• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1115-1121
• /
• 2017

초기 추력을 증가시키기 위하여 넓은 초기 연소 면적을 가지는 고체 로켓 모타를 설계하고 지상연소 시험을 수행하였다. 그 결과 연소 거리에 따른 연소 면적 변화를 고려한 내탄도 성능 예측에 비하여 초기 압력과 추력이 낮게 측정되었다. 연소실 내부 유속과 연소 거리에 따른 연소 속도 변화를 검토한 결과 압력에 의하여 결정되는 연소 속도 대비 연소 속도가 감소하는 negative erosive burning이 발생함을 확인하였다. 또한 8개의 대칭형 fin 형상을 적용하여 radial mode의 연소 불안정이 발생함을 확인하였으며 fin의 배치를 변경하여 대칭성을 제거함에 따라 연소 불안정이 억제되었음을 확인하였다.

• 대한정형도수물리치료학회지
• /
• 제27권1호
• /
• pp.13-20
• /
• 2021

Background: The serratus anterior and upper trapezius muscles act synergistically to allow for an appropriate scapulothoracic rhythm. However, a decrease in serratus anterior activation causes the upper trapezius to become overactivated, resulting in dysfunction. This study compared serratus anterior and upper trapezius muscle activity according to sling angle and compared serratus anterior strength between healthy adults and patients with shoulder instability. Methods: Twenty participants (10 healthy adults and 10 patients with shoulder instability) were included in this study. The participants had their arms extended at sling angles of 30°, 60°, and 90° in reach forward with shoulder flexion using goniometer. Serratus anterior strength was measured three times while the participants were supine. The outcome measures were surface electromyography amplitude of the upper trapezius and serratus anterior and serratus anterior strength. Results: The Wilcoxon signed-rank test indicated that the upper trapezius was significantly different between healthy group and shoulder instability group at a sling angle of 60°, and both the upper trapezius and serratus anterior exhibited significant differences at 90°. Moreover, a significant difference was noted in the muscle strength of the serratus anterior. Conclusion: Our results provide novel and promising clinical evidence that patients with shoulder instability have decreased serratus anterior activation and upper trapezius overactivation, resulting in muscle imbalance. In addition, there was a significant difference between the healthy group and shoulder instability group in the serratus anterior muscle strength

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.697-702
• /
• 2006

The change in the critical speed due to surface temperature of automotive disk brakes may be analyzed both theoretically as well as experimentally. Juddering of disk brakes is closely related to its critical speed. In analyzing the critical speed, if $\sigma$ is positive, Disk develops TEI(Thermo-Elastic Instability) resulting in juddering in disk brakes. And $\sigma$ is affected not only by the critical speed but also by the initial temperature of disk surface. As the initial temperature of the disk surface rises, the critical speed decreases and juddering is developed more easily. Also, when hot spots are developed by TEI, they show large temperature difference in small local range.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.19-27
• /
• 2018

It follows from the basic principles of mechanics of deformable solids relating to the strength, stability and propagation of elastic waves that the Earth's inner core cannot exist in the form of a spherical structure in the assumed thermobaric conditions and calculation values of physico-mechanical parameters. Pressure level reaches a value that is significantly greater than the theoretical limit of medium strength in the model approximations at the surface of the sphere of the inner core. On the other hand, equilibrium state of the sphere is unstable on the geometric forming at much lower loads under the influence of the "dead" surface loads. In case of the action of "follower" loads, the assumed pressure value on the surface of the sphere is comparable with the value of the critical load of "internal" instability. In these cases, due to the instability of the equilibrium state, propagation of homogeneous deformations becomes uneven in the sphere. Moreover, the elastic waves with actual velocity cannot propagate in such conditions in solid medium. Violation of these fundamental conditions of mechanics required in determining the physical and mechanical properties of the medium should be taken into account in the integrated interpretations of seismic and laboratory (experimental) data. In this case, application of the linear theory of elasticity and elastic waves does not ensure the reliability of results on the structure and composition of the Earth's core despite compliance with the required integral conditions on the mass, moment of inertia and natural oscillations of the Earth.

