• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.7-13
• /
• 2008

Several high resolution schemes such as OSHER, MUSCL, SMART, GAMMA, WACEB and CUBISTA are comparatively studied with respect to the accurate capturing of fluid interfaces throughout the application to two typical test cases of a translation test and a collapsing water column problem with a return wave. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method and an interface capturing method, which is based on the finite-volume technique and fully conservative. The calculated results show that SMART scheme gives the best performance with respect to accuracy and robustness.

• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.23-29
• /
• 2008

Two high resolution compressive schemes, CICSAM(Ubbink, 1997) and HRIC(Muzaferija & Peric, 1999), in interface capturing method are reviewed briefly with respect to the extended forms suitable for unstructured meshes. And then those are applied to three typical test cases of translation test, shearing flow test and collapsing water problem with an obstacle. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method, which is based on the finite-volume technique and fully conservative. The calculated results show that CICSAM is better than HRIC with respect to accuracy and robustness, although either scheme can be used as a good choice for free surface or two-phase flow simulation.

• ETRI Journal
• /
• 제25권1호
• /
• pp.25-33
• /
• 2003

This paper describes interactive dynamic simulation schemes for articulated bodies in virtual environments, where user interaction is allowed through a haptic interface. We incorporated these schemes into our dynamic simulator I-GMS, which was developed in an object-oriented framework for simulating motions of free bodies and complex linkages, such as those needed for robotic systems or human body simulation. User interaction is achieved by performing push and pull operations with the PHANToM haptic device, which runs as an integrated part of I-GMS. We use both forward and inverse dynamics of articulated bodies for the haptic interaction by the push and pull operations, respectively. We demonstrate the user-interaction capability of I-GMS through on-line editing of trajectories for 6-dof (degrees of freedom) articulated bodies.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.51-56
• /
• 2006

Several high resolution schemes such as OSHER, MUSCL, SMART, GAMMA, WACEB and CUBISTA are applied to two typical test cases of a translation test and a collapsing water column problem for the accurate capturing of fluid interfaces. It is accomplished by implementing the high resolution schemes in the in-house CFD code(PowerCFD) for computing 3-D flow with an unstructured cell-centered method, which is based on the finite-volume technique and fully conservative. The calculated results are found to show that SMART scheme gives the best performance with respect to accuracy and robustness.

• ETRI Journal
• /
• 제27권1호
• /
• pp.81-88
• /
• 2005

In this paper, interface circuits that are suitable for point-to-point interconnection with an over 1 Gbps data rate per pin are proposed. To achieve a successful data transfer rate of multi-gigabits per-second between two chips with a point-to-point interconnection, the input receiver uses an on-chip parallel terminator of the pass gate style, while the output driver uses the pullup and pulldown transistors of the diode-connected style. In addition, the novel dynamic voltage level converter (DVLC) has solved such problems as the access time increase and valid data window reduction. These schemes were adopted on a 64 Mb DDR SRAM with a 1.5 Gbps data rate per pin and fabricated using a 0.10 ${\mu}m$ dual gate oxide CMOS technology.

• Structural Engineering and Mechanics
• /
• 제6권7호
• /
• pp.801-815
• /
• 1998

An overview of an analytical model to predict mortar joint failure in unreinforced masonry (URM) structures is presented. The validity of the model is established by comparison with experimental results at element level as well as structure level. This model is then used to study the behavior of URM walls and two commonly used retrofitting schemes. Finally, effectiveness of the two retrofitting schemes in increasing strength and stiffness of existing URM walls is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.163-165
• /
• 2008

In this paper we compare performance of exponential effective SINR mapping (EESM) with traditional actual value interface (AVI) approach for various modulation and coding schemes (MCS) in terms of coded bit error rate (BER) or block error rate (BLER) using different transmission schemes. This paper provides explanation and comparison of the two algorithms for single input single output (SISO), and single input multi-output (SIMO, 1X2) in OFDM systems. We calibrate the value of beta ($\beta$) in EESM using large number of channel realizations, here $\beta$ is a calibration constant. This paper also presents importance of beta value in EESM and how it improves the performance of OFDM wireless systems. We propose different modulation and coding schemes. Here we consider Standford university interim (SUI) channel models. Furthermore this paper also shows the detail observation of the two algorithms. Finally the conclusion review given for short summary.

• 정보처리학회논문지C
• /
• 제16C권3호
• /
• pp.383-392
• /
• 2009

차세대 네트워크(NGN)는 QoS가 지원되는 광 대역 전달 망에서 세션 및 비-세션 서비스를 지원하기 위한 패킷 기반의 융합 망이다. NGN에서 네트워크 사용자에 따라 차별화된 서비스를 제공하기 위해서는 QoS 기반 자원제어가 이루어져 한다. 본 논문에서는 세션 및 자원제어 지연을 최소화하기 위하여 NGN 자원제어 인터페이스에 병행형 제어 스킴을 정의하였다. 시뮬레이션을 통하여 기존 및 제안된 NGN 제어 스킴들의 제어지연과 완료율을 측정 및 분석하였다. 두 단계 자원 제어에서 도착율 120 까지는 병행형과 순차형의 완료율이 100%를 달성하였으며, 병행형의 제어지연이 순차형에 비하여 약 21.5% 개선되었음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1602-1605
• /
• 2002

Communication schemes are currently changing from circuit switched towards packet switched. These changes enable access to Internet and multimedia services in wireless network. Provision of real-time IP services in air interface introduces relatively large overhead in RTP/UDP/IP headers. To reduce the overhead, the header compression schemes are required. There exist two header compression schemes (CRTP, ROHC) which are IETF standards. We propose Context-ID detection method which reduces more efficiently the packet loss rate than two existing schemes. Its performance in WCDMA system environment is evaluated for CRTP and ROHC schemes.

• ETRI Journal
• /
• 제18권4호
• /
• pp.229-244
• /
• 1997

Realization of the economical, reliable, and efficient ATM interface block becomes an important key to development of the ATM switching system when we consider new issues raised recently. In this paper, we summarize requirements for the ATM interface block and present the UNI (User Network Interface)/NNI (Network Node Interface) architecture to meet these requirements. We also evaluate the performance of the multiplexer adopting the various multiplexing schemes and service disciplines. For ATM UNI/NNI interface technologies, we have developed a new policing device using the priority encoding scheme. It can reduce the decision time for policing significantly. We have also designed a new spacer that can space out the clumped cell stream almost perfectly. This algorithm guarantees more than 99 % conformance to the negotiated peak cell rate. Finally, we propose the interface architecture for accommodation of the ABR (Available Bit Rate) transfer capability. The proposed structure that performs virtual source and virtual destination functions as well as a switch algorithm can efficiently accommodate the ABR service.