• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1833-1836
• /
• 2008

Recently as the micro surface features become higher and diverse in their shapes, the releasing of the molded features becomes more crucial for manufacturing of the micro patterned products. The higher aspect ratio of the features or more complex shape of the features results in larger releasing force, elongation or cohesive failure of the features during the releasing. Another issue would be the uniformity of the released surface features after molding, especially for applications with large area surface. The micro patterned optical film, one of typical applications for micro surface features, consists of two layers, the thermoplastic base film and the micro formed UV resin layer. Therefore two interfaces are typically involved during the forming of this micro featured film; one is between the base film and the UV resin and another is between the resin and the pattern master. To improve the releasing of the molded surface features, the adhesive characteristic was investigated at these two interfaces. A PET film was used as a base film and two UV curable resins with different surface energy were prepared for different adhesiveness. Also the two different pattern masters were employed; one is made from brass-copper alloy and fabricated with PMMA. The adhesiveness at each interface was measured for some combinations of these base film, UV resins and the masters and the effect of this adhesiveness on the releasing was investigated.

• 대한소아치과학회지
• /
• 제34권3호
• /
• pp.420-429
• /
• 2007

전통적인 3단계 total-etching 시스템인 제 4세대 상아질 접착제로부터 술식의 단순화를 이루며 진화한 제 5, 6세대 및 최근에 소개된 제 7세대 상아질 접착제를 상아질 표면처리방식과 적용단계별로 구분하여 bovine teeth 상아질에 대한 미세인장결합강도를 측정하여 그 효용성을 비교 평가하였다. Bovine incisor의 상아질 표면을 노출시키고, 적절한 표면처리 후 제조사의 지시에 따라 5종의 상아질 접착제; 제 4 세대로 Scotch $Bond^{TM}$ Multipurpose(3M ESPE, USA), $Adper^{TM}$ Single Bond 2(3M ESPE, USA), 제 5세대 $Clearfil^{(R)}$ SE Bond(KURARAY, JAPAN), 제 6세대 AQ $Bond^{TM}$(SUN MEDICAL, JAPAN), 제 7세대 $Clearfil^{(R)}$ tri-S Bond(KURARAY, JAPAN)를 각각 적용하여 미세인장결합강도를 측정하고 접착계면의 파절양상을 관찰하였다. 연구결과 미세인장결합강도는 $Clearfil^{(R)}$ SE Bond군에서 가장 높았으며 다음으로 Scotch $Bond^{TM}$ Multipurpose군, $Adper^{TM}$ Single Bond 2군, AQ $Bond^{TM}$군, $Clearfil^{(R)}$ tri-S Bond군의 순으로 나타났다. 계면의 파절양상은 상대적으로 미세인장강도가 높게 나타난 Scotch $Bond^{TM}$ Multipurpose, $Adper^{TM}$ Single Bond2, $Clearfil^{(R)}$ SE Bond군은 레진의 응집성 파절이 많이 발생하였고 상대적으로 미세인장강도가 낮은 AQ $Bond^{TM}$, $Clearfil^{(R)}$ tri-S Bond 군의 경우에는 대부분 접착성 파절이 관찰되었다. 이상의 결과를 종합하면 상아질 접착제의 미세인장결합강도는 각 접착시스템별로 다소의 차이를 보이며, 특히 제 6, 7세대 상아질 접착제가 이전 세대보다 낮은 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.654-663
• /
• 2004

