• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.99-124
• /
• 2009

Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.

• Progress in Medical Physics
• /
• v.21 no.2
• /
• pp.153-164
• /
• 2010

To determine the clinical target volumes considering vascularity and cellularity of tumors, the software was developed for mapping of the analyzed biological clinical target volumes on anatomical images using regional cerebral blood volume (rCBV) maps and apparent diffusion coefficient (ADC) maps. The program provides the functions for integrated registrations using mutual information, affine transform and non-rigid registration. The registration accuracy is evaluated by the calculation of the overlapped ratio of segmented bone regions and average distance difference of contours between reference and registered images. The performance of the developed software was tested using multimodal images of a patient who has the residual tumor of high grade gliomas. Registration accuracy of about 74% and average 2.3 mm distance difference were calculated by the evaluation method of bone segmentation and contour extraction. The registration accuracy can be improved as higher as 4% by the manual adjustment functions. Advanced MR images are analyzed using color maps for rCBV maps and quantitative calculation based on region of interest (ROI) for ADC maps. Then, multi-parameters on the same voxels are plotted on plane and constitute the multi-functional parametric maps of which x and y axis representing rCBV and ADC values. According to the distributions of functional parameters, tumor regions showing the higher vascularity and cellularity are categorized according to the criteria corresponding malignant gliomas. Determined volumes reflecting pathological and physiological characteristics of tumors are marked on anatomical images. By applying the multi-functional images, errors arising from using one type of image would be reduced and local regions representing higher probability as tumor cells would be determined for radiation treatment plan. Biological tumor characteristics can be expressed using image registration and multi-functional parametric maps in the developed software. The software can be considered to delineate clinical target volumes using advanced MR images with anatomical images.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.279-309
• /
• 2009

Greenhouse gas emissions should be precisely forecast to reduce the emissions from industrial production processes. This study calculated the direct and indirect $CO_2$ emission intensities of 401 industries using the Input-Output tables 2003 and statistical data on the amount of energy use. This study had some limitations in drawing study findings because overseas data were used given the lack of domestic data. Other limiting factors included the oil distribution problems in the oil refinery sector, re-review of carbon neutral, and insufficient consideration of waste treatment. Nonetheless, this study is very meaningful since the direct and indirect $CO_2$ emission intensities of 401 industries were calculated. Specifically, this study considered from the zero-waste perspective the effects of waste, which attract interest worldwide since coke gas and gas from the steel industry are obtained as byproducts for the first time in Korea. According to the results of the analysis of $CO_2$ emission intensity per industry, typical industries whose indirect $CO_2$ emission intensity is high include crude steel making, Remicon, steel wire rods & track rail, cast iron, and iron reinforcing rods & bar steel. These industries produce products using the raw materials produced in the industrial sector whose $CO_2$ emission intensity is high. The representative industries whose direct $CO_2$ emission intensity is high include cement, pig iron, lime & plaster products, andcoal-based compounds. These industries extract raw ore from nature and refine them into raw materials that are useful in other industries. The findings in this study can be effectively used for the following case: estimation of target $CO_2$ emission reduction level reflecting each industrial sector's characteristics, calculation of potential emission reduction of each policy to reduce $CO_2$ emissions, identification of a firm's $CO_2$ emission level, and setting of the target level of emission reduction. Moreover, the findings in this study can be utilized widely in fields such as System of integrated Environmental and Economic Accounting(SEEA) and Material Flow Analysis(MFA) as the current topic of research in Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.102-113
• /
• 2020

