• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.291-294
• /
• 2000

Free-form surfaces arise in shipbuilding, automotive and aerospace industries. Specially compound free-form surfaces so do. Machining complicated products consist of compound surface, it is very important to avold and remove tool interferences. By the way, in compound surfaces the tool interference can occur not only in the tool path direction but also in the other direction. A new tool interference detection and correction using tool interference conditions is suggested to identify and correct the tool interference in compound surfaces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1832-1843
• /
• 1995

Tool interference is one of the most critical problems in sculptured surface machining. When machining cavities and concaves, the tool frequently overcuts the portions of the surface, which cause inaccuracy in machining. So tool interference-free paths must be generated for rough cutting more efficiently. In this paper a software using SSI(Surface/Surface intersection) algorithm is developed for eliminating tool interference which occurs in an offset surface in 3-dimensional free form surface modeling. this work consists of two stages : using the offset data, the intersection curves are rapidly checked by this algorithm at the first stage. CL(cutter location) data are obtained by deleting the loop section of intersected offset patches at the second stage. This algorithm can reduce the amount of memory required to store machining data and also easily check region which have the possibility of intersection. Also, This software is verified to be useful in machining a curved object on a DNC milling machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.146-153
• /
• 1998

NC machines with 4 or 5 axes are capable of various tool approach motions, which makes interference-free and high machinablity machining possible. This paper deals with how to integrate these two advantages (interference-free and high machinability machining) in multi-axes NC machining with a ball-end mill. Feasible tool approach region at a point on a surface is first computed, then among which an approach direction is determined so as to minimize the cutting force required. Tool and spindle volumes are considered in computing the feasible tool approach region, and the computing time is improved by trans-forming surface patches into minimal enclosing spheres. A cutting force prediction model is used for estimating the cutting force. The algorithm is developed so as to be applied to 4- or 5-axes NC machining in common.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1238-1259
• /
• 2019

Saving energy is a big challenge for Wireless Sensor Networks (WSNs), which becomes even more critical in large-scale WSNs. Most energy waste is communication related, such as collision, overhearing and idle listening, so the schedule-based access which can avoid these wastes is preferred for WSNs. On the other hand, clustering technique is considered as the most promising solution for topology management in WSNs. Hence, providing interference-free clustering is vital for WSNs, especially for large-scale WSNs. However, schedule management in cluster-based networks is never a trivial work, since it requires inter-cluster cooperation. In this paper, we propose a clustering method, called Interference-Free Clustering Protocol (IFCP), to partition a WSN into interference-free clusters, making timeslot management much easier to achieve. Moreover, we model the clustering problem as a multi-objective optimization issue and use non-dominated sorting genetic algorithm II to solve it. Our proposal is finally compared with two adaptive clustering methods, HEED-CSMA and HEED-BMA, demonstrating that it achieves the good performance in terms of delay, packet delivery ratio, and energy consumption.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.101-105
• /
• 1993

When machining a die cavity, many machining conditions must be considered. Especially when using a NC machine, The tool interference is a improtant problem. In this paper, we consider the tool interference of free-formed surfaces and analytic compound surfaces which having free_formed base and many primitives and present a method checking the tool interference regions and avoiding them

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.2
• /
• pp.110-120
• /
• 1999

In general, turbine blades are usually machined on 5-axis NC machine. The 5-axis machining of sculptured surface offers many advantages over 3-axis machining including the faster material-removal rates and an improved surface finish. But it is difficult and time-consuming to generated interference-free 5-axis tool path. This paper describes research on the algorithm for generation of an interference-free 5-axis NC data for machining turbine blades. The approach, using the section profile derived from the intersection of cutting planes with a triangulated-surface approximation, includes (1) CL-data generation by detecting an interference-free heel angle (2) the calculation method for finding a adaptive feed-rate value, and (3) the inverse kinematics depending on the structure of 5-axis machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.108-115
• /
• 1997