• 대한통합의학회지
• /
• 제2권1호
• /
• pp.101-108
• /
• 2014

Purpose : The purpose of this study was to investigate the effect of horse riding exercise for chronic low back pain patients. Method : 30 subjects in H-equestrian and N-equestrian, K & B hospital were randomly divided two group, instability support surface exercise group and horse-riding exercise group. Each group carried out 40 minutes exercise three times a week for 8 weeks. VAS were measured for sway path of COP movement during standing were measured for evaluation of static balance ability in balance performance monitor(BPM). Result : The results were as follows, scales of VAS between instability support surface exercise and horse-riding exercise groups in post-test, were significantly different in measures(p<.05). And there were significant in two group after exercise(p<.05). The static balance scales of sway path between instability support surface exercise and horse-riding exercise groups in post-test, were significantly different in measures(p<.05). And there were significant in two group after exercise(p<.05). Conclusion : These finding revealed that horse-riding exercise was effective on VAS and static balance abiility of chronic low back pain patient so that these exercise can be new altematives for increase of stability ability in chronic low back pain patients.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.734-741
• /
• 2020

A new air-cooled waste heat removal system with a direct contact heat exchanger was designed for SMRs requiring 200 MW of waste heat removal. Conventional air-cooled systems use fin structure causing high thermal resistance; therefore, a large cooling tower is required. The new design replaces the fin structure with a vertical string type direct contact heat exchanger which has the most effective performance among tested heat exchangers in a previous study. The design results showed that the new system requires a cooling tower 50% smaller than that of the conventional system. However, droplet formation on a falling film along a string caused by Rayleigh-Plateau instability decreases heat removal performance of the new system. Analysis of Rayleigh-Plateau instability considering drag force on the falling film surface was developed. The analysis results showed that the instability can be prevented by providing thick string. The instability is prevented when the string radius exceeds the capillary length of liquid by a factor of 0.257 under stagnant air and 0.260 under 5 m/s air velocity.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1774-1783
• /
• 1998

The transition from steady laminar to chaotic convection in a glass melting furnace specified by upper surface temperature distribution has been studied by the direct numerical analysis of the two and three-dimensional time dependent Navier-Stokes equations. The thermal instability of convection roll may take place when modified Rayleigh number($Ra_m$) is larger than $9.71{\times}10^4$. It is shown that the basic flows in a glass melting furnace are steady laminar, unsteady periodic, quasi-periodic or chaotic flow. The dimensionless time scale of unsteady period is about the viscous diffusion time, ${\tau}_d=H^2/{\nu}_0$. Through primary and secondary instability analyses the fundamental unsteady feature in a glass melting furnace is well defined as the unsteady periodic or weak chaotic flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2524-2529
• /
• 2008

The thermal system like a combustion chamber is believed to experience a significant instability problem with vibration in case that the thermal energy or the acoustic energy are transformed into a different form through a relevant path. This study deals with a numerically- predicted, Thermoacoustic instability in a Rijke tube by using a non-linear model for a heat source. The heating part where the energy transformation occurs actively is modeled after simulating two-dimensional cylinder case with constant surface temperature, and a nonlinear model that accounts for the transfer function of magnitude- and phase-characteristics is properly implemented so as to be dependent on the pulsation strength in the tube. The heat source model is observed to result in equivalent Thermoacoustic instabilities in the Rijke tube except low flow-rate cases in which the natural convection is dominant.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.319-324
• /
• 2020

전기와류 불안정성은 전기투석 장치, 갈바니 전지, 전해 전지 등의 이온-선택성 이동 현상계에서 발견되는 비선형 이동 현상이다. 이 불안정성은 이온-선택성 표면 근처 공간 전하층의 요동에 의해 발생하며, 불안정성의 발현은 물질 전달 속도를 증가시켜 준다. 따라서 전기와류 불안정성은 물질 전달 측면에서 중요한 의미를 가진다. 최근의 실험적 기법들이 불안정성의 직접적 가시화를 가능하게 해주었으나, 실험적 한계점에 의해 불안정성의 원론적 연구는 제한된 영역에서만 이루어지고 있다. 본 연구에서는 일정 전위 모드에서의 전기와류 불안정성에 대한 수치 해석을 진행하여 전류-시간 곡선과 불안정성의 거동 간의 상관관계를 밝히고자 하였다. 시간-분해 해석을 통하여, 불안정성의 발달 거동을 SCL 형성 - 전기와류 불안정성의 성장 - 정상 상태 도달로 구분 지었다. 더불어, 인가 전위에 따른 전이 시간들의 크기 법칙 또한 수치적으로 유도하였다.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1582-1590
• /
• 1998

Combustion-driven oscillations in a surface burner have been investigated to clarify their characteristics. A model combustor is made and the oscillation frequencies are measured for various dimensions of the combustor. It is found that there are two modes of oscillations; one is the 'acoustic mode' at high frequencies, associated with the acoustic mode of the combustion system and the other is the 'combustion mode' at low frequencies around 100 Hz, associated with the instability of the flame. Acoustic mode is excited when the surface burner is placed where the phase of particle velocity leads that of acoustic pressure by $90^{\circ}$, for all the combustion conditions. Combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. Combustion mode is greatly influenced by the inlet temperature of the premixed gas. When the inlet temperature is very high, the combustion mode does not occur.