• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.668-674
• /
• 2002

Structural integrity assessment is indispensable for preventing catastrophic failure of industrial structures/components/facilities. This diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive and complex procedure of specimen sampling. Especially, the mechanical properties at welded zone including weldment and heat affected zone could not be evaluated individually due to their size requirement problem. So, an advanced indentation technique has been developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. Also indentation technique can evaluate a residual stress based on the concept that indentation load-depth curves were shifted with the direction and the magnitude of residual stress applied to materials. In this study, we characterized the tensile properties and welding residual stress of various industrial facilities through the new techniques, and the results are introduced and discussed.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.568-575
• /
• 2006

The present paper provides plastic limit load solutions of axial and circumferential through-wall cracked pipes based on detailed three-dimensional (3-D) finite element (FE) limit analysis using elastic-perfectly-plastic behavior. As a loading condition, axial tension, global bending moment, internal pressure, combined tension and bending and combined internal pressure and bending are considered for circumferential through-wall cracked pipes, while only internal pressure is considered for axial through-wall cracked pipes. Especially, more emphasis is given for through-wall cracked pipes subject to combined loading. Comparisons with existing solutions show a large discrepancy in short through-wall crack (both axial and circumferential) for internal pressure. In the case of combined loading, the FE limit analyses results show thickness effect on limit load solutions. Furthermore, the plastic limit load solution for circumferential through-wall cracked pipes under bending is applied to derive plastic $\eta\;and\;{\gamma}$-factor of testing circumferential through-wall cracked pipes to estimate fracture toughness. Being based on detailed 3-D FE limit analysis, the present solutions are believed to be meaningful fur structural integrity assessment of through-wall cracked pipes.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• 중환자간호학회지
• /
• 제3권2호
• /
• pp.61-76
• /
• 2010

Purpose: This study was aimed to construct an algorithm of dyspnea emergency care and develop a simulation scenario for emergency care of dyspnea based on the algorithm. Methods: The first stage of this methodological study was to construct a preliminary algorithm based on a literature review, and content and clinical validity were established. Reflecting the result of content and clinical validity for this preliminary algorithm, simulation scenario was developed based on the modified Bay Area Simulation Collaborative scenario template. The content validity of this scenario was established, and clinical applicability was tested by applying this scenario to nurses. Results: The final simulation scenario of emergency care of dyspnea consisted of scenario overview, curricular integrity, and scenario script. The scenario was proceeded on 7 phases of the algorithm as follows; initial assessment, immediate emergency care, reassessment of dyspnea, monitoring respiratory failure, checking pulse if respiratory failure occurs, decision making on cardiopulmonary resuscitation or intubation, determining a differential diagnosis according to origin of dyspnea. Conclusion: The simulation scenario of emergency care of dyspnea developed in this study may provide a strategy of simulation education for emergency care of dyspnea for nurses.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.91-94
• /
• 2001

A structural test of the wind turbine rotor blade must be required to evaluate the uncertainty in design assessment due to use of material, design concepts, production processes and so on, and the possible impact on the structural integrity. In the full-scale static strength test, the measuring parameters are strain, displacements, loads, weight and the center of gravity. There are test equipments, measuring sensors, a test rig and fixtures to obtain measuring parameters. In order to simulate the aerodynamics load, the three-point loading method instead of the one-point loading method is applied. There is slightly some difference between the measured results and the predicted results with the reference fiber volume fraction of 60%. However, the agreement between the measured results and the predicted results with the actual fiber volume fraction of 52.5% is good. Even though a slightly non-linearity from 80% loading to 100% loading, a linear static solution is sufficient for the design purpose as the amount of the non-linearity is relatively small. Comparison between measured and predicted strain results at the maximum thickness positions of the blade profile for 0.236R(5.56m), 0.493R(11.59m) and 0.574R(13.43m), under 20%, 40%, 60%, 80% and 100% loadings for the upper part of the blade. The predicted values are in good agreement with the measured values.

• 국제물리치료학회지
• /
• 제2권1호
• /
• pp.201-206
• /
• 2011

In using both hands, everyone dominantly use one hand and it is called left-handedness or right-handedness person. Measurements of grip and pinch strength provide objective indexes to represent functional integrity of the upper extremity. This study was conducted for thirty female college students(19 right-handedness and 11 lefthandedness). For assessment of the type of handedness, questionnaire was used; for grip strength, Jamar dynamometer was used; for pinch strength, Jamar pinch gauge was used. In right handedness, the grip and pinch strength of the dominant right hand was significantly higher than those of the non-dominant hand. In addition, regular exercises were shown to give influences on reduction of strength gaps between dominant and non-dominant hands. In both groups of left and right handedness, the grip and pinch strength of the dominant hand were significantly higher than those of the non-dominant hand, and regular exercises were shown to give influences on reduction of strength gaps between dominant and non-dominant hand.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.116-123
• /
• 2006

During the last two decades, many researchers investigated influences of stress triaxiality on ductile fracture for various specimens and structures. With respect to a transferability issue, the local approach reflecting micro-mechanical specifics is one of effective methods to predict constraint effects. In this paper, the applicability of the local approach was examined through a series of finite element analyses incorporating modified GTN (Gurson-Tvergaard-Needleman) and Rousselier models as well as fracture toughness tests. To achieve this goal, fracture resistance (J-R) curves of several types of compact tension (CT) specimens with various crack length, with various thickness and with/without 20% side- grooves were estimated. Then. the constraint effects were examined by comparing the numerically estimated J-R curves with experimentally determined ones. The assessment results showed that the damage models might be used as useful tool for fracture toughness estimation and both the crack length and thickness effects should be considered for realistic structural integrity evaluation.