In this study, anti-arthritic effect of the mixed extract of radiation mutant Perilla frutescens var. crispa and Atractylodes macrophala koidz was investigated. Cell viability was determined by MTT assay in RAW 264.7 cells. The anti-inflammatory effect of mixed extracts was determined through measurement of the levels of reactive oxygen species (ROS) and nitric oxide (NO), release of inflammatory cytokines and expression of NF-κB, COX-2 and iNOS in LPS-induced RAW 264.7 cells after treatment of mixed extracts (5, 10, 25 ㎍/㎖). We showed that the mixed extracts was not toxic in the dose of 5, 10, 25 ug/ml, and significantly inhibited production of nitric oxide and ROS, cytokines including IL-1β, IL-6, TNF-α, and inflammatory proteins including NF-κB, COX-2 and iNOS in LPS-induced RAW 264.7 cells. Moreover, the mixed extract inhibited the type II collagen induced arthritis in DBA mice in the dose of 66.5 and 133mg/kg/day. Therefore, we suggest that mixed extract of radiation mutant Perilla frutescens var. crispa and Atractylodes macrophala koidz can be developed as a raw material for health functional food and therapeutics to treat the inflammatory arthritis.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.844-851
• /
• 2005

The purpose of this study was to determine feasibility of application of regenerated or recycled $TiO_2$ on the successive treatment of Cu(II)-EDTA. The recovery of copper, the reuse of $TiO_2$ and the assessment of acute toxicity was studied in the total eight successive photocatalytic reactions. Aqueous solution of $10^{-4}\;M$ Cu(II)-EDTA was treated using an illuminated $TiO_2$ at pH 6 in a circulating reactor. Two different procedures were applied in the reuse of $TiO_2$: i) recycle of $TiO_2$ without acid wash ii) regeneration of $TiO_2$ with acid wash to remove adsorbed copper in a previous experiment. The averaged decomplexation rate constant($k'_{obs}$) of Cu(II)-EDTA in recycle of $TiO_2$ without acid wash was approximately 45% less than that in regeneration of $TiO_2$ with acid wash. Removal of Cu(II) was near complete after 180 minutes in the total eight successive photocatalytic reactions using the regenerated $TiO_2$ after acid wash. In contrast, removal of Cu(II) was minimum at total fifth successive photocatalytic oxidation using the recycled $TiO_2$ without arid wash. The recovered $TiO_2$ was approximately 86% in average in each procedure. The recovered Cu(II) was 67.9% in average. The acute relative toxicity of the treated water rapidly declined at an initial reaction time up to 60 minutes but little declination was observed after 60 minutes due to little degradation of DOC. Relative toxicity of treated water using the recycled $TiO_2$ without acid wash we some what well correlated with the concentration of dissolved Cu(II). From this work, it is suggested that Cu(II)-EDTA can be effectively treated using an integrated cyclic photocatalytic oxidation with recovery of $TiO_2$ and Cu(II).

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• The Mathematical Education
• /
• v.30 no.1
• /
• pp.1-19
• /
• 1991

