• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.73-85
• /
• 2014

As the importance of big data analysis increases to improve the competitiveness of a corporate, a unified big data project development methodology is required in order to study the problem of a corporate in a systematic way and evaluate the problem w.r.t. a business value after solving the problem. This paper propose Scientific Data Anslysis and Development methodology(SDAD) which are integrated methodology of software development and project management for easier application into a field project. SDAD consisits of 6 stages(problem definition stage, data preparation stage, model design stage, model development stage, result extraction stage, service development state), each stages has detailed processes(47) and productions(93). SDAD, furthermore, unified previous ISP, DW, SW development methodologies in terms of the data analysis and can easily interchange the productions with them. This paper, lastly, introduces a way to assign responsible persons for each process and provide communication procedures in RACI chart to improves the efficiency of the interaction among professionals from different subjects. SDAD is applied to a Bigdata project in Korea Employment Information Services institution and the result turned out to be acceptable when evaluated by the supervision.

• Journal of The Korean Association For Science Education
• /
• v.32 no.2
• /
• pp.236-264
• /
• 2012

The purpose of this study is to provide teachers with sub-components of inquiry skills and help them to give direct instructions on the skills to their students. Inquiry skills and strategies are considered by-products of science and inquiry instruction by most of the science teachers. On the other hand, much research shows that many students are not familiar with the way that they can use inquiry skills therefore direct instruction on the inquiry skills is needed. The lack of guidance on the sub-components for the inquiry skills, however, results in science teachers' ignorance of the inquiry skills. As shown in the previous studies which suggest that without teachers' guidance, students cannot acquire the intended skills, and it is necessary to inform science teachers of the necessity for direct instruction on the inquiry skills and strategy as well as give them the sub-components of the inquiry skills. On the basis of the results from the previous research on the inquiry skills, this study presents the sub-components of basic inquiry skills (observation, classification, measure, prediction, and reasoning) and integrated inquiry skills (problem recognition, hypothesis formulation, control of variables, data transformation, data interpretation, drawing conclusion, and generalization).

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6033-6038
• /
• 2015

Background: Experience of lung cancer includes negative impacts on both physical and psychological health. Pain is one of the negative experiences of lung cancer. Cognitive behavioral therapy techniques are often recommended as treatments for lung cancer pain. The objective of this review was to synthesize the evidence on the effectiveness of cognitive behavioral therapy techniques in treating lung cancer pain. This review considered studies that included lung cancer patients who were required to 1) be at least 18 years old; 2) speak and read English or Thai; 3) have a life expectancy of at least two months; 4) experience daily cancer pain requiring an opioid medication; 5) have a positive response to opioid medication; 6) have "average or usual" pain between 4 and 7 on a scale of 0-10 for the day before the clinic visit or for a typical day; and 7) able to participate in a pain evaluation and treatment program. This review considered studies to examine interventions for use in treatment of pain in lung cancer patients, including: biofeedback, cognitive/attentional distraction, imagery, hypnosis, and meditation. Any randomized controlled trials (RCTs) that examined cognitive behavioral therapy techniques for pain specifically in lung cancer patients were included. In the absence of RCTs, quasi-experimental designs were reviewed for possible conclusion in a narrative summary. Outcome measures were pain intensity before and after cognitive behavioural therapy techniques. The search strategy aimed to find both published and unpublished literature. A three-step search was utilised by using identified keywords and text term. An initial limited search of MEDLINE and CINAHL was undertaken followed by analysis of the text words contained in the title and abstract, and of the index terms used to describe the article. A second search using all the identified keywords and index terms was then undertaken across all included databases. Thirdly, the reference list of all identified reports and articles were searched for additional studies. Searches were conducted during January 1991- March 2014 limited to English and Thai languages with no date restriction. Materials and Methods: All studies that met the inclusion criteria were assessed for methodological quality by three reviewers using a standardized critical appraisal tool from the Joanna Briggs Institute (JBI). Three reviewers extracted data independently, using a standardized data extraction tool from the Joanna Briggs Institute (JBI). Ideally for quantitative data meta-analysis was to be conducted where all results were subject to double data entry. Odds ratios (for categorical data) and weighted mean differences (for continuous data) and their 95% confidence intervals were to be calculated for analysis and heterogeneity was to be assessed using the standard Chi-square. Where statistical pooling was not possible the finding were be presented in narrative form. Results: There were no studies located that met the inclusion requirements of this review. There were also no text and opinion pieces that were specific to cognitive behavioral therapy techniques pain and lung cancer patients.Conclusions: There is currently no evidence available to determine the effectiveness of cognitive behavioural therapy techniques for pain in lung cancer patients.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.45-51
• /
• 2015

