• 한국산림과학회지
• /
• 제83권4호
• /
• pp.521-530
• /
• 1994

재적식(材積式)은 보통 흉고직경과 수고의 함수로 표현되는데, 회귀분석(回歸分析)을 통해 정확도가 높은 식이 주로 채택되고 있다. 우리나라에서도 지금까지 흉고직경(D)과 수고(H)를 독립변수로 하는 지수식(指數式)($V=aD^bH^c$)으로 각 수종에 대한 일반(一般)재적식을 유도하고 있다. 본 연구에서는 강원도 지방내의 홍천, 정선, 명주, 원주, 영월지역에 대한 간곡선식(幹曲線式)을 지역별로 유도하고, 이 간곡선식의 회전체(回轉體) 적분(積分)을 통해 지역별 재적을 직접 추정할 수 있는 간곡선 및 재적식 모델을 마련하였다. 조제된 모델에 의해 지역별로 추정된 재적은 기존의 강원도 지방 소나무재적표에 의해 추정된 재적에 비해 정확도가 높았다. 또한 지역간곡선식에 의해 유도된 간곡선의 형태는 지역에 따라 서로 달랐으며, 특히 영월지역과 원주지역의 수간은 다른 지역에 비해 수간상부에서 가늘게 발달하는 것으로 나타났다. 이와같은 간곡선의 다양한 형태는 재적추정에 있어서도 지역간 차이를 유발하였다.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.227-231
• /
• 2004

It is the common features of the integral reactors that the main components of the RCS are installed within the reactor vessel, and so there are no any flow pipes connecting the steam generator or the pump whose type is the axial flow. Due to no any flow pipes, it is impossible to measure the differential pressure at the RCS of the integral reactors, and it also makes impossible measure the flow-rate of the reactor coolant. As a alternative method, the method by the measurement of the pump power of the axial flow pump has been introduced in this study. Up to now, we did not found out a precedent which the pump power is used for the flow-rate calculation at normal operation of the commercial nuclear power plants. The objective of the study is to embody the flow-rate calculation method by the measurement of the pump power in an integral reactor. As a result of the study, we could theoretically reason that the capacity-head curve and capacity-shaft power curve around the rated capacity with the high specific-speeded axial flow pumps have each diagonally steep incline but show the similar shape. Also, we could confirm the above theoretical reasoning from the measured result of the pump motor inputs. So, it has been concluded that it is possible to calculate the flow-rate by the measurement of the pump motor inputs.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1152-1160
• /
• 2007

이 논문에서는 선형 유도 모터로 추진되는 자기부상 열차 시스템에서 열차의 속도에 따라서 추진 시스템으로부터 발생하는 간섭력의 부상 시스템에 대한 영향을 최소화하기 위한 적분형 sliding mode 부상제어기의 설계에 대해서 다룬다. 제어기 구조는 적분형 제어기와 sliding mode 제어기로 구성된다. 적분형 제어기는 정적 외란에 대해서 정상상태 오차가 영에 도달하는 것을 보장하고 sliding mode 제어기는 수학적 모델이 본질적으로 갖고 있는 불확실성에 대한 강건성을 보장 한다 sliding mode 제어기의 chattering 문제를 해결하기 위해서 연속 함수를 도입한다. 선형 유도모터에 의한 간섭력은 실험 데이터의 curve fitting에 의한 수학적 모델링을 통하여 수식화 한다. 컴퓨터 모의시험을 통해서 설계돈 적분형 sliding mode 제어기의 효율성을 보인다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.161-166
• /
• 2003

It is the common features of the integral reactors that the main components of the RCS are installed within the reactor vessel, and so there are no any flow pipes connecting the coolant pumps or steam generators. Due to no any flow pipes, it is impossible to measure the differential pressure at the RCS of the integral reactors, and it also makes impossible measure the flow-rate of the reactor coolant. As a alternative method, the method by the measurement of coolant pump power has been introduced in this study. Up to now, we did not found out a precedent which the coolant pump power is used for the real-time flow-rate calculation at normal operation of the commercial nuclear power plants. The objective of the study is to embody the real-time flow-rate calculation method by the measurement of coolant pump power in an integral reactor. As a result of the study, we could theoretically reason that the capacity-head curve and capacity-shaft power curve around the rated capacity with the high specific-speeded axial flow pumps have each diagonally steep incline but show the similar shape. Also, we could confirm the above theoretical reasoning from the measured result of the pump motor inputs, So, it has been concluded that it is possible to calculate the real-time flow-rate by the measurement of pump motor inputs. In addition, the compensation for a above new method can be made by HBM being now used in the commercial nuclear power plants.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.80-90
• /
• 1997

The purpose of this study is to evaluate the validity examination of the J-R curve characteristics for the nuclear reactor pressure vessel steels and Al alloys by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agree well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The J-R curve obtained by the ASTM unloading compliance method is over-predicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load-displacement curve without particular crack measurement equipment.

