• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2057-2066
• /
• 1996

^In this paper, diagnostic technique for detecting the engine faults, especially misfire, are introduced and compared with each other under the same conditions. With all of them the instantaneous angular velocitys, measured at the flywheel, were analyzed. The techniques include the frequency analysis, auto-correlation function, velocity index, acceleration index, maximum acceleration index, and integrated torque index. Since the main driving components for the angular velocity fluctuation are both the pressure and the inertia torque, the component of the inertia torque in it must be excluded to extract the information of the combustion from the angular velocity. To do this, it is required to consider only the first half of the combustion period in the angular velocity fluctuations, which has never been proposed in the existing methods. On the basis of this fact, the results show that the most effective diagnostic technique is maximum acceleration index.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.448-448
• /
• 2018

In this study, the regression models (Load ESTimator and eight-parameter model) were evaluated to estimate instantaneous pollutant loads under various criteria and optimization methods. As shown in the results, LOADEST commonly used in interpolating pollutant loads could not necessarily provide the best results with the automatic selected regression model. It is inferred that the various regression models in LOADEST need to be considered to find the best solution based on the characteristics of watersheds applied. The recently developed eight-parameter model integrated with Genetic Algorithm (GA) and Gradient Descent Method (GDM) were also compared with LOADEST indicating that the eight-parameter model performed better than LOADEST, but it showed different behaviors in calibration and validation. The eight-parameter model with GDM could reproduce the nitrogen loads properly outside of calibration period (validation). Furthermore, the accuracy and precision of model estimations were evaluated using various criteria (e.g., $R^2$ and gradient and constant of linear regression line). The results showed higher precisions with the $R^2$ values closed to 1.0 in LOADEST and better accuracy with the constants (in linear regression line) closed to 0.0 in the eight-parameter model with GDM. In hence, based on these finding we recommend that users need to evaluate the regression models under various criteria and calibration methods to provide the more accurate and precise results for pollutant load estimations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.909-914
• /
• 2006

The goal of this study was to investigate the behavior of sows and their piglets reared using the non-all-in all-out system and the all-in all-out system during a 3-week lactation period. The 24 Landrace${\times}$Yorkshire sows (range of parity: 2 to 4) and their litters (range of litter size: 8 to 13 piglets) for each treatment (8 sows/replication) were used in this experiment. The sows were housed in farrowing crates ($0.6{\times}2.1m$) located in pens ($2.4{\times}1.8m$) with totally perforated metal flooring. The crates were kept in an experimental room that was thermostatically controlled to approximately $23^{\circ}C$. A 250-W infrared heat lamp was turned on above the creep area during lactation. The sows and piglets were conventionally managed. The animals were recorded during a 24-h period at 1, 4, 7, 14 and 21 days postpartum. The videotapes were scanned every minute to obtain an instantaneous behavioral sample. In the behaviors of sows, lateral recumbency decreased and ventral recumbency increased from 1 day postpartum to 21 days postpartum. In comparison to the AIAOS, sows in the NAIAOS spent much less time on lateral recumbency (p<0.01), whereas they spent much more time on ventral recumbency and sitting at 4 days postpartum (p<0.05 and p<0.05). In the behaviors of piglets, lying increased and unsuccessful suckling decreased until 21 days postpartum. Compared to the AIAOS at 4 days postpartum, piglets in the NAIAOS spent less time lying (p<0.01), whereas they spent much more time walking and unsuccessful suckling (p<0.01 and p<0.05). These results suggest that the all-in all-out system may be preferable to the non-all-in all-out system for promoting welfare.

