• 암석학회지
• /
• 제25권4호
• /
• pp.325-334
• /
• 2016

한반도에서는 크고 작은 지진이 꾸준히 발생하고 있음을 역사문헌과 계기지진 관측 자료를 통해 알 수 있다. 본 연구에서는 역사지진과 계기지진 자료를 이용해 지리정보시스템(GIS)의 공간분석 결과, 북한의 평양지역이 지진으로부터 가장 위험한 지역으로 결정되었다. 평양은 북한의 수도로서 인구와 구조물의 밀집도가 높아 지진뿐만 아니라 재해로 인해 큰 위험에 처할 수 있다. 502년 평양에서 발생한 규모 6.7의 지진을 토대로 지진동 지도를 작성한 결과, 0.24 g보다 높은 지진동을 느낄 수 있는 지역이 평양지역의 약 51.1%를 차지한다. 또한 통계청 자료에 의하면 북한은 우리나라보다 재해로부터 열악한 환경에 처해 있음을 확인할 수 있었다. 이번 연구결과는 향후 북한을 포함한 우리나라의 포괄적인 지진재해예측 연구에 유용한 정보로 사용될 수 있다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.94-97
• /
• 1997

The December 13, 1996 Yeongweol earthquake of magnitude 4.5 was felt almost everywhere in southern part of the Korean Peninsula and Cheju Island, even though not feld in Tsushima Island at other places in Japan near to Korea. Production lines of semiconductor disk in electronic engineering companies of Gumi manufacturing complex were seriously affected by the shake of this earthquake. Total 17 earthquakes of magnitude 4 or above occurred within the area of 50km radius from Yeongweol in the period from the year 1400 to 1996. This group of earthquakes includes 12 events of magnitude 5.0 or above and 3 events of magnitude 6.0 or above. Among these events, 13 earthquakes are historical events of years 1400-1904. Most of them occurred in 15-16 centuries. The February 21, 1596 Jungseon-Pyeongchang event of magnitude 6.5 is the largest one up to now in the area. There are four instrumental earthquakes (years 1905-1996) of magnitude 4.0 or above in this area. An earthquake of magnitude 4.4 occurred on 5th of November, 1919 at almost the same place as the December 13, 1996 earthquake of magnitude 4.5. Thus this event is preceded with the previous one by 77 years.

• 지질공학
• /
• 제5권1호
• /
• pp.45-58
• /
• 1995

한반도의 계기지진 자료를 이용하여 확률론적 지진위험분포를 계산하였다. 이 목적을 위하여 여러 자료를 수집, 검토하여 통일성과 균질성을 갖도록 지진요소들을 재조정한 1905년 이래의 계기지진 목록을 작성하였다. 한반도에서 100년, 1000년, 4000년 동안에 발생가능한 최대 잠재지진의 규모는 극한치 이론을 적용하여 계산할 때 각각 6.3, 7.2, 7.8로 나타난다. 한편 100년, 1000년에 기대되는 최대지반가속도를 재래주기법으로 계산하여, 등치선도를 작성, 제시하였다. 또한 수개의 인구밀집지역에 대해서는 최대 가속도가 발생확률의 함수로 나타나는 지진재해예상곡선이 작성되었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.33-40
• /
• 2006

Since early 1990's, several Quaternary faults have been found in the southeastern part of the Korean peninsula with reference to fault activity. Because some of these faults could be considered a capable fault, it is a very delicate matter, which need to be deal with carefully in assessing the seismic hazard. In determining whether or not a faults are capable, because of the low rate of seismicity and insufficient relationship between instrumental macro-seismicity and fault, there has been considerable debate among geologists and geophysicists in Korea. In this study, we discuss the criteria and probabilistic approaches that are used to assess whether or not a fault is seismogenic. And, we preliminarily also suggest the probability of fault activity from the spatial association between faults and earthquake epicenters, fault slip and tectonic stress, and geological evidence for multiple episodes of reactivation.

