• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.701-705
• /
• 1998

The objective of this study is to develop the practical program which can check the constructible possibility of prestressed concrete box girder bridges for design. Checking constructible possibility is defined as checking the interference of each elements in a PSC box girder bridge and computing the distances of each elements. To check the constructible possibility of a PSC box girder bride, bridge must be modelled using solid in three dimension. By using a 3 dimensional solid modeling system, engineers can get the photo realistic 3D viewing images of the bridge and produce FEM analytic model of it. Users can manipulate their drawings easier and take off quantity of the whole structure and its elements as well as check the constructible possibility of their PSC box girder bridges.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.400-409
• /
• 2012

It is not easy to know the accurate mass and mass moment of inertia of robot. Because of this uncertainty, error may exist when we control the robot based on the inaccurate mass information. Moreover the properties of the portable robot can change during its operation. Therefore we developed the motion simulator based on the adaptive control. First, the computed torque control was carried out in order to minimize an error between target angles and real angles. The computed torque control is based on the equation of robot motion, which is derived from the Lagrange-Euler equation. To minimize the error between the real model and the approximated model, the adaptive control was carried out. During this simulation, the interference check was also carried out. The interference check verifies that the robot can move successfully without any collision.

• 방송공학회논문지
• /
• 제18권3호
• /
• pp.445-454
• /
• 2013

ITU-R 권고 P.1546의 전파전파 예측, 지리정보시스템, 신호-간섭(S-I) 평면에 기반하여 최소커플링손실을 적용한 무선시스템 간의 간섭분석 방법을 제시하며, 또한 임의의 안테나 패턴에 대해 간섭원과 피해 수신기 간의 방위각 및 앙각을 산출하는 국부좌표계를 도출하였다. 제시된 알고리즘의 확인을 위해 지도상의 면적 $80{\times}60[km^2]$ 갖는 실제 육지-바다 혼합지역의 지리정보를 취하였다. 가정한 주파수에 대해 지도상에 위치한 고정무선시스템 및 레이더의 전계강도와 경로윤곽 및 최대허용간섭레벨을 갖는 보호비를 산출하였으며, 간섭원의 방위각 및 앙각의 변화에 대해 피해 수신기의 간섭전력을 계산하였다. VHF 및 UHF 대역에서 개발된 간섭분석 방법론은 상용 또는 군용 무선시스템 간의 상호 운용성 및 양립성 평가에 실제로 적용될 수 있을 것으로 여겨진다.

• Tribology and Lubricants
• /
• 제22권6호
• /
• pp.329-334
• /
• 2006

In CNG (Compressed natural gas) fuel supply line, whose main components are receptacle and check valve are used to charge high pressure gas to the tank of NGV (Natural gas vehicle). It is reported that the seal is separated occasionally form valve seat and results in blockage of gas flow. In this paper, MARC is used to investigate the reasons of seal separation and suggest design improvements. The static gas pressure distributions acting on the seal which calculated using FLUENT are considered to investigate accurate seal deformation behaviors. Deformed seal shapes are obtained for various amounts of seal interference and its location, gas pressure distributions and Young's modulus of the rubber used. The results showed that the reasons of seal separation problems are verified theoretically, and suggested examples of new design method. Therefore the present numerical methods can be applied in designing and performance analysis of rubber seals adopted in high pressure fluid machineries.

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.135-141
• /
• 2013

지하철은 한국에서 가장 많이 이용하는 대중교통으로 수도권에만 하루 유동인구가 일 천만명에 달하는 무선 통신의 HOT SOPT 이라고 볼 수 있다. 여기에는 3개 통신 사업자의 2G/3G/4G/Wi-Fi/T-DMB의 수많은 주파수와 서비스가 공존해 있으며, 지하철 승객과 전철의 통신운용관리를 위한 지하철 자가망도 공존해 있어, 지하철 승객의 안전과 운행을 위하여 이에 대한 상호간의 전파간섭의 영향여부의 검증이 필요하였다. 본 연구와 시험은 서로 다른 주파수/통신 서비스 간의 전파 간섭여부를 확인하는 방법과 시험을 통하여, 지하철 기관과 이동통신사업자는 각 주파수별의 상호영향 간섭이 없음을 확인하고 지하철 승객에게 안전하고 고품질의 통신서비스를 할 수 있는 검증의 자료로써 확인할 수 있었다. 이러한 검증방법은 지하철 공간에서 뿐만이 아닌 어느 지역에서의 상호간섭여부를 확인할 수 있는 일반적인 검증방법으로 적용이 가능하다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.369-374
• /
• 2001

Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers big power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shaped curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, it is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. This paper describes a mathematical model of profile shifted involute gear. and this model is based on Camus's theory. We draw three dimensions gear have accurate mathematical function using ADS, VisualLISP. and To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.1954-1971
• /
• 2017

In this work, first, a multiuser detection (MUD) algorithm based on component-level soft interference cancellation and linear minimum mean square error (CLSIC-LMMSE) is proposed, which can enhance the bit error ratio (BER) performance of the traditional SIC-LMMSE-based MUD by mitigating error propagation. Second, for non-binary low density parity check (NB-LDPC) coded high-order modulation systems, when the proposed algorithm is integrated with partial mapping, the receiver with iterative detection and decoding (IDD) achieves not only better BER performance but also significantly computational complexity reduction over the traditional SIC-LMMSE-based IDD scheme. Extrinsic information transfer chart (EXIT) analysis and numerical simulations are both used to support the conclusions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1008-1012
• /
• 1997

This study is on a mathematical model of profile shifted involute gear, and this model is based on Camus's theory. Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers bit power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shape curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. So we draw three dimensions gear have accurate mathematical function using ADS(Automatic Drawing system), VisualLISP. To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.

• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.79-85
• /
• 2023

본 논문에서는 S-Band PSR(Primary surveillance radar) 레이더들이 가까운 거리에 인접하여 운영하는 경우에 상호 간의 주파수 간섭을 최소화함으로서 정상적으로 운영하기 위한 방안을 연구하였다. PSR 레이더 간의 전파 간섭이 발생되었을 때의 레이더 수신기에서 나타나는 현상을 분석하고, 이에 대한 대응으로 적절한 S-Band 대역통과필터를 선정하여 활용하였다. 필터 적용 전후의 레이더 RF 수신 특성을 비교 분석하여, 대역 통과 필터의 간섭전파의 억제 성능을 확인하였다. 레이더 수신기에 대역통과 필터 추가 설치 시 6.4~7.7 dB의 통과대역 감쇠가 발생하는데 이로 인한 레이더 탐지 성능 저하가 발생하는지 여부는 PSR 탐지율을 비교 분석함으로서 본 연구의 유용성을 검증하였다.