In this paper, an algorithm of computing interference-free tool approach directions(visibility cone) with consideration of tool volume at an arbitrary point of a sculptured surface is developed. The surface is first approximated into a polyhedron with smaller subpatches and the tool approach directions are evenly sampled so as to test accessibility. Then the visibility cone is computed by testing if each approach direction is interfered by other surface subpatches. The results are represented as the binary spherical map which transform geometric information on sphere into aogebraic one. The developed algorithm is implemented and tested by several sculptured surfaces, convincing it can be easily used as a tool for not only interference- free tool approach directions but also determining process planning of multi-axis NC machining of sculp- tured surfaces

• Korean Journal of Weed Science
• /
• v.32 no.1
• /
• pp.17-24
• /
• 2012

The study was conducted to investigate the effect of weed interference and starter fertilizer on subsequent soybean seed quality at the Agricultural Research Farm and Laboratory of Razi University, Kermanshah, Iran. Two factorial experiment was laid-outon a randomized complete block design with four replications. First factor was starter fertilizer levels (0 and 25 kg $ha^{-1}$) applied in the forms of monoammonium phosphate, the second factor was different weed interference periods consisted of five initial weed-free periods (in which, plots were kept free of weeds for 0, 15, 30, 45 and 60 days after crop emergence (DAE) and then weeds were allowed to grow until harvest) and five initial weed-infested periods (in which, weeds were allowed to grow for 0, 15, 30, 45 and 60DAE, after which the plots were kept free of weeds until harvest). Full season weedy condition reduced 100-seed weight, seed germination percentage and seedling dry weight by 25.9, 13.3 and 22.5%, respectively and increased mean germination time and seed electrical conductivity by 55.8 and 24.3%, respectively as compared with full season weed-free control. However, the traits under study were not significantly influenced when field was kept free of weeds for at least 45 DAE (R1) or weedy condition was continued for less than 30 DAE (V8). There was a significant and negative correlation between weed biomass and seed weight (r = -0.93), so that when weed free condition was less than 45 DAE or weed infested period was continued for at least 30 DAE, soybean plants produced wrinkled and underdeveloped seeds with lower weights and qualities. Moreover, soybean seed quality reduction due to weed interference was more evident when starter fertilizer was applied and weeds interfered with soybean from the beginning of the growing season. Information from the present study is beneficial in soybean seed production systems and where farmers use the harvested seeds for the following planting.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.269-286
• /
• 2011

In this paper, we study a problem that is concerning how to construct a delay-constrained multicast tree on a wireless mesh network (WMN) such that the number of serviced clients is maximized. In order to support high-quality and concurrent interference-free transmission streams, multiple radios are implemented in each mesh node in the WMNs. Instead of only orthogonal channels used for the multicast in the previous works, both orthogonal and partially overlapping channels are considered in this study. As a result, the number of links successfully allocated channels can be expected to be much larger than that of the approaches in which only orthogonal channels are considered. The number of serviced subscribers is then increased dramatically. Hence, the goal of this study is to find interference-free and delay-constrained multicast trees that can lead to the maximal number of serviced subscribers. This problem is referred as the MRDCM problem. Two heuristics, load-based greedy algorithm and load-based MCM algorithm, are developed for constructing multicast trees. Furthermore, two load-based channel assignment procedures are provided to allocate interference-free channels to the multicast trees. A set of experiments is designed to do performance, delay and efficiency comparisons for the multicast trees generated by all the approximation algorithms proposed in this study.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.253-259
• /
• 2016

The typical method for performing an absolute radiometric calibration of a Synthetic Aperture Radar (SAR) System is to analyze its response, without interference, to a target with a known Radar Cross Section (RCS). To minimize interference, an error-free calibration site for a Corner Reflector (CR) is required on a wide and flat plain or on an area without disturbance sources (such as ground objects). However, in reality, due to expense and lack of availability for long periods, it is difficult to identify such a site. An alternative solution is the use of a Triangular Trihedral Corner Reflector (TTCR) site, with a surrounding protection wall consisting of berms and a hollow. It is possible in this scenario, to create the minimum criteria for an effectively error-free site involving a conventional object-tip reflection applied to all beams. Sidelobe interference by the berm is considered to be the major disturbance factor. Total interference, including an object-tip reflection and a sidelobe interference, is analyzed experimentally with SAR images. The results provide a new guideline for the minimum criteria of TTCR site design that require, at least, the removal of all ground objects within the fifth sidelobe.