• 디지털융복합연구
• /
• 제16권12호
• /
• pp.335-342
• /
• 2018

포털 사이트의 핵심 서비스인 검색서비스는 입력되는 검색어 중에서 짧은 순간에 급상승하는 검색어를 대상으로 순간 검색빈도가 높은 것을 기준으로 순위별로 제시하는 것이므로 일정기간 동안 관심도가 높은 검색어를 곧바로 알려주기는 힘들다. 따라서 이를 극복하고 검색어 변화에 대한 향상된 분석결과가 나오게 하여 보다 지능적인 정보검색 서비스를 제공하기 위한 노력이 필요하다. 이를 위하여 본 논문에서는 실시간검색어의 관심도와 지속도, 그리고 주목도를 측정할 수 있는 기준을 제시한다. 그리고 그 기준에 맞추어 일정기간 동안 시간, 일간, 주간, 월간 실시간검색어에 대한 변화의 측정과 집계를 하고 이를 통해 관심도가 높은 이슈, 관심이 길게 지속된 이슈, 변화가능성이 커서 앞으로 주목해야 할 이슈를 평가한다.

• 한국수산과학회지
• /
• 제21권4호
• /
• pp.206-216
• /
• 1988

키조개, Atrina(Servatrina)pectinata의 효율적인 종묘생산기술개발을 목적으로 1986년 6월 8일부터 10월 16일까지 진해만내의 칠천도 연구리 앞바다에서 부유유생의 출현시기와 각 유생단계별 생존율을 조사하고, 1987년 7월 6일부터 11월 23일까지는 연구리 앞바다에서, 1987년 7월 9일부터 1988년 2월 15일까지는 여자만에서 각각 수직식 및 수평식 채묘실험을 하였다. 부유유생 조사기간중 크기가 약 $135\times144um$인 D형유생은 8월 1일, 8월 12일, 8월 25일에 각각 출현 peak가 있었으며, $300\times317um$인 umbo형유생은 8월 9일, 8월 22일, 9월 4일에, $468\~450um$의 성숙 유생은 8월 22일, 9월 3일, 9월 16일에 각각 peak가 있었다. D형유생에서 umbo형유생으로 되는데는 약 $9\~10$일 걸렸으며, 순간생존율(survival rate/day)은 0.94, 전생존율은 $54\%$였다. umbo형유생에서 성숙유생으로 되는데는 약 $12\~14$ 일 걸렸으며 순간생존율은 0.08, 전생존율은 약 $19\%$였다. D형유생은 발생에서 채묘의 대상이 되는 성숙유생으로 되는데는 약 $22\~23$일 걸렸으며 이 기간 중 전생존율은 약 $10\%$였다. 치패의 부착밀도는 연구리 앞바다의 수직식 채묘기에서 0.16개체/$m^2$이었으며, 여자만 수역의 수평식 채묘기에서 0.48개체/$m^2$이었다. 부착치패의 평균갑장은 1987년 9월 27일 $0.51({\pm}0.15)\;mm$, 11월 21일, $38.52({\pm}6.98)\;mm$, 1988년 2월 15일에는 $49.00({\pm}10.77)\;mm$였다. 각장(SL)에 대한 각고(SH)의 관계식은, SH=0.4749 SL-0.5893 (r=0.9651) 각장(SL)에 대한 전중(TW)의 관계식은, $$TW=0.0700\;SL^{2.6772}\times10^{-3}(r=0.9780)$$. 전중(TW)에 대한 육중(MW)의 관계식은, MW=0.4913 TW-0.1228 (r=0.9809)이었다.

