• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.379-399
• /
• 2013

In practice, analysis of laterally loaded piles is carried out using beams on non-linear Winkler springs model (often known as p-y method) due to its simplicity, low computational cost and the ability to model layered soils. In this approach, soil-pile interaction along the depth is characterized by a set of discrete non-linear springs represented by p-y curves where p is the pressure on the soil that causes a relative deformation of y. p-y curves are usually constructed based on semi-empirical correlations. In order to construct API/DNV proposed p-y curve for clay, one needs two values from the monotonic stress-strain test results i.e., undrained strength ($s_u$) and the strain at 50% yield stress (${\varepsilon}_{50}$). This approach may ignore various features for a particular soil which may lead to un-conservative or over-conservative design as not all the data points in the stress-strain relation are used. However, with the increasing ability to simulate soil-structure interaction problems using highly developed computers, the trend has shifted towards a more theoretically sound basis. In this paper, principles of Mobilized Strength Design (MSD) concept is used to construct a continuous p-y curves from experimentally obtained stress-strain relationship of the soil. In the method, the stress-strain graph is scaled by two coefficient $N_C$ (for stress) and $M_C$ (for strain) to obtain the p-y curves. $M_C$ and $N_C$ are derived based on Semi-Analytical Finite Element approach exploiting the axial symmetry where a pile is modelled as a series of embedded discs. An example is considered to show the application of the methodology.

• 산업기술연구
• /
• 제18권
• /
• pp.277-287
• /
• 1998

In this work continuous thermodynamics was adopted for describing the influence of copolymer polydispersity on phase separations in random copolymer solutions. Continuous themodynamic frameworks were formulated using the Flory-Huggin's excess Gibbs free energy model in which the concentration- and temperature-depentent terms of interaction parameter x were modified. Cloud-point curves and coexistence curves of poly(ethylene-vinylactate)/methylacetate solutions and poly(ehtylene-vinylacetate)/ethylacetate solutions were measured, and experimental data were fitted with theoretical relations formulated in this work. Calculated could-point curves were more good ageeable with experimental data than the modified Flory-Huggins's relations. Coexistence curves which were evaluated by using parameters of x estimated from experimental cloud-point curves, were found to coincide with experimental data.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.81-87
• /
• 2018

The seismic response, the natural frequencies and the mode shapes of an offshore wind turbine with twisted tripod substructure subject to various pile-ground interactions are discussed in this paper. The acceleration responses of the tower head by four historical earthquakes are presented as the seismic response, while the other loads are assumed as ambient loads. For the pile-ground interactions, the fixed, linear and nonlinear models are employed to simulate the interactions and the p-y, t-z and Q-z curves are utilized for the linear and nonlinear models. The curves are designed for stiff, medium and soft clays, and thus, the seven types of the pile-ground interactions are used to compare the seismic response, the acceleration of the tower head. The mode shapes are similar to each other for all types of pile-ground interactions. The natural frequencies, however, are almost same for the three clay types of the linear model, while the natural frequency of the fixed support model is quite different from that of the linear interaction model. The wind turbine with the fixed support model has the biggest magnitude of acceleration. In addition, the nonlinear model is more sensitive to the stiffness of clay than the linear pile-ground interaction model.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.867-882
• /
• 2012

Analytical (Rayleigh-Ritz method) and numerical studies are carried out and buckling interaction curves are developed for simply supported plates of varying aspect ratios ranging from 1 to 5, under the combined action of in-plane shear and tension. A multi-step buckling procedure is employed in the Finite Element (FE) model instead of a regular single step analysis in view of obtaining the buckling load under the combined forces. Both the analytical (classical) and FE studies confirm the delayed shear buckling characteristics of thin plate under the combined action of shear and tension. The interaction curves are found to be linear and are found to vary with plate aspect ratio. The interaction curve developed using Rayleigh-Ritz method is found to deviate in an increasing trend from that of validated FE model as plate aspect ratio is increased beyond value of 1. It is found that the observed deviation is due to the insufficient number of terms that is been considered in the assumed deflection function of Rayleigh-Ritz method and a convergence study is suggested as a solution.