• 소음진동
• /
• 제7권2호
• /
• pp.215-222
• /
• 1997

The flow and acoustic fields due to a vortex ring interaction with a rigid sphere are simulated numerically. The flow field is regarded as three-dimensional inviscid and incompressible. The vorticity is assumed to be concentrated inside the finite core of vortex filament. The vortex filament curve, described by parabolic blending curve function, is used to effectively solve the modified Biot-Savart equation. The interaction between a vortex ring and a rigid sphere using the parabolic blending curve is calculated. The trajectory of the vortex ring is obtained with several different initial positions between the ring and the sphere. The force variations acting on the sphere are calculated by using the boundary integral method. Finally, we can also obtain the acoustic signals at the far field observation positions from the force variations acting on the rigid surface. We can find that the dipole axis of the directivity patterns are rotated during the interacting phenomena.

• 한국게임학회 논문지
• /
• 제20권3호
• /
• pp.65-74
• /
• 2020

섀도우 매핑 알고리즘에서 섀도우 맵이 확대되면 계단형 섀도우 실루엣이 나타난다. 본 논문에서는 재구성된 실루엣을 이용하여 소프트 섀도우를 생성한다. 먼저 섀도우 실루엣은 선형 또는 2차 곡선 모델을 기반으로 한 서브 텍셀 엣지 검출 방법을 통해 확보한다. 그리고 적분을 이용하여 정확한 섀도우 밝기의 평균을 얻기 위해 적분 기반 섀도우 필터링 알고리즘을 사용한다. 본 논문은 상기 과정을 통해 앨리어싱 현상이 두드러지는 실루엣을 효과적으로 제거하며 소프트 섀도우를 효율적으로 생성하는 방법을 제시한다.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.385-392
• /
• 1997

The shape of TL glow curve is a useful indicator for assurance of correct reading of the personal dosimeter. Since the reading procedure of TLD is irreversible, however, an analytic remedy should be considered to procure reliable dosimetric information for the readings with irregular glow con shape. In this study, kinetic trapping parameters of CaSO$_4$ : Dy Teflon personal dosimeter(Teledyne PB-6A) were analyzed by Halperin and Braner's model for general-order kinetics. From these kinetic tapping parameters, we also developed a simple procedure to retrieve the dosimetric information from abnormally distorted glow curves. The computerized glow curve deconvolution(CGCD) fitting of the reference glow curve with kinetic parameters from this study yields relative errors of about 5% from the expected integral. It was also found that the glow curve remedial procedure developed could retrieve the distorted TL glow curves within ewer ranges of 1575. With the glow curve retrieval techniques, doses incurred by gamma radiation can now be successfully re-constructed for the CaSO$_4$ : Dy Teflon dosimeter resulting abnormal glow curves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.48-52
• /
• 2001

In this paper presents an accurate AFM used that is free from the Z-directional distortion of a servo actuator is described. Two mathematical correction methods by the in-situ self-calibrationare employed in this AFM. One is the method by the integration, and the other is the method by inverse function of the calibration curve. The in situ self-calibration method by the integration, the derivative of the calibration curve function of the PZT actuator is calculated from the profile measurement data sets which are obtained by repeating measurements after a small Z-directional shift. Input displacement at each sampling point is approximately estimated first by using a straight calibration line. The derivative is integrated with reference to the approximate input to obtain the approximate calibration curve. Then the approximation of the input value of each sampling point is improved using the obtained calibration curve. Next the integral of the derivative is improved using the newly estimated input values. As a result of repeating these improving process, the calibration curve converges to the correct one, and the distortion of the AFM image can be corrected. In the in situ self-calibration through evaluating the inverse function of the calibration curve, the profile measurement data sets were used during the data processing technique. Principles and experimental results of the two methods are presented.

• 대한수학회논문집
• /
• 제24권2호
• /
• pp.181-185
• /
• 2009

The Drinfeld modular function ${\mu}$ is a generator of the function field of the Drinfeld modular curve $X_0(T)$ and has an t-expansion with the integral coefficients at infinity. In this paper, we show that the coefficients of ${\mu}$ has congruence properties modulo powers of T.