• Earthquakes and Structures
• /
• 제12권4호
• /
• pp.397-407
• /
• 2017

To estimate the structural seismic demand, some methods are based on an equivalent linear system such as the Capacity Spectrum Method, the N2 method and the Equivalent Linearization method. Another category, widely investigated, is based on displacement correction such as the Displacement Coefficient Method and the Coefficient Method. Its basic concept consists in converting the elastic linear displacement of an equivalent Single Degree of Freedom system (SDOF) into a corresponding inelastic displacement. It relies on adequate modifying or reduction coefficient such as the inelastic deformation ratio which is usually developed for systems with known ductility factors ($C_{\mu}$) and ($C_R$) for known yield-strength reduction factor. The present paper proposes a rational approach which estimates this inelastic deformation ratio for SDOF bilinear systems by rigorous nonlinear analysis. It proposes a new inelastic deformation ratio which unifies and combines both $C_{\mu}$ and $C_R$ effects. It is defined by the ratio between the inelastic and elastic maximum lateral displacement demands. Three options are investigated in order to express the inelastic response spectra in terms of: ductility demand, yield strength reduction factor, and inelastic deformation ratio which depends on the period, the post-to-preyield stiffness ratio, the yield strength and the peak ground acceleration. This new inelastic deformation ratio ($C_{\eta}$) is describes the response spectra and is related to the capacity curve (pushover curve): normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), natural period (T), peak ductility factor (${\mu}$), and the yield strength reduction factor ($R_y$). For illustrative purposes, instantaneous ductility demand and yield strength reduction factor for a SDOF system subject to various recorded motions (El-Centro 1940 (N/S), Boumerdes: Algeria 2003). The method accuracy is investigated and compared to classical formulations, for various hysteretic models and values of the normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), and natural period (T). Though the ductility demand and yield strength reduction factor differ greatly for some given T and ${\eta}$ ranges, they remain take close when ${\eta}>1$, whereas they are equal to 1 for periods $T{\geq}1s$.

• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.574-587
• /
• 2022

This study was performed to development the alternative farrowing pen (AFP) and to investigate performance and behavior of lactating sows and their litter. A total of 64 multiparous sows were randomly divided into two groups and were allocated to farrowing crates (FCs) and AFPs. The AFPs contained a crate and support bars that could be folded to provide the sows with extra space on day 5 postpartum. Behavior was recorded by charge-coupled device cameras and digital video recorders, and the data were scanned every 2 min to obtain an instantaneous behavioral sample. Farrowing systems did not affect feed intake, back-fat thickness, litter size and piglet weight at birth and weaning (p > 0.05). In addition, there were no differences in the number of crushed piglets between the two farrowing systems (p > 0.05). However, the weaning-to-estrus interval was shorter in the sows of the AFPs than in thous of the FCs (p < 0.05). The sows spent most of their time lying down during the lactating period, at about 80% lateral recumbency and 10%-15% ventral recumbency. The only significant differences were in the feeding and drinking behavior between sows in the two farrowing systems (p < 0.05). The FC sows displayed more feeding and drinking behavior than the AFP sows, especially in the late lactating period (p < 0.05). Piglets in the FCs tended to spend more time walking than piglets in the AFPs (p < 0.05), whereas there were no differences in suckling and lying behavior between piglets in the two farrowing systems (p > 0.05). It is concluded that the AFPs with temporary crating until day 4 postpartum did not negatively affect performance and crushed piglet compared with the FCs. It also may improve animal welfare by allowing sows to move and turn around during the lactating period. Further research is needed to find suitable housing designs to enhance productivity and animal welfare.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.246-255
• /
• 2011

