• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.226-227
• /
• 2015

This research is to measure and analyze the thermal performance of the apartment structure and to evaluate and establish standards of thermal insulation defect in order to make the basic data necessary for determining the degree of the thermal performance degradation and for repairing and reinforcing the exterior wall of the existing apartment. The following conclusions could be derived thorough the investigation of outer wall temperature distribution and the insulation assesment experiments using a model of specimens for the apartment houses' outer walls. It was confirmed that for the thermal performance through the insulating material thicknesses 5cm, 8cm in walls, the thermal insulation thickened by 3cm, from 5cm to 8cm, but that the actual temperature difference reached only about 1 ~ 2℃. This implies that the thermal performance improvement using the thermal insulation in walls is not significant and that it is difficult to insulate the thermal bridge area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.192-193
• /
• 2007

Epoxy resign is used to insulate electricity in the gas insulated switchgear. There were many research to find out characteristics of the epoxy resign. But there is a poor research for the mechanical investigations. In this paper, we made an experiment and evaluated mechanical properties with specimens of the epoxy resign. Using Spacer which is a part of high voltage switchgear, and we studied the structural analysis methods and made an overture a how to analysis in order to solve problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.896-897
• /
• 2007

산업사회의 발달과 정보통신의 발전 등으로 전송전압이 상승하고 도시의 인구 집중화 현상으로 전력설비의 대용량, 고전압으로 인해 가스절연개폐장치(GIS)의 사용도 증가하고 있다. 이에 따라 GIS를 구성하고 있는 중요부품 중의 하나인 절연스페이서의 사고도 증가하는 추세에 있어 한전 및 국외 사용자로부터 수명보증 등 신뢰성에 대한 공인 시험기관 성적서 또는 인증서가 요구되고 있다. 따라서 본 논문에서는 한전의 표준규격(ES 150-579)에 따른 신뢰성평가기준에 부합되는 냉열시험과 장기과전압시험을 실시하여 절연스페이서의 체계적인 수명평가를 실시하였다.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.86-91
• /
• 2009

입력부 근방의 정전용량 변화를 감지하여 동작하는 간접접촉형 실내조명 스위치를 설계하고 제작했다. 그리고 간접접촉 스위치의 입력 전극에 설치된 커패시터의 정전용량을 변화시켜가며 간접접촉을 감지하는 입력 전극을 절연하는 물질의 두께 및 종류 변화에 따른 동작 감도를 측정한 결과를 표와 그래프로 나타냈다. 절연 물질은 유리, 아크릴, 그리고 나무(MDF)였는데, 이들의 유전율은 상당히 다르지만 스위치의 동작 감도는 유전율의 차이만큼 크지 않은 것이 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.438-439
• /
• 2006

Porcelain insulators have generally been used in Korea to insulate a transmission line from the tower, and a highly polymerized compound polymer insulator which has superior stain proof characteristics, has also been used widely. Currently, a worker rides on the suspension insulator string for installation on towers and conductors but in case of polymer insulators, this will pollute and scratch the housing result in durability reduction by deterioration and corona. This study developed a high strength aluminum compound metal lauder designed to work on polymer insulators without riding, and a clamp type connecting device and safety gear for easy installation on the tower and conductor. These polymer insulator work device can be used for 154kV and 345kV polymer insulators through a strength and load test to secure safety. This paper presents field usage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 한국지열·수열에너지학회논문집
• /
• 제10권2호
• /
• pp.13-18
• /
• 2014

This paper proposes an optimum pipe material (PVC vs. PE) design & selection for open loop ground heat exchangers. Heat exchange efficiency and/or workability, and the need for trench insulation were investigated by comparing EWT (cooling mode) of each system. CFD simulations for the PVC and PE pipe with the same inner diameter show similar EWT. This is because the PVC pipe has a small thickness but a low thermal conductivity as compared to the PE pipe, and thus these two properties tend to offset each other. However, a hypothetically insulated pipe led to a meaningful drop of EWT. This means pipe insulation is of importance in performance of ground heat exchangers. From analyzing climate data and system operation, it is not advantageous to insulate trench pipes due to construction difficulties and ground temperature characteristics that are seasonally varied.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.666-670
• /
• 2014

TEM Horn antenna is typically used in HPEM area. It is necessary to apply a high voltage of the antenna for radiating HPEM. Then, it is necessary to insulate essentially of applying a high voltage to the antenna. At this time, radiation pattern and gain of the TEM Antenna is changed. For this reason, it is necessary to analyze changing characteristics by using simulation. In this paper, I analyzed the radiation pattern of the antenna in accordance with the lens and insulating material. As a result, it was observed that the value of the gain is changed in accordance with the frequency. The lens is used for the antenna, the gain characteristic is improved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1309-1310
• /
• 2007

본 논문에서는 IGBT 소자 중 온저항을 낮추고 집적성을 향상시키기 위해 고안된 트렌치 게이트 IGBT의 단점인 게이트 코너에서의 전계 집중현상을 완화하기 위해 P+ 베이스 영역에 트렌치 전극을 형성하고, 트렌치 바닥면에 P+ 층을 형성한 새로운 구조를 제안하고 TSUPREM과 MEDICI 시뮬레이션을 사용하여 전기적 특성을 분석하였다. 제안한 구조를 시뮬레이션한 결과 순방향 저지시에 15% 이상의 항복전압 향상을 보였으며, 이 때 온저항 특성과 문턱전압의 변화는 없었다. 전계 분포를 3차원적 시뮬레이션을 통해 트렌치 전극 바닥에 형성된 P+ 층에 의해 전계집중이 분산되는 전계분산 효과에 의해 항복전압을 향상시킴을 확인하였다. 전계분산 효과에 의한 항복전압향상은 트렌치 게이트의 코너와 트렌치 전극의 코너의 깊이가 같을수록 두 코너 사이의 거리가 가까울수록 커짐을 시뮬레이션을 통해 확인하였다. 제안 구조는 공정상 복잡성이 야기되지만 15%이상의 항복전압향상 효과는 소자 특성 개선에서 많은 응용이 기대된다.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.87-92
• /
• 2007

As expansion of balconies at apartments has been legalized, the major function of the balconies as a thermal buffer zone is disappearing. This weakens the ability of window to insulate heat and multiplies surface condensation. Thus more and more residents require solutions to increasing surface condensation and aggravation in thermal comfort. This study intends to provide basic data by evaluating performance of triple layered Low-E windows, triple layered clear windows, double layered Low-E windows and double layered clear window used for expanded balconies and marketed within the country in terms of surface condensation and thermal environment through simulation. Results revealed that no surface condensation occurred at double layered Low-E windows and triple layered Low-E windows. Surface condensation took place at double layered clear windows and triple layered clear windows at a relative humidity of 60%. Thermal environment analysis suggested that double layered clear windows showed the most time falling into the range of comfort at $23^{\circ}C$. The figure were $22^{\circ}C$ for triple layered clear windows, $22^{\circ}C$ for double layered Low-E windows and $21^{\circ}C$ for triple layered Low-E windows.