This study intends to provide some desirable suggestions for the development of application oriented mathematics curriculum. More specific objects of this study is: 1. To identify the meaning of application and modelling in mathematics curriculm. 2. To illuminate the historical background of and trends in application and modelling in the mathematics curricula. 3. To consider the reasons for including application and modelling in the mathematics curriculum. 4. To find out some implication for developing application oriented mathematics curriculum. The meaning of application and modelling is clarified as follows: If an arbitrary area of extra-mathematical reality is submitted to any kind of treatment which invovles mathematical concepts, methods, results, topics, we shall speak of the process of applying mathemtaics to that area. For the result of the process we shall use the term an application of mathematics. Certain objects, relations between them, and structures belonging to the area under consideration are selected and translated into mathemtaical objects, relation and structures, which are said to represent the original ones. Now, the concept of mathematical model is defined as the collection of mathematical objcets, . relations, structures, and so on, irrespective of what area is being represented by the model and how. And the full process of constructing a mathematical model of a given area is called as modelling, or model-building. During the last few decades an enormous extension of the use of mathemtaics in other disciplines has occurred. Nowadays the concept of a mathematical model is often used and interest has turned to the dynamic interaction between the real world and mathematics, to the process translating a real situation into a mathematical model and vice versa. The continued growing importance of mathematics in everyday practice has not been reflected to the same extent in the teaching and learning of mathematics in school. In particular the world-wide 'New Maths Movement' of the 19608 actually caused a reduction of the importance of application and modelling in mathematics teaching. Eventually, in the 1970s, there was a reaction to the excessive formallism of 'New Maths', and a return in many countries to the importance of application and connections to the reality in mathematics teaching. However, the main emphasis was put on mathematical models. Applicaton and modelling should be part of the mathematics curriculum in order to: 1. Convince students, who lacks visible relevance to their present and future lives, that mathematical activities are worthwhile, and motivate their studies. 2. Assist the acqusition and understanding of mathematical ideas, concepts, methods, theories and provide illustrations and interpretations of them. 3. Prepare students for being able to practice application and modelling as private individuals or as citizens, at present or in the future. 4. Foster in students the ability to utilise mathematics in complex situations. Of these four reasons the first is rather defensive, serving to protect or strengthen the position of mathematics, whereas the last three imply a positive interest in application and modelling for their own sake or for their capacity to improve mathematics teaching. Suggestions, recomendations and implications for developing application oriented mathematics curriculum were made as follows: 1. Many applications and modelling case studies suitable for various levels should be investigated and published for the teacher. 2. Mathematics education both for general and vocational students should encompass application and modelling activities, of a constructive as well as analytical and critical nature. 3. Application and modelling activities should. be introduced in mathematics curriculum through the interdisciplinary integrated approach. 4. What are the central ideas of, and what are less-important topics of application-oriented curriculum should be studied and selected. 5. For any mathematics teacher, application and modelling should form part of pre- and in-service education.

• Korean Journal of Ecology and Environment
• /
• v.39 no.2 s.116
• /
• pp.271-283
• /
• 2006

A systematic water quality survey was conducted in August, 2005 for a drinking water supply reservoir (the Jeolgol reseuoir located in an island), which is at an early stage of impoundment, to investigate the causes of water color deterioration of the reservoir and the clogging of filter beds of a water treatment plant. The reservoir shape was simple and its average depth was 5.5 m, increasing from upreservoir toward the downreservoir end near the dam. Dissolved oxygen (DO) and chloropllyll-a (chi-a) showed a large variation while water temperature had a smaller range. Transparency ranged from 0.6 to 0.9 m (average 0.7 m). The average value of turbidity was 9.3 NTU, ranging from 8.0 ${\sim}$ 12.1 NTU. The transparency and the turbidity appear to be affected by a combination of biological and non-biological factors. The poor transparency was explained by an increase of inorganic colloids and algal bloom in the reservoir. The blockage of the filter bed was attributed to the oversupply of phytoplanktons from the reservoir. The range and the average concentration of chi-a within the reservoir were 31.6 ${\sim}$ 258.9 ${\mu}g\;L^{-1}$, 123.6 ${\mu}g\;L^{-1}$ for the upper layer, and 17.0 ${\sim}$ 37.4 ${\mu}g\;L^{-1}$, 26.5 ${\mu}g\;L^{-1}$ for the bottom layer, respectively. A predominant species contributing the algal bloom was Dinophyceae, Peridinium bipes f. occultatum. The distribution of Peridinium spp. was correlated with chi-a concentrations. The standing crop of phytoplankton was highest in the upreservoir with $8.5\;{\times}\;103\;cells\;mL^{-1}$ and it decreased toward the downresevoir. Synedra of Bacillariophyceae and Microcystis aeruginosa of Cyanophyceae appeared to contribute to the algal bloom, although they are not dominated. It is mostly likely that sloped farmlands located in the watershed of the reservoir caused water quality problems because they may contain a significant amount of the nutrients originated from fertilizers. In addition, the aerators installed in the reservoir and a shortage of the inflowing water may be related to the poor water quality. A long-term monitoring and an integrated management plan for the water quality of the watersheds and the reservoir may be required to improve the water quality of the reservoir.