본 연구는 2010년 9월 2일 강한 바람으로 우리나라 중부 지방에 영향을 미친 제7호 태풍 곤파스로 인해 피해를 입은 홍릉수목원 내 풍도목을 대상으로 풍도목의 특징, 임내 외 풍향 및 풍속의 특징을 구명하고자 실시하였다. 풍도목은 피해 유형에 따라 바람에 쓰러진 나무, 기울어진 나무, 수간이 부러진 나무 등 크게 세 가지로 구분하여 조사하였다. 바람이 불기 시작한 9월 2일 04시부터 바람이 완전히 멎은 12시까지의 풍속을 분석한 결과, 임내 평균풍속과 순간최대풍속은 각각 1.4 m/s와 3.5 m/s 이었으며, 06시 10분 임내 평균풍속과 순간최대풍속이 각각 3.4 m/s와 8.7 m/s로 최고치를 기록하였다. 곤파스의 피해를 받은 2010년 9월 2일과 강풍주의보가 발효되었던 과거 5일(2009년 2월 13일, 2월 20일, 4월 21일, 10월 16일, 2010년 3월 20일)의 평균풍속 차이와 파동을 비교 분석한 결과, 풍도목 발생 원인은 바람의 세기보다는 단위시간당 바람파동횟수와 관련이 깊은 것으로 사료된다. 풍향 분석 결과 임내 평균풍향은 방위각 $112.5^{\circ}{\sim}180^{\circ}$(ESE-SE-SSE-S)와 $247.5^{\circ}$(WSW) 방향에서 불어 들어왔으며, 임내 외 순간 최대풍향 모두 방위각 $157.5^{\circ}$(SSE) 방향에서 강하게 불어 들어왔다. 풍도목의 도복 방향과 위치를 분석한 결과 84.0%의 풍도목이 방위각 $270^{\circ}{\sim}22.5^{\circ}$(W-WNW-NW-NNW-N-NNE) 방향으로 쓰러졌으며, 97.3%의 풍도목이 완경사지(경사 $15^{\circ}$ 미만)와 경사지(경사 $15^{\circ}{\sim}20^{\circ}$)에서 발생하였다. 풍도목 중 침엽수가 45.3%를 차지했고, 활엽수가 54.7%를 차지하였으나, 임상별로 보면 풍도목은 활엽수림보다 침엽수림과 혼효림에서 주로 발생한 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.165-175
• /
• 2015

Energy storage system has been widely applied in power distribution sectors as well as in renewable energy sources to ensure uninterruptible power supply. This paper presents a model predictive algorithm to control a bidirectional AC-DC converter, which is used in an energy storage system for power transferring between the three-phase AC voltage supply and energy storage devices. This model predictive control (MPC) algorithm utilizes the discrete behavior of the converter and predicts the future variables of the system by defining cost functions for all possible switching states. Subsequently, the switching state that corresponds to the minimum cost function is selected for the next sampling period for firing the switches of the AC-DC converter. The proposed model predictive control scheme of the AC-DC converter allows bidirectional power flow with instantaneous mode change capability and fast dynamic response. The performance of the MPC controlled bidirectional AC-DC converter is simulated with MATLAB/Simulink(R) and further verified with 3.0kW experimental prototypes. Both the simulation and experimental results show that, the AC-DC converter is operated with unity power factor, acceptable THD (3.3% during rectifier mode and 3.5% during inverter mode) level of AC current and very low DC voltage ripple. Moreover, an efficiency comparison is performed between the proposed MPC and conventional VOC-based PWM controller of the bidirectional AC-DC converter which ensures the effectiveness of MPC controller.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.50-56
• /
• 2012

This study investigates flow fields and energy dissipation due to regular wave interaction with a perforated vertical breakwater, through velocity data measurement in a two-dimensional wave tank. As the waves propagate through the perforated breakwater, the incoming wave energy is reflected back to the ocean, dissipated due to very turbulent flows near the perforations and inside the chamber, and transmitted through the perforations of the breakwater. This transmitted energy is further reduced due to the presence of the perforated back wall. Hence most of the energy is either reflected or dissipated in the vicinity of the structure, and only a small amount of the incoming wave energy is transmitted through the structure. In this study, particle image velocimetry (PIV) technique was employed to measure two-dimensional instantaneous velocity fields in the vicinity of the structure. Measured velocity data was treated statistically, and used to calculate mean flow fields, turbulence intensity and turbulent kinetic energy. For investigation of the flow pattern, time-averaged mean velocity fields were examined, and discussed using the cross-sections through slot and wall for comparison. Flow fields were obtained and compared for various cases with different regular wave conditions. In addition, turbulent kinetic energy was estimated as an approach to understand energy dissipation near the perforated breakwater. The turbulent kinetic energy was distributed against wave height and wave period to see the dependence on wave conditions.