joint are assumed as the the Dirac delta and sinusolidal function, the continuity conditions at the joint of the plate and shell are proven to be satisfied. The effects on the combined shell frequencies of the length-no-radius ratios and radius-to-thickness ratios of the shell, fiber orientation angles and orthotropic modulus ratios of the composite are also examined.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.35-42
• /
• 2006

'Place' as the spacial concept became now key concept in the environments and architecture from the mid 20th century. The purpose of this study is to explain the placeness in Aldo Rossi's architecture according to space sequence. Aldo Rossi has attempted to apply the typological elements for the restoration of place in the cites and buildings which had ruined by modem architecture. Therefore It would be important for us to find out a method which making placeness in Aldo Rossi's architecture. Experiencing place could be examined by the method of space sequence. The experience of place is related to the experience of the human body in architecture space. The experience of place in space can make a unique placeness of architect. And, the experience of the place through the movement of the body and the vista, is the key elements of space sequence to explain the placeness in architecture. The results of this research are following. (1)Key space which related to movement of human body in Aldo Rossi's architecture make a set consisted of a goal space and the surrounding space. (2)The Arrange of Space and the formation of the boundary is more complex in the dispersed buildings than that of the single building. (3)The typological elements like a courtyard, a cylinder and the axis in the buildings made the goal space and helping people to find the orientation of human body.