• 산업경영시스템학회지
• /
• 제24권67호
• /
• pp.49-60
• /
• 2001

Data warehouse(DW) manages all information in a Enterprise and also offers the specific information to users. However, it might be difficult to develope an effective DW system due to varieties in computing facilities, data base, and operating systems. The heterogeneous system environments make it harder to extract data and to provide proper information to usesr in real time. Also commonly occurred is data inconsistency of non-integrated legacy system, which requires an effective and efficient data extraction flow control as well as data cleansing. We design the integrated automatic ETT(Extraction Transformation Transportation) system to control data extraction flow and suggest implementation methodology. Detail analysis and design are given to specify the proposed ETT approach with a real implementation.

• 전자공학회논문지A
• /
• 제29A권1호
• /
• pp.48-59
• /
• 1992

This paper presents the design of a layout processing system that performs circuit and symbolic extraction from hierarchical designs containing arbitrarily shaped layout. The system is flexible enough to deal with various technologies, MOS or bipolar, by providing extraction rules in the form of technology files. In this paper, new efficient algorithms for trapezoidal decomposition of polygon and symbolic path extraction using trapezoidal template are proposed for symbolic extraction. Circuit and symbolic extractor is developed as an integrated design environment of SOLID system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.1119-1122
• /
• 2000

This paper describes on RF circuit simulation technique, especially on a RF modeling and a model extraction of a LDMOS(Lateral Diffused MOS) that has gate-width (Wg) dependence. Small-signal model parameters of the LDMOSs with various gate-widths extracted from S-parameter data are applied to make the relation between the RF performances and gate-width. It is proved that a source inductance (Ls) was not applicable to scaling rules. These extracted small-signal model parameters are also utilized to remove extrinsic elements in an extraction of a large-signal model (using HP Root MOSFET Model). Therefore, we can omit an additional measurement to extract extrinsic elements. When the large-signal model with Ls having the above gate-width dependence is applied to a high-power LDMOS module, the simulated performances (Output power, etc.) are in a good agreement with experimental results. It is proved that our extracted model and RF circuit simulation have a good accuracy.

• 한국문헌정보학회지
• /
• 제51권4호
• /
• pp.227-248
• /
• 2017

본 논문에서는 급격히 증가하는 생의학 분야 비정형 텍스트에서 핵심적 내용을 추출할 수 있는 기계학습 기반 정보 추출시스템을 구축하기 위한 언어자원 수집 및 통합적 구조화 방안을 제안한다. 제안된 방법은 정보 추출 시스템을 크게 개체명 인식과 개체명 간 관계 추출 시스템으로 구분하고, 각각의 시스템에 적합한 학습데이터를 구성하기 위해 생의학 분야 개체명 사전과 학습 집합을 수집한다. 그리고 수집된 해당 자원들의 특성을 분석하여 개체 구별을 위해 필수적으로 포함시켜야 할 항목들을 도출하고 이를 통해 시스템 학습과정에서 사용될 학습 데이터를 구성하기 위한 항목을 선정한다. 이와 같이 선정된 학습데이터의 구성 내용에 따라 수집된 자원들을 가공하여 학습 데이터를 구축한다. 본 연구에서는 생의학 분야의 하위 분야인 유전자, 단백질, 질병, 약물 4개 분야에 대한 개체명 사전과 학습 집합을 수집하여 각각을 학습 데이터로 구축하였으며, 개체명 사전을 통해 구축된 개체명 인식용 학습 데이터를 대상으로 개체명 수용 범위를 측정하기 위한 검증 과정을 수행하였다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.866-878
• /
• 2021

Procedures play a key role in ensuring safe operation at nuclear power plants (NPPs). Development and maintenance of a large number of procedures reflecting the best knowledge available in all relevant areas is a complex job. This paper introduces a newly developed methodology and the implemented software, called iExtractor, for the extraction of syntactic and semantic information from NPP procedures utilizing natural language processing (NLP)-based technologies. The steps of the iExtractor integrated with sets of rules and an ontology for NPPs are described in detail with examples. Case study results of the iExtractor applied to selected procedures of a U.S. commercial NPP are also introduced. It is shown that the iExtractor can provide overall comprehension of the analyzed procedures and indicate parts of procedures that need improvement. The rich information extracted from procedures could be further utilized as a basis for their enhanced management.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.33-42
• /
• 2013

This paper describes a multiple vehicle tracking algorithm using an integrated probabilistic data association filter (IPDAF) in urban environments. The algorithm consists of two parts; a pre-processing stage and an IPDA tracker. In the pre-processing stage, measurements are generated by a feature extraction method that manipulates raw data into predefined geometric features of vehicles as lines and boxes. After that, the measurements are divided into two different objects, dynamic and static objects, by using information of ego-vehicle motion. The IPDA tracker estimates not only states of tracks but also existence probability recursively. The existence probability greatly assists reliable initiation and termination of track in cluttered environment. The algorithm was validated by using experimental data which is collected in urban environment by using single laser scanner.

