• Earthquakes and Structures
• /
• 제4권4호
• /
• pp.429-449
• /
• 2013

Current Design Codes for Reinforced Concrete (RC) interior beam-column joints are based on limited experimental studies on the seismic behavior of eccentric joints. To supplement existing information, an experimental study was conducted that focused on the effect of eccentricity of the deeper beams with respect to the shallow beams. A total of eight one-third scale interior joints with beams of different depths were subjected to reverse cyclic loading. The primary variables in the test specimens were the amount of joint transverse reinforcement and the cross section of the shallow beams. The overall performance of each test assembly was found to be unsatisfactory in terms of joint shear strength, stiffness, energy dissipation and shear deformation. The results indicated that the vertical eccentricity of spandrel beams in this type of joint led to lower capacity in joint shear strength and severe damage of concrete in the joint core. Increasing the joint shear reinforcement was not effective to alter the failure mode from joint shear failure to beam yielding which is favorable for earthquake resistance design, whereas it was effective to reduce the crack width at the small loading stages. Based on the observed behavior, the shear stress of the joint core was suggested to be kept as low as possible for a safe and practical design of this type of joint.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.520-526
• /
• 2012

화포에서 탄저 압력이 포미 압력 보다 높은 역압력 구배가 발생하면 화포에 잠재적인 충격이 증가하는 것으로 알려져 있다. 화포의 안전성을 확보하기 위해 발사 과정에서 이 역압력 구배를 최소화시키는 설계가 필요하다. 이에 수치 해석을 통해 점화제 연소율이 역압력 구배에 미치는 영향을 조사하였다. 점화제 연소율 상수가 증가할수록 역압력 구배는 증가하였고, 특정 연소율 계수에서 급격한 압력변동이 발생하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.44-45
• /
• 2021

In Korea, the risk of fire in buildings is increasing. Therefore, efforts are needed to reduce casualties and property damage. Accordingly, it is important to limit the flashover so that the fire inside the building does not expand to the outside. Flashover refers to the generation of upward airflow after the fire in the compartment, and when combustible gas accumulates in the upper part of the fire chamber and reaches about 500℃, explosive expansion combustion occurs inside the compartment. This can suppress flashover due to limitations on building interior materials. To this end, internal limitations are being implemented at home and abroad through standards related to internal materials. In this paper, we intend to secure basic data on domestic fire safety design by comparing domestic and foreign standards and reviewing the Japanese housing interior design manual.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.49-59
• /
• 1998

The damage mechanism of $Cr_2O_3$ plasma coated soda-lime glass and uncoated glass by steel ball particle impact was analyzed in this study. And the shape variation of the cracks was investigated by stereo-microscope according to the impact velocity and steel ball diameter. In order to improve the damage reduction effect by $Cr_2O_3$ coating layer, crack size was measured and surface erosion state was observed for both of two kinds of specimen after impact experiment. And the results were compared with each other. The 4-point bending test was performed according to ASTM D790 testing method to evaluate the effect of coating layer for bending strength variation. As a result, it was found that the crack size of $Cr_2O_3$ coated specimen was smaller than that of uncoated one, because of the impact absorption by interior pores in the coating layer and the load dispersion by the structural characteristic of the coating layer. For the specimens subjected to the steel ball impact, the bending strength of coated specimen was higher than that of uncoated specimen.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.218-223
• /
• 2018

In this study, we proposed a new ultrasonic-chemical decontamination process for decontaminating radioactive corrosion products during the maintenance of reactor coolant pump (RCP). The actual decontamination process was reproduced in the laboratory. And the corrosion characteristics of stainless steel (STS), constituting the RCP interior parts, were examined. The weight-loss measurment and polarization experiment were carried out in order to determine the corrosion characteristics of STS 304 and STS 415 by repeated decontamination processes. The STS 304 presented a little corrosion damage, which was almost indistinguishable from visual observation. The weight-loss rate of STS 304 was also significantly lower. On the other hand, STS 415 showed severe corrosion damage on its surface, greater weight-loss rate and higher corrosion current density than STS 304.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.163-177
• /
• 2019