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.61-70
• /
• 2004

Environmentally sound control of Japanese lawngrass cutworm, Spodoptera depravata with Korean entomopathogenic nematodes (Heterorhabditis sp. Gyeongsan, Steinernema carpocapsae GSNI , S. glaseri Dongrae, S. longicaudum Nonsan, and S. monticolum Jiri) was evaluated in the laboratory and field. In addition, effect of turf height on the pathogenicity of entomopathogenic nematodes and density of ant (Formica japonica) and spine-tailed earwigs (Forficula scudderi) were investigated in the field. The corrected mortality of 3rd instar of S. depravata larvae was 53.3% to 66.7% 5 days later after treatment of entomopathogenic nematodes. $LC_{50}$ value of S. carpocapsae GSN1 and S. monticolum Jiri against 3rd instar of S. depravata was 6.9 and 3.9, respectively. Pathogenicity of S. carpocapsae GSN1 was different depending on larval stages, i.e., mortality of 2nd instar was the highest representing 73.3% but decreased from 3rd instar. Turf height affected pathogenicity of entomopathogenic nematodes. Mortality of 4th instar of S. depravata was 40.0% by S. carpocapsae GSN1 and 33.3% by S. monticolum Jiri, and 83.3% by fenitrothion, respectively, in the turf height of 14mm, but those were lower in 45mm. The corrected mortality of S. depravata larvae was lower at the entomopathgenic nematode plots than fenitrothion plot in the distribution field of Formica japonica. However, reduction rate of F japonica was higher in fenitrothion by 56.7% compared with 0% in S. carpocapsae GSN1 and 6.7% in S. monticolum Jiri. Turf height influenced control of S. depravate in S. carpocapsae GSN1 and fenitrothion. Control value of S. carpocapsae GSN1 was 62.2% in the turf height of 3-4cm, but not effective at all in 6-8cm and 12-14cm. However, there was not significantly different in fenitrothion plots. Forficula Scudderi was also reduced only in fenitrothion plots. Reduction rate was 100% in 3-4cm, 41.7% in 6-8cm, and 16.7% in 12-14cm, respectively.

• Proceedings of the KOR-KST Conference
• /
• 1995.12a
• /
• pp.45-73
• /
• 1995

The current paper presents a system dynamics model which can generate the land use anq transportation system performance simultaneously is proposed. The model system consists of 7 submodels (population, migration of population, household, job growth-employment-land availability, housing development, travel demand, and traffic congestion level), and each of them is designed based on the causality functions and feedback loop structure between a large number of physical, socio-economic, and policy variables. The important advantages of the system dynamics model are as follows. First, the model can address the complex interactions between land use and transportation system performance dynamically. Therefore, it can be an effective tool for evaluating the time-by-time effect of a policy over time horizons. Secondly, the system dynamics model is not relied on the assumption of equilibrium state of urban systems as in conventional models since it determines the state of model components directly through dynamic system simulation. Thirdly, the system dynamics model is very flexible in reflecting new features, such as a policy, a new phenomenon which has not existed in the past, a special event, or a useful concept from other methodology, since it consists of a lots of separated equations. In Chapter I, II, and III, overall approach and structure of the model system are discussed with causal-loop diagrams and major equations. In Chapter V _, the performance of the developed model is applied to the analysis of the impact of highway capacity expansion on land use for the area of Montgomery County, MD. The year-by-year impacts of highway capacity expansion on congestion level and land use are analyzed with some possible scenarios for the highway capacity expansion. This is a first comprehensive attempt to use dynamic system simulation modeling in simultaneous treatment of land use and transportation system interactions. The model structure is not very elaborate mainly due to the problem of the availability of behavioral data, but the model performance results indicate that the proposed approach can be a promising one in dealing comprehensively with complicated urban land use/transportation system.