• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2021

Using the precipitation data observed at the Gochang Standard Weather Observatory (GSWO) during the winter seasons from 2014 to 2016, we analyzed the precipitation characteristics of the winter observation environment. For this study, we used four different types of precipitation gauges, i.e., No Shield (NS), Single Alter (SA), Double Fence Intercomparison Reference (DFIR), and Pit Gauge (PG). We analyzed the data from each to find differences in the accumulated precipitation, characteristics of the precipitation type, and the catch efficiency according to the wind speed based on the DFIR. We then classified these into three precipitation types, i.e., rain, mixed precipitation, and snow, according to temperature data from Gochang's Automated Synoptic Observing System (ASOS). We considered the DFIR to be the standard precipitation gauge for our analysis and the cumulative winter precipitation recorded by each other gauge compared to the DFIR data in the following order (from the most to least similar): SA, NS, and PG. As such, we find that the SA gauge is the most accurate when compared to the standard precipitation gauge used (DFIR), and the PG system is inappropriate for winter observations.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.123-124
• /
• 2003

Fishman and Larson (1987) derived tropical tropospheric column ozone by subtracting stratospheric column ozone measured by the Stratospheric Aerosol and Gas Experiment (SAGE) from total column ozone obtained by the Total Ozone Mapping Spectrometer (TOMS). Later, the Convective Cloud Differential (CCD) method (Ziemke et al., 1998) indicated stratospheric ozone is invariant with longitude and concluded the zonal variation of total ozone determines the zonal variation of tropospheric ozone. (omitted)

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.181-187
• /
• 1996

The Ultrasonic Interferometer Manometer(UIM) which can calibrae from1 Pa to $10^5$Pa has been developed, and its uncertainty is evaluated less than $\pm$(30ppm of pressure+12mPa). We can calibrate Capacitance Diaphragm Gauge(DCG) used as a transfer standard gauge in the low vacuum field. TheUIM enables to maintain the measurement traceability for industries. In order to improve the UIM's accracy, we will perform the international intercomparison withother national standards laboratories.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.469-470
• /
• 2009

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 1999.11a
• /
• pp.253-254
• /
• 1999

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.453-455
• /
• 2009

The wind speed measurement is performed using SODAR and LIDAR to evaluate availability of remote sensing in assessment of wind resource. The intercomparison comprises time series, correlation analysis and recovery rate. It shows that LIDAR is more effective than using SODAR to measure wind speed in ambient disturbance.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1156-1157
• /
• 2005

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.36-45
• /
• 1988

해양에서 바람에 의해 생성된 파도를 예측하는 모델을 제시하고 이 모델에 대한 개략적인 설명과 아울러 분류에 의한 기존 모델들을 소개하고 마지막으로 이 모델을 유한폭의 해양에 대하여 적용한 결과를 기존의 다른 모델들과 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1744-1746
• /
• 2003

This paper represents the development of national standard (NS) for lightning impulse (LI) voltage measuring system rated 400 kV. A traceability of the NS to the international standard could be achieved by the intercomparison test with Helsinki University. According to the IEC 60060-2, a measurement uncertainty was assessed. As a result of the tests, a measurement uncertainty and step response characteristics were satisfied with the requisite for NS.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.141-148
• /
• 1994

국가간에 힘 측정 또는 힘 측정기기의 교정 결과에 대한 상호 신뢰를 확보하기 위해서는 힘 표준에 대한 상호비교가 필수적이다. 본 논문에서는 한국의 힘 표준에 대한 국제적 신뢰를 확보하기 위하여 세계 여러 나라들과 힘 표준에 대한 국제비교 연구를 수행한 독일연방물리청과 힘 표준의 상호비교를 실시하였다. 비교시험 결과 한국과 독일의 힘 표준의 상대 편차는 100 kN .approx. 500 kN벙위에서 .+-. 5.5*$10^{-5}$ 이내로 나타났으며, 한국의 힘 표준의 정확도가 국제적 수준임을 확인하였다.