• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.172-176
• /
• 1990

A high resolution picosecond absorption kinetic spectrometer utilizing dye emission and a streak camera is presented and compared with other methods of picosecond transient absorption measurements. Typical transient absorption and bleach recovery kinetics measured with this spectrometer are shown. Single wavelength transient absorption or ground state bleach recovery kinetics are determined on the basis of a single laser shot, so that the samples are relatively free frm decomposition by irradiation. Excellent kinetics may be obtained from the near UV to the near IR and are not subject to interference from luminescence of samples. The sensitivity of this spectrometer is very high and it is reasonably easy and convenient to set up and use.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1816-1823
• /
• 1992

In order to develop general CMAC training technique applicable to any CMAC, characteristics of CMAC learning algorithm and training problems of CMAC are studied. Neighborhood Sequential Training technique which is general and free fro CMAC learning interference is proposed. The technique is used to generate mathematical functions and found to be effective.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.95-100
• /
• 1993

본 연구에서는 볼 엔드밀을 사용한 5축 가공에서 공구 간섭회피를 위한 효율적인 알고리즘과 가공 가능한 많은 자세들 중에서 공구 절삭부위와 이전자세를 고려한 공구 자세설정 알고리즘을 개발 하였다. 공구 간섭검사는 공구 밑면 간섭과 몸체 간섭으로 나누어 순차적으로 수행하고, 공구 몸채 간섭이 없는 공구 자세를 설정한다. 공구 몸체 간섭검사는 곡면의 다각형 모델과 공구 축과의 관계를 사용하여 행한다. 간섭이 발생하였을 경우 간섭회피 및 자세조정 영역으로 설정하고 유효한 공구자세의 범위를 정한 후, 이 범위 내에서 공구 절삭 부위 및 이전 자세를 고려한 효율적 공구자세를 사용하여 공구경로를 산출하였으며, 시뮬레이터를 통해 그 유효성을 검증하였다.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• Ocean Science Journal
• /
• v.41 no.3
• /
• pp.163-173
• /
• 2006

A draconematid nematode species, Dracograllus filipjevi Allen and Noffsinger, 1978, is described from the washings of shallow littoral coralline algae at Guryongpo in the eastern coast of Korea. This species is recognized by the following characteristics: larger body size, number of posterior sublateral adhesion tubes (9 in male and 12-13 in female) and subventral adhesion tubes (8-9 in male and 9-10 in female), the absence of cephalic acanthiform setae on rostrum, the presence of longitudinally areolated body cuticle with dot-like punctations, the presence of some cuticular collar in swollen pharyngeal region, the shape of amphidial fovea (large, elongate, and loop-shaped in both sexes), the absence of preanal corniform setae, and the absence of lateral differentiation on narrow body region. Morphological features of the species using differential interference contrast photomicrographs are described in detail in the present work. The is the first report of D. filipjevi in Korea.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.299-308
• /
• 1992

Determining tool-approach directions is an important issue when an effort is made to transfer CAD data into manufacturing automatically. An algorithm is developed to determine whether a given part can be machined on a three-axis milling machine. lf a set of feasible tool-approach directions exists for a sculptured surface, the NC tool path and G-codes for machining the surface on a three-axis milling machine can be generated automatically by an NC tool path generation algorithm. The algorithm can be used for orientation and fixturing of the workpiece for interference free machining. The algorithm can also be applied to checking the translational separability of polyhedral parts in automatic assembly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.41-42
• /
• 2002

The powered missiles with very high thrust level can make highly underexpanded jet plume downstream of tile exhaust nozzle exit so that strong interactions between the exhaust plume and a free stream occur around the body at transonic or supersonic speeds. The interactions result in extremely complicated flow phenomena, which consist of plume-induced boundary layer separation, strong shear layers, various shock waves, and interactions among these. The flow characteristics are inherent nonlinear and severe unstable during the flight at its normal speed as well as taking-off and landing. Eventually, the induced boundary layer separation and pitching and yawing moments by the interactions cause undesirable effects ell the static stability and control of a missile.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.160-164
• /
• 2008

무선 시스템에서는 수신도 송신처럼 에너지를 소모한다. 이러한 전력소모는 배터리를 전원으로 오랜시간 동작해야하는 센서 망에서는 치명적이다. 특히 센서 네트워크를 위해 제안된 경쟁기반 방식의 MAC은 에너지 소모를 야기하는 패킷간의 충돌을 최소화 하고 전송지연을 줄이는 프로토콜이 필요하다. 본 논문에서는 adaptive S-MAC의 방식을 그대로 사용하면서 간섭에 의한 충돌을 줄이는 알고리즘을 이용하여 한 sync interval 내에서 최대 3홉까지 전송 가능한 MAC 프로토콜을 제안하였다. NS2의 시뮬레이션을 통해 제안한 MAC 프로토콜의 성능을 기존 MAC과 비교하여 증명하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.246-252
• /
• 2004

Presented in this Paper is a Micro Machining Service .(MIMS) based on the World Wide Web technologies. In order to ensure easy access to the service, the web browsers are used as the user interface. The pan geometry as an STL file is uploaded with process parameter for 3-axis CNC milling. Depending on the predefined user level, novice or expert, the user interface requires different parameters for process planning. An STL-based CAM resides in the server and automatically provides NC codes upon user's request. Tool-paths for scanning and pencil-cut, which are interference-free and precise, are created by the curve-based polyhedral machining method. A couple of sample parts were fabricated by a micro endmill with 127 fm diameter. From the tests, the parts fabricated by scanning followed by pencil-cut resulted in less error(within 2%) than the parts machined only by scanning tool-path.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.47-54
• /
• 1991

본 논문에서는 전자파 해석에 관련된 기존의 해석 기법들을 간략하게 비교, 검토하고 GTD / UTD를 기본으로하여 고주파 해석 기법에 관련된 몇가지 문제들을 다룬다. 전자파 해석이란 전자파의 복사(radiation), 산란(scattering) 및 결합(coupling)에 관련된 문제의 해석을의미 한다. 전자파 해석은 여러 목적을위해 응용되고 있으며 EMC / EMI문제의 분석 및 대책 수립에도 응용될 수 있다. EMC / EMI 문제의 근원은 전자파의 간섭(interference) 현상이다. Emitting source로부터 복사(radiation)되는 간섭파는 여러 경로를 통해서 receptor로 coupling된다. 일반적으로 emitter와 receptor사이에는 여러 복잡한 구조물이 산란체로 작용하고 있으므로, emitter와 receptor사이의 직접경로(direct path)를 통한 coupling과 함께 구조물에 의한 전자파의 반사 및 회절을 통한 간접경로(indirect path)의 coupling도 고려되어야 한다. 따라서 EMC / EMI문제는 자유공간(free space)상에 있는 antenna 사이의 송수신 문제보다 매우 복잡하고 정확한 couplin의 계 산에 적지않은 어려움이 있다. EMC / EMI대책수립은 일차적으로 coupling path의 차단을 통해서 가능하므로 전자 파의 coupling path의 분석과 전자파의 복사 및 산란 mechanism에 대한 해석이 필수적이다.