In this paper, we study the RF characteristics of the short wavelength thin-film transmission line employing microstrip line (ML)/coplanar waveguide (CPW) composite structure on silicon substrate for application to RFIC (radio frequency integrated circuit). The thin-film transmission line employing ML/CPW composite structure showed a wavelength shorter than conventional transmission lines. Concretely, at 10 GHz, the wavelength of the transmission line employing ML/CPW composite structure was 6.26 mm, which was 60.5 % of the conventional coplanar waveguide. We also extracted the bandwidth characteristic of the transmission line employing ML/CPW composite structure using equivalent circuit analysis. The S parameter of the equivalent circuit showed a good agreement with measured result. According to the bandwidth extraction result, the cut-off frequency of thin-film transmission line employing ML/CPW composite structure was 377 GHz. Above results indicate that the transmission line employing ML/CPW composite structure can be effectively used for application to broadband and compact RFIC.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.263-273
• /
• 2008

The precision of sensors' position is particularly important in the application of road extraction or digital map generation. In general, the various ranging solution systems such as GPS, Total Station, and Laser Ranger have been employed for the position of the sensor. Basically, the ranging solution system has problems that the signal may be blocked or degraded by various environmental circumstances and has low temporal resolution. To overcome those limitations a IMU/range integrated system could be introduced. In this paper, after pointing out the limitation of extended Kalman filter which has been used for workhorse in navigation and geodetic community, the two sampling based nonlinear filters which are sigma point Kalman filter using nonlinear transformation and carefully chosen sigma points and particle filter using the non-gaussian assumption are implemented and compared with extended Kalman filter in a simulation test. For the ranging solution system, the GPS and Total station was selected and the three levels of IMUs(IMU400C, HG1700, LN100) are chosen for the simulation. For all ranging solution system and IMUs the sampling based nonlinear filter yield improved position result and it is more noticeable that the superiority of nonlinear filter in low temporal resolution such as 5 sec. Therefore, it is recommended to apply non-linear filter to determine the sensor's position with low degree position sensors.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.311-318
• /
• 2007

Soil contamination in Korea has been accelerated every year. Because of their persistence and cumulative tendency in the environment, soil contaminants have potential long-term environmental and health concerns and it is estimated to cost enormous expense for clean-up. Korea government has legislated the law on conservation of soil environment in mid 1990s, and managed and treated hazardous wastes in contaminated sites as a remediation policy since then. Soil remediation technologies are classified into in-situ/ex-situ or biological/physico-chemical/thermal processes according to applied places or treatment methods, respectively. In Korea, clean-up of polluted sites has been mostly carried out at military areas, railroad-related sites and small-scale oil spilt sites. For these cases, in-situ remediation technologies such as soil vapor extraction (SVE) and bioventing were mainly used. In recent days, an environmental-friendly soil remediation emerged as a new concept - for example, a new soil remediation process using nanotechnology or molecular biological study and an integrated process which can overcome the limitation of individual process. To have better applicability of remediation technologies, comprehensive understandings about the pollutants and soil characteristics and the suitable techniques are required to be investigated. Above all, development of environmental technologies based on the sustainability accompanied by public attention can improve soil environment in Korea.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.39-50
• /
• 2013

The study area is located on the western coastal region of Korea, partly had been reclaimed lands. Groundwaters of the coastal area show lower Eh and DO values (Eh: 0.57 V ${\rightarrow}$ 0.13 V, DO; 9.7 mg/l ${\rightarrow}$ 1.3 mg/l), and higher Fe concentrations (> 20 mg/l) than those of the inner land (< 0.3 mg/l), indicating that the redox condition of groundwater changes from oxic into suboxic/anoxic conditions as it flows from the inland toward the coastal area. In addition, Fe speciation of groundwater from the coastal area demonstrates that the most dissolved Fe exist as $Fe^{2+}$, reflecting that groundwater is under the anoxic condition to sufficiently occur Fe reduction. According to the result of Fe extraction with the sediment samples from three wells (A, B, C), the sediments provide enough $Fe^{3+}$ to occur the Fe reduction in the groundwater. Integrated all results of the groundwater and sediment, we infer that the Fe reduction to occur in groundwater is associated with the reclamation processes of the study area.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.99-106
• /
• 2008

A synthetic aperture radar (SAR) system is of great interest in many fields of civil and military applications because of all-weather and luminance free imaging capability. SAR image quality parameters such as spatial resolution, peak to sidelobe ratio (PSLR), and integrated sidelobe ratio (ISLR) can be normally estimated by modeling of impulse response function (IRF) which is obtained from various system design parameters such as altitude, operational frequency, PRF, etc. In modeling of IRF, however, background clutter environment surrounding the IRF is generally neglected. In this paper, analysis method for SAR mage quality is proposed in the real background clutter environment. First of all, SAR raw data of a point scatterer is generated based on various system parameters. Secondly, the generated raw data can be focused to ideal IRF by range Doppler algorithm (RDA). Finally, background clutter obtained from image of currently operating SAR system is applied to IRF. In addition, image quality is precisely analyzed by zooming and interpolation method for effective extraction of IRF, and then the effect of proposed methodology is presented with several simulation results under the assumption of estimation error of Doppler rate.