• ETRI Journal
• /
• 제22권1호
• /
• pp.38-46
• /
• 2000

The extraction of model parameters for embedded passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, a method for optimizing the extraction of these parameters using genetic algorithms is presented. The results of this method are compared with optimization using the Levenberg-Marquardt (LM) algorithm used in the HSPICE circuit modeling tool. A set of integrated resistor structures are fabricated, and their scattering parameters are measured for a range of frequencies from 45 MHz to 5 GHz. Optimal equivalent circuit models for these structures are derived from the s-parameter measurements using each algorithm. Predicted s-parameters for the optimized equivalent circuit are then obtained from HSPICE. The difference between the measured and predicted s-parameters in the frequency range of interest is used as a measure of the accuracy of the two optimization algorithms. It is determined that the LM method is extremely dependent upon the initial starting point of the parameter search and is thus prone to become trapped in local minima. This drawback is alleviated and the accuracy of the parameter values obtained is improved using genetic algorithms.

• ETRI Journal
• /
• 제24권5호
• /
• pp.341-348
• /
• 2002

We propose an asymmetric sampled grating laser and a multi-wavelength laser array associated with it. Asymmetric sampling periods combined with an index shifter make it possible to use first order reflection for lasing operations. With the structure of our design, we achieved a simple fabrication procedure as well as a high yield without using complex and time-consuming e-beam lithography for multi-period gratings. We analyzed the effect of mirror coating by numerical analysis to improve single mode and power extraction performance. By using high reflection-antireflection coatings, we obtained high power extraction efficiency without degradation of the single mode property. For the multi-wavelength laser array, to gain wavelength control, we varied the sampling periods from one laser to an adjacent laser across the array. With this approach, we showed the feasibility of an array of up to 30 channels with 100 GHz wavelength spacing.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.7-14
• /
• 1999

This simulation method is developed by using GateCycle code for the performance evaluation of the gas turbine in IGCC(Integrated Gasification Combined Cycle) power plant that uses clean coal gas fuel derived from coal gasification and gas clean-up processes and it is integrated with ASU(Air Separation Unit). In the present simulation method, thermodynamic calculation procedure is incorporated with compressor performance map and expander choking models for considering the off-design effects due to coal gas firing and ASU integration. With the clean coal gases produced through commercially available chemical processes, their compatibility as IGCC gas turbine fuel is investigated in the aspects the overall performance of the gas turbine system. The predictions by the present method show that the reduction of the air extraction from gas turbine to ASU results in a remarkable increase in the efficiency and net power of gas turbines, but it is accompanied with a shift of compressor operation point toward to surge limit. In addition, the present analysis results reveal the influence of compressor performance characteristics of gas turbine have to be carefully examined in designing the ASU integration process and evaluating the overall performance parameters of the gas turbine in IGCC Power plant.

• 센서학회지
• /
• 제29권2호
• /
• pp.123-127
• /
• 2020

In this paper, the estimation of the disparity for depth extraction in monochrome complementary metal-oxide-semiconductor (CMOS) image sensors with offset pixel apertures is presented. To obtain the depth information, the disparity information between two different channel data of the offset pixel apertures is required. The disparity is caused by the difference in the response angle between the left- and right-offset pixel aperture images. A depth map is implemented by the generated disparity. Therefore, the disparity is the most important factor for realizing 3D images from the designed CMOS image sensor with offset pixel apertures. The disparity is influenced by the pixel height and offset value of the offset pixel aperture. To confirm this correlation, the offset value is set to maximum within the pixel area, and the disparity values corresponding to the difference in the heights are calculated and compared. The disparity is derived using the camera-lens formula. Two monochrome CMOS image sensors with offset pixel apertures are used in the disparity estimation.