• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1298-1307
• /
• 2017

The constant on-time current-mode controlled (COT-CMC) switching dc-dc converter is stable, with no subharmonic oscillation in its current loop when a voltage ripple in its outer voltage loop is ignored. However, when its output capacitance is small or its feedback gain is high, subharmonic oscillation may occur in a COT-CMC buck converter with a proportional-integral (PI) compensator. To investigate the subharmonic instability of COT-CMC buck converters with a PI compensator, an accurate reduced-order asynchronous-switching map model of a COT-CMC buck converter with a PI compensator is established. Based on this, the instability behaviors caused by output capacitance and feedback gain are investigated. Furthermore, an approximate instability condition is obtained and design-oriented stability boundaries in different circuit parameter spaces are yielded. The analysis results show that the instability of COT-CMC buck converters with a PI compensator is mainly affected by the output capacitance, output capacitor equivalent series resistance (ESR), feedback gain, current-sensing gain and constant on-time. The study results of this paper are helpful for the circuit parameter design of COT-CMC switching dc-dc converters. Experimental results are provided to verify the analysis results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.62-73
• /
• 2022

This research proposes a method to control combustion instability in a gas turbine combustor having an annular combustor form and compares the effect of flow symmetric braking through nozzle arrangement and the corresponding change in equivalent ratio. To this end, the symmetry breaking effect was confirmed through mode analysis of FFT, Time signal, and phase trajectory. In addition, the unstable area and the stable area were identified through mode analysis, and this was shown on the contour map. The present research shows that instability occurs when the equivalent ratio and the arrangement of the nozzles are symmetry or when the nozzles are continuously arranged, but if the arrangement and equivalent ratio are not symmetry, the combustion instability decreases dramatically even if the difference in the equivalent ratio is small.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.109-118
• /
• 2023

In this paper, the evaluation method of fluidelastic instability (FEI) of newly designed steam generator tubing in pressurized water reactor (PWR) nuclear power plants is discussed. To obtain the parameters for prediction of the critical velocity of FEI for steam generator tubes, experimental research is carried out, and the design parameters are determined. Using CFD numerical simulation, the tube array scale of the model experiment is determined, and the experimental device is designed. In this paper, 7 groups of experiments with void fractions of 0% (water), 10%, 20%, 50%, 75%, 85% and 95% were carried out. The critical damping ration, fundamental frequency and critical velocity of FEI of tubes in flowing water were measured. Through calculation, the total mass and instability constant of the immersed tube are obtained. The critical damping ration measured in the experiment mainly included two-phase damping and viscous damping, which changed with the change in void fraction from 1.56% to 4.34%. This value can be used in the steam generator design described in this paper and is conservative. By introducing the multiplier of frequency and square root of total mass per unit length, it is found that the difference between the experimental results and the calculated results is less than 1%, which proves the rationality and feasibility of the calculation method of frequency and total mass per unit length in engineering design. Through calculation, the instability constant is greater than 4 when the void fraction is less than 75%, less than 4 when the void fraction exceeds 75% and only 3.04 when the void fraction is 95%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.507-513
• /
• 2021

The purpose of this study is to understand the effects of adolescents' emotional control strategies on emotional instability and stress. Study subjects included 124 adolescents from Ulsan city. Frequency analysis, reliability analysis, and correlation analysis were performed using the SPSS 22.0 program, and multiple regression analysis was performed on the causal relationships between variables. First, as a result of examining the effect of adolescents' emotion control strategies on job burnout, it was found that emotion-centered strategy, a sub-factor of emotion control strategy, had a significant effect on emotional instability. On the other hand, it was found that cognitive-oriented strategy factors did not significantly affect emotional instability. Second, as a result of examining the effect of emotion control strategies on stress, it was found that emotion-centered strategies, a sub-factor of emotion control strategy, had a significant negative (-) effect on stress. On the other hand, it was found that cognitive-oriented strategy factors did not significantly affect stress. These results imply that higher emotion-centered strategies lead to lower emotional instability and stress. This study provides basic data for preparing plans to reduce the emotional instability and stress of adolescents.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1205-1210
• /
• 2011

Spinal instability known to be related to low back pain. However, the quantitative definition of spinal instability has not been established because there is a lack of consensus regarding clinical and radiological studies. In addition, the major factors affecting such instability have not been elucidated, although disc degeneration, disc injury, ligament injury, and isthmic defects are considered to result in such problems. In this study, individual and combined influences on spinal instability with a three-dimensional finite element model of a one-level lumbar spinal motion segment were investigated, under the assumption that the rotation and translation in the sagittal plane under flexion and extension represented the instability indices. The results could be helpful in understanding the causes and mechanisms of spinal instability in the lumbar spine.