• Earthquakes and Structures
• /
• 제15권1호
• /
• pp.1-8
• /
• 2018

A new site classification system and site coefficients based on local site conditions in Korea were developed and implemented as a part of minimum design load requirements for general seismic design. The new site classification system adopted bedrock depth and average shear wave velocity of soil above the bedrock as parameters for site classification. These code provisions were passed through a public hearing process before it was enacted. The public hearing process recommended to modify the naming of site classes and adjust the amplification factors so that the level of short-period amplification is suitable for economical seismic design. In this paper, the new code provisions were assessed using dynamic centrifuge tests and by comparing the design response spectra (DRS) with records from 2016 Gyeongju earthquake, the largest earthquake in history of instrumental seismic observation in Korea. The dynamic centrifuge tests were performed to simulate the representative Korean site conditions, such as shallow depth to bedrock and short-period amplification characteristics, and the results corroborated with the new DRS. The Gyeongju earthquake records also showed good agreement with the DRS. In summary, the new code provisions are reliable for representing the site amplification characteristic of shallow bedrock condition in Korea.

• Smart Structures and Systems
• /
• 제1권2호
• /
• pp.141-158
• /
• 2005

A new design of distributed crack sensors based on the topological change of transmission line cables is presented for the condition assessment of reinforced concrete (RC) structures during and immediately after an earthquake event. This study is primarily focused on the performance of cable sensors under dynamic loading, particularly a feature that allows for some "memory" of the crack history of an RC member. This feature enables the post-earthquake condition assessment of structural members such as RC columns, in which the earthquake-induced cracks are closed immediately after an earthquake event due to gravity loads, and are visually undetectable. Factors affecting the onset of the feature were investigated experimentally with small-scale RC beams under cyclic loading. Test results indicated that both crack width and the number of loading cycles were instrumental in the onset of the memory feature of cable sensors. Practical issues related to dynamic acquisition with the sensors are discussed. The sensors were proven to be fatigue resistant from shake table tests of RC columns. The sensors continued to show useful performance after the columns can no longer support additional loads.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.55-64
• /
• 2010

The KIER's Korean historical earthquake catalog was revised for MMI${\geq}$VI events recorded from the years 27 A.D. to 1904. the magnitude of each event was directly determined from the criteria suggested by Seo. The criteria incorporated the damage phenomena of the Japanese historical earthquake catalog, recent seismological studies, and the results of tests performed on ancient structures in Korea. Thus, the uncertainty of the magnitudes of the Korean historical earthquakes can be reduced. Also, the Gutenberg-Richter parameter values were estimated based on the revised catalog of this study. It was determined that the magnitudes of a maximum inland and minimum offshore event were approximately 6.3 and 6.5, respectively. The Gutenberg-Richter parameter pairs of the historical earthquake catalog were estimated to be a=5.32${\pm}$0.21, b=0.95${\pm}$0.19, which were somewhat lower than those obtained from recent complete instrumental earthquakes. No apparent change in the Gutenberg-Richter parameter is observed for the $16^{th}-17^{th}$ centuries of the seismically active period.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.153-184
• /
• 2015

Most damaging earthquakes come as complex sequences characterized by strong aftershocks, sometimes by foreshocks and often by multiple mainshocks. Complex earthquake sequences have enormous seismic hazard, engineering and societal implications as their impact on buildings and infrastructures may be much more severe at the end of the sequence than just after the mainshock. In this paper we examine whether historical sources can help characterizing the rare earthquake sequences of pre-instrumental times in full, including fore-, main- and aftershocks. Thanks to the its huge documentary heritage, Italy relies on one of the richest parametric earthquake catalogues worldwide. Unfortunately most current methods for assessing seismic hazard require that earthquake catalogues be declustered by removing all shocks that bear some dependency with those identified as mainshocks. We maintain that this requirement has led most modern historical seismologists to focus mainly on mainshocks rather than also on the fore- and aftershocks. To shed light onto major earthquake sequences of the past, rather than onto individual mainshocks, we investigated 10 damaging earthquake sequences ($M_w$ 4.7-7.0) that hit the L'Aquila area and central Abruzzo from the 14th to the 20th century. We find that most of the results of historical research are important for modern seismology, yet their rendering by the current parametric catalogues causes most information to be lost or not easily transferred to the potential users. For this reason we advocate a change in current strategies and the creation of a more flexible standard for storing and using all the information made available by historical seismology.