Statement of problem. According to the fracture pattern in several reports, fractures most frequently occur in the interface between the ceromer and the substructure. Purpose. The aim of this in vitro study was to compare the macro shear bond strength and microshear bond strength of a ceromer bonded to a fiber reinforced composite (FRC) as well as metal alloys. Material and methods. Ten of the following substructures, type II gold alloy, Co-Cr alloy, Ni-Cr alloy, and FRC (Vectris) substructures with a 12 mm in diameter, were imbedded in acrylic resin and ground with 400, and 1, 000-grit sandpaper. The metal primer and wetting agent were applied to the sandblasted bonding area of the metal specimens and the FRC specimens, respectively. The ceromer was placed onto a 6 mm diameter and 3 mm height mold in the macro-shear test and 1 mm diameter and 2 mm height mold in the micro-shear test, and then polymerized. The macro- and micro-shear bond strength were measured using a universal testing machine and a micro-shear tester, respectively. The macro- and micro-shear strength were analyzed with ANOVA and a post-hoc Scheffe adjustment ($\alpha$ = .05). The fracture surfaces of the crowns were then examined by scanning electron microscopy to determine the mode of failure. Chi-square test was used to identify the differences in the failure mode. Results. The macro-shear strength and the micro-shear strength differed significantly with the types of substructure (P<.001). Although the ceromer/FRC group showed the highest macroand micro-shear strength, the micro-shear strength was not significantly different from that of the base metal alloy groups. The base metal alloy substructure groups showed the lowest mean macro-shear strength. However, the gold alloy substructure group exhibited the least micro-shear strength. The micro-shear strength was higher than the macro-shear strength excluding the gold alloy substructure group. Adhesive failure was most frequent type of fracture in the ceromer specimens bonded to the gold alloys. Cohesive failure at the ceromer layer was more common in the base metals and FRC substructures. Conclusion. The Vectris substructure had higher shear strength than the other substructures. Although the shear strength of the ceromer bonded to the base metals was lower than that of the gold alloy, the micro-shear strength of the base metals were superior to that of the gold alloy.

• 한국융합학회논문지
• /
• 제10권1호
• /
• pp.155-161
• /
• 2019

복합소재는 기존의 일반적인 소재보다 내구성과 기계적 성질들이 뛰어난 경량 소재이다. 본 연구에서는 경량 복합소재에 주목하여, 접착제를 이용하여 접착한 CFRP 접착구조물의 정적 파괴 특성을 조사하고자 했고 적층 각도를 변수로 한 CFRP 이중외팔보 시험편을 설계하여 정적 파괴 해석을 수행하였다. 본 연구를 위하여 설계된 CFRP 이중외팔보 시험편들의 적층각도들은 각각 $30^{\circ}$와 $45^{\circ}$, $60^{\circ}$이며, 연구 결과로서는 적층 각도 $45^{\circ}$인 시험편이 가장 $30^{\circ}$, $60^{\circ}$의 적층 각도를 가진 시험편들보다 더 좋은 내구성을 보였으며, $30^{\circ}$의 적층 각도를 가진 시험편이 모든 시험편 중에서 내구성이 가장 취약한 것을 확인할 수 있었다. 이와 같은 본 연구 결과를 통하여 적층 각도 별 CFRP 접착구조물의 파손데이터를 확보할 수 있었으며, 본 연구결과를 토대로 얻은 접착 계면의 파손데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.456-468
• /
• 2008

본 연구는 5급 와동에서 유동성 복합 레진 수복 시 수종의 상아질 접착제에 따른 미세 누출 양상을 비교하고, resin tag 및 혼성층의 형상을 전자 현미경으로 관찰하고 비교 분석하였다. 행동 조절에 어려움이 많은 소아 환자의 접착 수복에서 술식의 간편화 및 시간 단축이 장점으로 부각되고 있는 All-in-one 상아질 접착제의 임상 적용 가능성을 평가하고 다음과 같은 결론을 얻었다. 1. 법랑질 변연에서는 II군(AQ Bond Plus)이 가장 높은 미세누출을 보였고 III군($AdheSE^{(R)}$ One), I군($Adper^{TM}$ Single Bond 2) 순으로 감소하였으며, II군은 I군, III군과 통계학적 유의차를 보였고(p<0.05), I군과 III군 사이에는 유의차가 없었다. 2. 상아질 변연에서는 II군, I군, III군의 순으로 미세누출이 증가하였고, 각각 통계학적 유의차를 보였다(p<0.05). 3. I군과 III군에서는 법랑질 변연이 상아질 변연보다 유의하게 낮은 미세누출을 보였으나(p<0.05), II군에서는 통계학적 유의차를 보이지 않았다(p>0.05). 4. 주사전자현미경 소견에서 II군과 III군은 resin tag의 형성이 매우 미약하고 불규칙한 양상을 보인 반면, I군에서는 비교적 긴밀하고 균일한 resin tag가 관찰되었다. 이상의 결과를 종합해보면, AQ Bond Plus와 $AdheSE^{(R)}$ One은 처리 과정의 단순화로 인한 시간 절약의 장점을 가지고 있으나 $Adper^{TM}$ Single Bond 2에 비해 상대적으로 높은 미세누출과 약한 결합력을 보인 본 실험의 결과를 미루어 볼 때, 임상적용 시 술식과 case에 따른 선택적 사용이 추천되는 바이다.