• The Journal of Korean Physical Therapy
• /
• v.34 no.3
• /
• pp.91-97
• /
• 2022

Purpose: This study investigated the short-term effectiveness of extracorporeal shock wave therapy (ESWT) on pain, the ankle instability, the ankle function, dorsiflexion range of motion (ROM), and dynamic balance in patients with chronic ankle instability (CAI). Methods: Eighteen participants were divided into an experimental (n=9) and control group (n=9). The ESWT in the experimental group was applied to the lateral collateral ligament in combination with the tibialis anterior whereas the ESWT was applied to the lateral collateral ligament of the ankle alone in the control group. Pain, the ankle instability, the ankle function, dorsiflexion ROM, and dynamic balance were measured using the Visual analog scale, Cumberland ankle instability tool, American Orthopedic Foot and Ankle Society ankle-hindfoot score, weight-bearing lunge, and Y-balance test, before and after ESWT intervention. Results: Significant interactions (group × time) and time effects were observed in the dorsiflexion ROM and dynamic balance. Bonferroni's post-hoc analysis showed that the experimental group revealed a more significant change in dorsiflexion ROM and dynamic balance than the control group. There was a significant time effect in the pain, the ankle instability, and the ankle function, but no significant interaction (group × time) was observed. Conclusion: The ESWT could improve the pain, ankle instability, ankle function, dorsiflexion ROM, and dynamic balance in patients with CAI. Furthermore, the ESWT combined with lateral ankle ligaments and tibialis anterior more improves the dorsiflexion ROM and dynamic balance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.119-133
• /
• 1996

A wave equation and a comprehensive linear combustion model are developed for ramjet and afterburner combustion instability predictions. Modal analysis is used to develop general results for frequencies and damping factors and examples of their applications are given.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.1
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.168-175
• /
• 2021

Objective: To investigate the static and dynamic analysis of ankle joint complex between subjects with chronic ankle instability (CAI) and healthy controls. Method: A total of 38 subjects and CAI group (N=19) and healthy control (N=19) participated in this first study. Variables that were measured in this study were as follows: 1) Subtalar joint axis inclination and deviation 2) Rearfoot angle 3) Navicular drop test 4) Heel alignment view in alignment analysis. Intra Correlation Coefficient (ICC) is used for reliability. A secondary 17 subjects are recruited including 9 of CAI and healthy for gait analysis between group. Lower extremity sagittal, frontal, and transverse kinematics were measured. All data were analyzed to ensemble curve analysis. Results: 1) There were statistically significant differences in standing rearfoot, navicular drop, heel alignment view, subtalar joint (STJ) inclination and deviation. 2) Only in sagittal, meaningful difference is showed during walking in gait analysis. Conclusion: Morphological problem can affect ankle sprain in aspect of structure with no relation to compensation of neuromuscular.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.1
• /
• pp.129-146
• /
• 2014

This paper investigates how industrial diversity affects unemployment and employment instability from the perspective of the regional economy. Through this analysis, we examine how the industry-specific policy to promote some industry strategically in most of areas affects the stability of the regional economy. We measure Herfindahl indexes using the 1993-2010 data of 16 regions in Korea, and use panel regression model for empirical analysis. The main results from this empirical analysis are summarized as follows. First, we confirm that the industrial structure of most regions has been changed to the direction of specialization in 1990s and to the direction of diversification in 2000s through analyzing the changes in the values of Herfindahl indexes during the given period. Second, we find from the estimation results of panel regression model that the higher industrial diversity in most of regions is, the lower the unemployment rate is. However, a statistically significant relationship between industrial diversity and employment instability only partially confirmed. Third, there exist high unemployment rate and employment instability in most metropolitan areas, but it is hard to say that this relationship is highly statistically significant. From the results of the empirical analysis, it is likely that the industry-specific policies such as the regional strategic industry development policies unlike policy goals make the unemployment rate to rise and economic instability to increase. From the viewpoint of employment aspects, the strategies to increase industrial diversity would be desirable rather than those to specialize in the industrial structure.