• 한국자기학회지
• /
• 제21권5호
• /
• pp.151-156
• /
• 2011

전기도금법으로 제작한 CoPt 자성막의 두께가 자기상호작용과 자기적 성질에 미치는 영향을 잔류자기화 곡선과 자기이력 곡선을 측정 분석하여 규명하였다. CoPt 자성막의 두께가 증가함에 따라 수직 보자력과 포화자화가 증가하였으나 각형비는 급격히 감소하였다. 잔류자화 곡선의 분석결과로부터 모든 시료의 주된 자기상호작용 기구는 쌍극자 상호작용이며, 시료의 두께가 증가함에 따라 상호작용의 세기가 증가함을 알 수 있었다.

• 한국지반공학회논문집
• /
• 제18권1호
• /
• pp.127-132
• /
• 2002

사질토 지반에 근입된 모형말뚝에 대한 진동대 실험을 수행하여 말뚝지반 동적 상호작용 현상을 분석하고 동적군말뚝 효과를 산정하였다. 실험은 단말뚝과 말뚝간격을 말뚝직경의 3~8배로 변화시킨 $3\times3$ 군말뚝에 대하여 수행하였다. 동적 군맡뚝 효과는 단말뚝과 군말뚝의 동적 p-y곡선의 중심 기울기를 비교하여 산정하였고, 실험에서 얻어진 p-y곡선은 API의 반복 p-y곡선과 비교하였다. 실험결과 말뚝 간격, 입력 지진파의 주파수와 진폭 변화에 따른 동적 군말뚝 효과를 산정할 수 있었다.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.98-106
• /
• 2013

Seismic fragility curves for an offshore wind-turbine structure were obtained. The dynamic response of an offshore wind turbine was analyzed by considering the nonlinear behavior of layered soil and the added mass effect due to seawater. A pile-soil interaction effect was considered by using nonlinear p-y, t-z curves. In the analysis, the amplification effect of ground acceleration through layered soil was considered by applying ground motion to each of the soil layers. The vertical variation in ground motion was found by one-dimensional free-field analysis of ground soils. Fragility curves were determined by damage levels in terms of tower stress and nacelle displacements that were found from static pushover analysis of the wind-turbine structure.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.13-17
• /
• 2015

$YAlO_3:Tb{_x}^{3+}$ has been synthesized by a combustion process and the concentration x of Tb was varied from 0.001 and 0.05 mol% per mole of YAlO3. The energy transfer of $^5D_3{\rightarrow}^7F_6$(385nm) and $^5D_4{\rightarrow}^7F_5$(544nm) transitions on the $YAlO_3:Tb{_x}^{3+}$(x =0.001, 0.05) have been investigated by using decay curves. The energy transfer mechanism was explained by Inokuti and Hirayama model. The results of calculation and fitting showed that values of n are 6.11(x=0.01) and 6.13(x=0.005). These indicate that the energy transfer mechanism between $Tb^{3+}$ ions is dipole-dipole interaction.

• Journal of Magnetics
• /
• 제2권3호
• /
• pp.105-109
• /
• 1997

The Preisach model neds a density function or Everett function for the hysterisis operator to simulate the hysteresis phenomena. To obtain the function, many experimental data for the first order transition curves are required. However, it needs so much efforts to measure the curves, especially for the hard magnetic materials. By the way, it is well known that the density function has the Gaussian distribution for the interaction axis on the Preisach plane. In this paper, we propose a simple technique to determine the distribution function or Everett function analytically. The initial magnetization curve is used for the distribution of the Everett function for the coercivity axis. A major, minor loop and the initial curve are used to get the Everett function for the interaction axis using the Gaussian distribution function and acceptable results were obtained.

• Structural Engineering and Mechanics
• /
• 제37권6호
• /
• pp.649-669
• /
• 2011

In this paper an analytical model is presented that addresses the compressive response of short-fiber reinforced concrete members (FRC) with hooked steel fibers. This model is applicable to a wide range of concrete strengths and accounts for the interaction between the cover spalling and the concrete core confinement induced by transverse steel stirrups and also for buckling of longitudinal reinforcing bars. The load-shortening curves generated here analytically fit existing experimental data well.