• Animal Systematics, Evolution and Diversity
• /
• 제27권2호
• /
• pp.151-158
• /
• 2011

Fish community structure in the Pyeongchanggang River was investigated from April to November 2009. About 900 individuals representing 24 species from eight families at six sites in the Pyeongchanggang River were collected. It was similar to the 2001's survey and it was less than 2006's survey. The Korean endemic species, Zacco koreanus was the most abundant, whereas subdominant species were native species, such as Pungtungia herzi, Zacco platypus, Rhynchocypris kumgangensis and Rhynchocypris oxycephalus. Three endangered species were collected at the sampling area, Acheilognathus signifier (relative abundance [RA] 0.9%), Pseudopungtungia tenuicorpa (RA 1.4%), and Cottus koreanus (RA 3.6%). One natural monument species, Hemibarbus mylodon, was included. According to the analysis of ecological indicator characteristics, the relative proportion of tolerant species was 6.3% (57 individuals), whereas the proportion of sensitive species was 65.9% (593 individuals). Species evenness, richness and diversity indices decreased gradually through the month from April to November during the study. Community indices in Pyeongchanggang River showed a high evenness index (J'>0.6), a low level of species richness (R<3.5) and a medium level of diversity (1.5

• 소성∙가공
• /
• 제23권4호
• /
• pp.211-220
• /
• 2014

The outer race of a constant velocity (CV) joint having six inner ball grooves has traditionally been manufactured by multi-stage warm forging, which includes forward extrusion, upsetting, backward extrusions, necking, ironing and sizing, and machining. In the current study, a multi-stage cold forging process is examined and an assessment for replacing and modifying the conventional multi-stage warm forging is made. The proposed procedure is simplified to the backward extrusion of the conventional process, and the sizing and necking are combined into a single sizing-necking step. Thus, the forging surface of the six ball grooves can be obtained without additional machining. To verify the suitability of the proposed process, a 3-dimensional numerical simulation on each operation was performed. The forging loads were also predicted. In addition, a structural integrity evaluation for the tools was carried out. Based on the results, it is shown that the dimensional requirements of the outer race can be well met.

• Journal of Welding and Joining
• /
• 제20권4호
• /
• pp.407-413
• /
• 2002

용접기술은 두 가지 재료를 효율적으로 신뢰성 있게 접합시킬 수 있기 때문에 다른 어떤 기술보다 널리 사용되고 있으며, 높은 부가가치를 가져다 준다. 용접계에서는 용접이 국내 산업에 아주 중요한 역할을 담당하고 있다고 생각하고 있으며, 이제 21세기에 접어들어서 우리 용접계의 현위치를 파악하고 새로운 장을 열어야 할 때이다. 미국에서도 이러한 준비의 일환으로 에너지성(Department of Energy)의 주도하에 Welding Vision 2020라는 명제를 걸 고 용접분야의 장래에 대한 심포지움과 토의를 하였다. 이 토의의 중심 주제는 20년 후의 용접계의 위상을 그려보며 장기적 연구 분야, 산학계의 정책 방향 등을 모색하였다 여기서 모아진 의견은, 용접계의 발전적인 진전을 위해서는 향후 2020년까지 다음과 같은 숙제들을 극복해야 된다는 것이었다 많은 산업분야에서 용접이 생산 분야의 주된 작업으로 인식시키는 것 - 용접이 용접 기능사의 재능에 의존도를 줄이고 과학적인 용접 기술 도입과 용접 기능사의 체계적 훈련 - 용접 작업환경 개선 - 용접을 과학적 고기술이라는 것으로 일반인들의 인식을 변화 시킴 - 신소재 개발연구시 용접이 같이 고려될 수 있는 환경 조성 - 훌륭한 인재 양성 및 재교육. 본고에서는 미국 용접계에서 분석한 자료들과 장래 연구되어져야 할 방향 및 분야들을 소개하고 현재 진행중인 자료 수집 및 분석의 진행 상황 및 용접계의 현 위치를 파악할 수 있는 몇 가지 자료들을 소개한다. 아울러, 용접계에서 리더쉽을 발휘해야 될 분야중의 하나이며 현재 많은 전문연구가 필요한 용접 역학(Welding Mechnics) 중의 용 접부의 안정성 평가(Integrity Assessment of Welded Joint)에 대한 과제와 연구 동향을 소개하고자 한다.