Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2018.33.1.81

Evaluation of Pile-Ground Interaction Models of Wind Turbine with Twisted Tripod Support Structure for Seismic Safety Analysis  

Park, Kwang-yeun (Institute of Construction and Environmental Engineering, Seoul National University)
Park, Wonsuk (Department of Civil Engineering, Mokpo National University)
Publication Information
Journal of the Korean Society of Safety / v.33, no.1, 2018 , pp. 81-87 More about this Journal
Abstract
The seismic response, the natural frequencies and the mode shapes of an offshore wind turbine with twisted tripod substructure subject to various pile-ground interactions are discussed in this paper. The acceleration responses of the tower head by four historical earthquakes are presented as the seismic response, while the other loads are assumed as ambient loads. For the pile-ground interactions, the fixed, linear and nonlinear models are employed to simulate the interactions and the p-y, t-z and Q-z curves are utilized for the linear and nonlinear models. The curves are designed for stiff, medium and soft clays, and thus, the seven types of the pile-ground interactions are used to compare the seismic response, the acceleration of the tower head. The mode shapes are similar to each other for all types of pile-ground interactions. The natural frequencies, however, are almost same for the three clay types of the linear model, while the natural frequency of the fixed support model is quite different from that of the linear interaction model. The wind turbine with the fixed support model has the biggest magnitude of acceleration. In addition, the nonlinear model is more sensitive to the stiffness of clay than the linear pile-ground interaction model.
Keywords
twisted tripod; offshore wind turbine; pile-ground interaction; seismic response;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 C. baker, "Wind Engineering-Past, Present and Future", J. Wind Eng. Ind. Aerodyn., No. 95, pp. 843-870, 2007.
2 J. K. Kaldellis and D. Zafirakis, "The Wind Energy (R)evolution: a Short Review of a Long History", Renew. Energy, No. 36, pp. 1887-1901, 2011.
3 C. Golightly, "Tilting of Monopiles Long, Heavy and Stiff; Pushed Beyond Their Limits", Available Online: http://www.nce.co.uk/Journals/2014/06/03/z/h/d/GE-Janu ary-2014-Tilting-of-monopiles-Golightly.pdf
4 J. K. Kaldellis and D. P. Zafirakis, "Trends, Prospects, and R&D Directions in Wind Turbine Technology", Compr. Renew. Energy, No. 2, pp. 671-724, 2012.
5 W. Musial, S. Butterfield, and B. Ram, "Energy from Offshore Wind", In Proceedings of the Offshore Technology Conference, Houston, TX, USA, 2006.
6 W. Gong, "Lattice Tower Design of Offshore Wind Turbine Support Structures", Master's Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2011.
7 J. H. Yi, S. B. Kim, T. H. Han and G. L. Yoon, "Probabilistic Assessment of Dynamic Properties of Offshore Wind Turbines Considering Soil-Pile Interaction", J. Comput. Struct. Eng. Inst. Korea, Vol. 28, No. 4, pp. 343-350, 2015.   DOI
8 L. Fenech, T. Sant and M. Muscat, "Design and Cost Evaluation of a Deep Water Support Structure for a Wind Turbine in Central Mediterranean Waters", In Proceedings of the European Wind Energy Conference, Brussels, Belgium, 2011.
9 I. W. Chen, B. L. Wong, Y. H. Lin, S. W. Chau and H. H. Huang, "Design and Analysis of Jacket Substructures for Offshore Wind Turbines", Energies, MDPI, Vol. 264 No. 9, 2016.
10 Task Committee on Dynamic Analysis and Structural Design of Wind Turbine of Japan Society of Civil Engineering, "Structural Engineering Series 20, Guidelines for Design of Wind Turbine Support Structures and Foundations", JSCE/Committee on Structural Engineering, 2011.
11 American Petroleum Institute, "Recommended Practice for Planning, Design and Constructing Fixed Offshore Platforms-Working Stress Design", American Petroleum Institute Publishing Service, Washington D.C., pp. 1-263, 2005.
12 B. C. Ahn and J. D. Lee, "Characteristics of Skin Friction on Compression Loaded Group Piles", J. Korean Soc. Saf., Vol. 19, No. 3, pp. 95-100, 2004.
13 J. D. Lee and B. C. Ahn, "Characteristics of Stress- Displacement on Uplift Loaded Group Piles", J. Korean Soc. Saf., Vol. 20, No. 3, pp. 152-157, 2005.
14 J. K. Kim, J. H. Kim, J. H. Kim and T. M. Heo, "Development of Korean Standard Horizontal Design Spectrum Based on the Domestic and Overseas Intra-plate Earthquake Records", EESK J. Earthquake Eng., Vol. 20, No. 6, pp. 369-378, 2016.
15 H. Kawai, K. Michishita, and A. Deguchi, "Design Wind Loads on a Wind Turbine for Strong Wind", Proceedings of the BBAA VI International Colloquium on: Bluff Bodies Aerodynamics & Applications, Milano, Italy, 2008.
16 S. H. Lee, J. H. Lee, T. X. Nghiem and S. R. Kim, "Development of Nonlinear Spring Modeling Technique of Group Suction Piles in Clay", J. Korean Geosynthetics Society, Vol. 14, No. 1, pp. 1-10, 2015.
17 M. Hudson, "Correlations for Design of Laterally Loaded Piles on Soft Clay", Offshore Technology Conference, North Central Expressway Dallas, Texas, 1970.