As inter-Korean relations progress, the issue of natural disasters which could directly affect the lives of the people in both Koreas, has not yet been discussed. Considering the current status of inter-Korean relations and the ongoing disaster-related damage in North Korea, it is imperative to establish a technical plan at the pan-governmental level to reduce the damage from natural disasters. The purpose of this study is to secure the Korea Peninsula against natural disasters by organizing South Korea's science and technologies related to natural disasters in order to reduce the damage, and to evaluate the applicability of said technologies. The situation of natural disasters in North Korea for 17 years has been summarized and reclassified based on eight types of natural disasters. Technologies related to natural disasters in South Korea were also investigated and reclassified. Based on the data, a priority evaluation was performed and the prioritization of technology application for each natural disaster type in North Korea was calculated through a quadrant analysis. As a result, the three major categories of high-priority technologies were classified as natural disaster monitoring with remote sensing and spatial information technology, construction of research basis and database based on geographic information system (GIS) and integrated management of complex natural disasters.

• 대한안전경영과학회지
• /
• 제24권4호
• /
• pp.125-134
• /
• 2022

Forest fires in Korea usually start in the fall and occur every year until spring. Most wildfires are human resources that combine topographical characteristics and carelessness, and failure to respond in the initial stage and lack of cleanup are spreading to large-scale wildfires. In order to prevent these wildfires, active cooperation from the public is essential. As can be seen from recent wildfires, the attention of the public is needed above all else because large-scale wildfires in Korea are occurring due to the people's negligence. If a wildfire spreads and becomes large, it causes damage to life and property, and the damage is irreversible. In this study, various methods were used to prevent forest fires and improve initial suppression ability. In order to minimize damage, the model analyzed by the 119 Special Rescue Team in Gangwon, Chungcheong and nearby forest fires was analyzed on the combustion progress and wind direction by time period. The propagation speed by the wind direction was simulated. Until now, most of the wildfires have been extinguished by firefighting, but I hope that the Forest Service will take the lead and maintain coordination with related organizations.

• 한국디지털건축인테리어학회논문집
• /
• 제4권2호
• /
• pp.44-51
• /
• 2004

It is generally known in seismic design that the beam yield type frames have more advantages than column yield type of which damage is likely to concentrate to any story. However we may design a building as a beam yield type, it becomes actually a column yield type collapse mode for slab floor diaphragm effect. Considering these points, the column yield type frames are selected and designed as the specimens. The object of this study is to grasp quantitatively the restoring force characteristic values and to estimate the seismic performances of column yield type steel rahmen.

• 한국가구학회지
• /
• 제26권3호
• /
• pp.274-285
• /
• 2015

Wood carving has been extremely widely practiced, but survives much less well than the other main materials, being vulnerable to decay, insect damage, and fire. It therefore forms an important hidden element in the art history of many cultures. Even though wood is less durable than either steel or stone, it has been used for a long time due to its usefulness. Wood has a lot of benefits. So people have used wood for materials in houses, trains, cars, bridges, and simple utilities in their ways according to their own religions, climates, and environment they are living in. Nowadays, there are wood products that are made up for its weaknesses and this has made wood be used in variety fields. Moreover, wood has been widely selected materials for sculptures, interior, and also for architecture thanks to its colors and textures. Wood has helped our life more abundant and beautiful.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.110-113
• /
• 2007

Modernity which is superficial phenomenon set off the mass scale for mass consumption and provide uniformly artificial environment. But natural destruction, environment pollution, resources exhaustion and so on has been caused by this and now ecology is threatened by destruction and damage beyond the limitation and human beings survival is even threatened. Accordingly furniture development for environment preservation considered environment problem is the urgent real situation. Recent paradigm is the concept of Eco-design which is the green design possible to live together in symbiosis, and new types of alternative furniture are needed in Korea as well. 'Furniture for disassembly' is presented as new method for alternative furniture.