• Earthquakes and Structures
• /
• 제17권4호
• /
• pp.411-424
• /
• 2019

In this study, a numerical model of a shield tunnel with an assembled segmental lining was built. The seismic response of the segmental lining of the section of the shield tunnel in Line 1 of the Chengdu Metro is analyzed as it passes through the interface of sand-cobble and mudstone layers. To do so, the node-stress seismic-motion input method was used to input the seismic motion measured during the 2008 Wenchuan earthquake, and the joint openings and dislocations associated with the earthquake action were obtained. With reference to the Ethylene-Propylene-Diene Monomer (EPDM) sealing gaskets used in the shield tunnels in the Chengdu Metro, numerical simulation was applied to analyze the contact pressure along the seepage paths and the waterproof property under different joint openings and dislocations. A laboratory test on the elastic sealing gasket was also conducted to study its waterproof property. The test results accord well with the numerical results and the occurrence of water seepage in the section of the shield tunnel in Line 1 of the Chengdu Metro during the 2008 Wenchuan earthquake was verified. These research results demonstrate the deformation of segmental joint under earthquake, also demonstrate the relationship between segmental joint deformation and waterproof property.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2006년도 동계학술연구발표회 및 자성 스핀트로닉스 국제학술대회
• /
• pp.62-63
• /
• 2006

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.13-18
• /
• 2010

The composite stock cutting problem is defined as allocating rectangular and irregular patterns onto a large composite stock sheet of finite dimensions in such a way that the resulting scrap will be minimized. In this paper, we introduce a novel approach to hybrid optimization algorithm called MGA in MPI (Message Passing Interface) environments. The proposed MGA combines the benefit of rapid convergence property of Mean Field Annealing and the effective genetic operations. This paper also proposes the efficient data structures for pattern related information.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1279-1284
• /
• 2000

This study introduces a simulation model of radar responses with frequencies on subsurface voids in concrete. In this model, the resolution and the attenuation according to radar frequencies in each interface which has different electromagnetic property are analyzed. This model aims to select the best frequency of radar which can analyze the thickness of voids in concrete from radar response. It also can be applied to estimate the limitation of propagation depth of radar on subsurface voids in concrete. The computed results show the radar images based on radar signal processing using convolution technique.

• 접착 및 계면
• /
• 제16권4호
• /
• pp.137-145
• /
• 2015

본 연구에서는 현재 문화재 보존 처리에 사용되고 있는 합성수지를 대체하여 금속, 목재, 도자기, 토기, 석재 유물 등 재질별 문화재 복원 작업에 활용할 수 있는 다목적용 접합, 복원재료인 에폭시 퍼티(epoxy putty)를 개발하고자 하였다. 기존에 사용되고 있는 합성수지는 높은 강도로 인한 절삭력의 문제, 긴 경화 시간으로 인한 처짐 현상, 도구나 장갑에 묻어 유물의 표면을 오염시키는 현상, 재료의 황변 현상으로 인한 재처리 등의 문제점을 보이고 있다. 이를 해결하기 위해, 1차적으로 문화재 보존 처리 현장에서 가장 많이 사용되고 있는 페이스트(paste)형태의 복원 재료를 선정하여 물성을 파악한 후 이를 비교 대상으로 선택하고, 주제 및 경화제와 충전제의 종류에 따른 에폭시 퍼티를 개발하였다. 개발된 에폭시 퍼티는 기존 재료의 문제점 해결 및 유사한 물성을 지니기 위해 성상(性狀)이 다른 주제와 경화제를 각각 선정하여 물성 실험을 실시하였다. 연구 결과 2종 모두 페이스트 형태로 경화 시간은 5~10 min 내외로 기존 재료에 비해 약 3~10배 정도 짧아 작업의 편리성과 처짐 현상을 개선하였으며, 절삭력을 높이기 위한 마모율은 약 3배 정도 향상시켜 쉽게 성형할 수 있도록 하였다. 또한 작업 중 발생하는 표면 오염 등의 단점을 보완하기 위해 충전제로 탈크(talc)와 백색의 micro-balloon을 첨가하여 사용 중 손에 묻어 나와 끈적거리는 현상을 줄여주었을 뿐만 아니라 컬러링(coloring), 경량성, 절삭력 등이 높은 저수축, 저황변, 절삭력이 우수한 다목적 복원 재료를 개발하였다.

• 접착 및 계면
• /
• 제11권1호
• /
• pp.26-34
• /
• 2010

가열에 의해 해체가 가능한 열적특성을 갖는 폴리우레탄 접착제를 합성하였으며 열팽창비드를 혼합하여 해체성 접착제를 제조하였다. Dynamic mechanical thermal analyzer (DMA)를 사용하여 폴리우레탄의 열적특성을 확인하였고 접착강도와 열팽창비드의 함량, 가열 trigger의 종류와 처리조건에 따른 해체특성을 연구하였다. 열풍과 microwave 처리에 의해서 해체성 폴리우레탄 접착제의 부피팽창에 따른 접착된 시편의 해체가 가능하였으며, 열팽창비드의 함량이 증가될수록 접착된 피착재가 더 쉽게 분리되었다. 해체성 접착제에서 접착력과 해체특성 모두를 만족시킬 수 있는 가장 적합한 열팽창비드 사용량은 40%이였으며, 가열 trigger로 열풍을 사용한 경우에는 $160^{\circ}C$, 30 min의 조건에서, 가열 trigger로 microwave를 사용한 경우에는 조사시간 4 min의 조건에서 접착되어 있는 피착재가 완전히 해체되었다.