• 한국지진공학회논문집
• /
• 제25권2호
• /
• pp.59-69
• /
• 2021

Historical records of earthquakes are generally used as a basis to extrapolate the instrumental earthquake catalog in time and space during the probabilistic seismic hazard analysis (PSHA). However, the historical catalogs' input parameters determined through historical descriptions rather than any quantitative measurements are accompanied by considerable uncertainty in PSHA. Therefore, quantitative assessment to verify the historical earthquake parameters is essential for refining the reliability of PSHA. This study presents an approach and its application to constrain reliable ranges of the magnitude and corresponding epicenter of historical earthquakes. First, ranges rather than specific values of ground motion intensities are estimated at multiple locations with distances between each other for selected historical earthquakes by reviewing observed co-seismic natural phenomena, structural damage levels, or felt areas described in their historical records. Based on specific objective criteria, this study selects only one earthquake (July 24, 1643), which is potentially one of the largest historical earthquakes. Then, ground motion simulations are performed for sufficiently broadly distributed epicenters, with a regular grid to prevent one from relying on strong assumptions. Calculated peak ground accelerations and velocities in areas with the historical descriptions on corresponding earthquakes are converted to intensities with an empirical ground motion-intensity conversion equation to compare them with historical descriptions. For the ground motion simulation, ground motion prediction equations and a frequency-wavenumber method are used to consider the effects of possible source mechanisms and stress drop. From these quantitative calculations, reliable ranges of epicenters and magnitudes and the trade-off between them are inferred for the earthquake that can conservatively match the upper and lower boundaries of intensity values from historical descriptions.

• 지구물리와물리탐사
• /
• 제20권3호
• /
• pp.185-192
• /
• 2017

2016년 9월 12일 규모 5.8의 본진을 포함한 일련의 지진들이 경주에서 발생했다. 본진은 1905년 한반도에서 지진관측을 시작한 이래 반도 남부에서 발생한 최대의 지진으로서 양산단층이 명백한 활성단층임을 입증하였다. 콘래드 불연속면이 없는 단층의 한반도 지각 모델에 의한 경주지진들의 전진, 본진, 여진들의 평균깊이는 12.9 km로 콘래드 불연속면이 있는 2층 구조의 IASP91 모델에 의한 평균깊이보다 2.8 km 낮다. 경주지역에서 발생한 역사지진 및 계기지진들의 진앙분포는 주 단층인 양산단층과 부속 단층을 포함하는 양산단층계가 광범위한 파쇄대임을 시사한다. 규모 5.8의 경주지진에 수반한 지진들의 진앙분포는 양산단층계의 몇 단층들이 응력에너지의 방출에 관여하였음을 지시한다. 경주지진들의 주요 지진들이 지표가 아닌 10 km 이하에서 발생한 것은 양산단층계의 심부 활성단층들의 분포를 연구할 필요성을 제기한다. 경주지역의 지진자료에 근거하여 추정한 이 일대의 최대지진의 규모는 7.3이다. 한반도의 가장 완전한 1978년 이후의 지진자료를 이용하여 추정한 경주지역의 규모 5.0, 6.0, 7.0을 초과하는 지진들의 재현간격은 각기 80년, 670년, 그리고 5,900년이다. 2016년 9월 경주지진들은 본질적으로 판내부지진활동의 범주에 속하며 2011년 3월 11일 일본해구에서 발생한 판경계지진횔동인 동일본대지진과는 무관하다.