• 접착 및 계면
• /
• 제6권2호
• /
• pp.6-12
• /
• 2005

플라즈마는 고체, 액체, 기체와 더불어 제 4의 물질상태로 불리어지고 있는데, 기체의 일부가 전리된 가스상태이며 외부기장에 영향을 받고 전기를 통과시키면 발광하는 에너지가 높은 기체의 영역으로 정의된다. 인위적으로 에너지를 가하여 플라즈마를 발생시켜 많은 부분에서 새로운 첨단 연구가 활발하게 이루어지고 있으며, 많은 부분들이 우리의 생활에 들어와 있다. 플라즈마를 이용하여 고분자물의 표면을 처리하게 되면 몇 가지 장점이 있다. 먼저 플라즈마는 표면의 물성만을 변화시켜 고분자 본 물성을 유지시켜주고, 유기용제를 사용하지 않으며, 공정 운행 중 발생하는 폐기물이 없어 환경친화적이며, 상압 플라즈마의 경우 자동화 연속공정이 가능하다. 본 실험에서는 신발소재 고분자 재료의 상호 접착능력을 향상시키기 위하여 플라즈마를 사용하여 표면 개질을 시도하였고, 처리 시간과 사용한 가스의 유량에 따른 박리강도 시험을 통하여 접착력 향상을 확인하였고, 접촉각 측정과 SEM 측정을 통하여 고분자 표면 변화를 확인하였다.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.32-38
• /
• 2006

A series of organic-inorganic hybrids, PCL/EP/$SiO_2$, involving epoxy resin and triethoxysilane-terminated polycaprolactone elastomer (PCL-TESi) were prepared via polymerization of diglycidyl ether of bisphenol A (DGEBA) with amine curing agent KB-2 and sol-gel process of PCL-TESi. The curing reactions were started from the initially homogeneous mixture of DGEBA, KB-2 and the PCL-TESi. The organicinorganic hybrids containing up to 4.95% (wt) of $SiO_2$ were obtained and characterized by FT-IR, transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). It was experimentally shown that the swelling property in toluene, morphologies and thermal properties of the resulting hybrids were quite dependent on the contents of $SiO_2$. The crosslink network density decreases with increasing of the PCL-TESi. And in TEM, the phase separated morphology of these hybrids was found, which resulted from the coagulation of Si-O-Si networks resulting from $-Si(OC_2H_5)_3$ of PCL-TESi self-curing by hydrolytic silanol condensation, with the advancement of the curing reaction in the modified epoxy resin systems. Meanwhile, the change of the $SiO_2$ content made the morphologies changed from aggregated particles of Si-O-Si in the hybrid to nanocluster of interconnected Si-O-Si particles, then to aggregated Si-O-Si dispersing in the continuous cured epoxy phase again, and last to co-continuous interpenetrating network. The glass transition behavior of the hybrid material was cooperative motion of large chain segments, which were hindered by the inorganic Si-O-Si network. And in TG analysis, the characteristic temperature at 5% of weight loss was evidently increased from $120.5^{\circ}C$ of pure cured epoxy to $277.6^{\circ}C$ of 3.84% (wt) of $SiO_2$ modified epoxy due to the existence of Si-O-Si when PCL-TESi was added in the hybrid.

• 산업기술연구
• /
• 제24권A호
• /
• pp.227-238
• /
• 2004

This paper is results of experimental and nunerical works on the behavior of the cut-and-cover tunnel. Centrifuge model tests were performed to simulate the behavior of the cut-and-cover tunnels having cross sections of national road and subway tunnels. Model experiments were carried out with changing the cut slope and the slope of filling ground surface. Displacements of tunnel lining resulted from artificially accelerated gravitational force up to 40g of covered material used in model tests, were measured during centrifuge model tests. In model tests, Jumunjin Standard Sand with the relative density of 80 % and the zinc plates were used for the covered material and the flexible tunnel lining, respectively. Basic soil property tests were performed to obtain it's the property of Jumumjin Standard Sand. Shear strength parameters of Jumunjin Standard Sand were obtained by performing the triaxial compression tests. Direct shear tests were also carried out to find the mechanical properties of the interface between the lining and the covered material. Numerical analysis with the commercially available program of FLAC were performed to compare with results of centrifuge model experiment In numerical modelling. Mohr-Coulomb elasto-plastic constitutive model was used to simulaye the behavoor of Jumunjin Standard Sand and the interface element between the lining and the covered material was implemented to simulate the interaction between them. Compared results between model tests and numerical estimation with respect to displacement of the lining showed in good agreements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.314-315
• /
• 2008

We have studied a property change of organic light-emitting diodes (OLED)s due to a surface reformation of indium-tin-oxide(ITO) substrate. An ITO is widely used as a transparent electrode in light-emitting diodes, and the OLEDs device performance is sensitive to the surface properties of the ITO. The ITO surface reformation could reduce the Schottky barrier at the ITO/organic interface and increase the adhesion of the organic layer onto the electrode. We have studied the characteristics of OLEDs with a treatment by a wet processing of the ITO substrate. The self-assembled monolayer(SAM) was used for wet processing. The characteristics of OLEDs were improved by SAM treatment of an ITO in this work. The OLEDs with a structure of ITO/TPD(50nm)/$Alq_3$(70nm)/LiF(0.5nm)/Al(100nm) were fabricated, and the surface properties of ITO were investigated by using seneral characterization techniques. Self-assembled monolayer introduced at the anode/organic interface gave an improvement in turn-on voltage, luminance and external quantum efficiency compared to the device without the SAM layer. SAM-treatment time of the ITO substrate was made to be 0/10/15/20/25min. The current efficiency of the device with 15min. treated SAM layer was increased by 3 times and the external quantum efficiency by 2.6 times.