• 한국의류학회지
• /
• 제37권8호
• /
• pp.1060-1074
• /
• 2013

This study measured and analyzed pressure at each measurement part of imported compression stockings sold in Korea to provide basic information to establish a pressure standard and grade ranking. This study used 40 medical compression stockings imported from 6 countries. Pressure measurements were taken at 11 points: front side and back side of ankle, end-point of the gastrocnemius muscle, front, inner side, back, and outer side of calf, back side of below knew girth, inner side, and outer side of mid-thigh girth, and inner side of thigh girth. AMI 3037-10 and AMI 3037-2 were used for measurements taken inside an environmental chamber at a temperature of $21^{\circ}C$ and a relative humidity (RH) of 65%. For the measurements, 11 air pack sensors were attached to a wooden model leg (Hohenstein) and three measurements were taken at each measurement point in three minutes. The average of these measurements was used for analysis. The findings of this study were as follows. As for the front side of the ankle, of the 40 products, 14 products (6 USA, 2 Swiss, 3 Italian, and 2 Taiwanese) were within the pressure range indicated on the product label; however, no German products fell within the pressure range. A total of 8 products (5 USA, 1 Swiss, 1 Italian, and 1 German) were gradient compression type; however, no Japanese or Taiwanese product were of this type. The majority of products had the highest pressure at the end-point of the gastrocnemius muscle. Only 3 products, 1 USA (Jobst Opaque 30-40mmHg), 1 Swiss (Sigvaris Cotton 34-46mmHg) and 1 Italian (Jobstocking 25-32mmHg), had measurements that met the indicated standard pressure, were a gradient compression type, and met the overall standard for compression stockings.

• 한국지역사회생활과학회지
• /
• 제22권3호
• /
• pp.485-491
• /
• 2011

This study was to present the preferred and the suggested indoor temperature of college students in winter based on their body composition. A total of 14 subjects(6 males and 8 females) participated in this study. They sat in a climatic chamber controlled at $24^{\circ}C$ wearing experimental garments(0.7clo). The air temperature decreased $1^{\circ}C$ every 15 minutes until it reached $19^{\circ}C$. After the stepwise temperature change, subjects were asked to select a comfortable air temperature by dialing the temperature control switch inside the chamber. The preferred temperature was determined when subjects did not change the air temperature for 10 minutes. The measurements were oxygen consumption, rectal temperature, skin temperature, and subjective sensation. Main results are as follows. In a mild cold condition, females demonstrated lower oxygen consumption and mean skin temperature than males while keeping a constant rectal temperature. Females increased rectal temperature and decreased mean skin temperature greater than males from $24^{\circ}C$ to $19^{\circ}C$. Males showed larger oxygen consumption increase than females. It appears that the thermo-physiological responses in a mild cold condition might be different between males and females. The preferred winter indoor temperature was $22.3^{\circ}C$ for males and $23.4^{\circ}C$ for females, and the suggested temperature was $21^{\circ}C$ for males and $23^{\circ}C$ for females.

• 자연과학논문집
• /
• 제11권1호
• /
• pp.151-157
• /
• 1999

승화성이 우수한 분산염료를 사용하여 면포에 대한 열 전사 염색성의 최적조건을 알아보기 위하여 온도, 시간, 농도에 따른 전사 염색에 대하여 연구하였다. 이 최적조건에 따라 팽윤제를 첨가한 후의 열 전사 염색성과 전 처리된 면포의 열 전사 염색성 및 분자량에 따른 열 전사 염색성을 검토하였으며, 세탁견뢰도와 일광견뢰도를 측정하여 열 전사날염에 대한 염색견뢰도를 측정하였다. 분산염료를 사용하여 면포에 대한 열 전사날염의 최적조건은 염료용액의 농도는 5%로, 처리온도가 $200^{\circ}C$, 처리시간은 3분에서 열 전사 염색성이 우수하였다. 면포에 대한 전처리의 시간이 길어질수록 열 전사 염색성이 향상되었으며, 팽윤제로는 Glycerin이 우수하였고, 혼합처리보다는 전처리가 열 전사 염색성이 우수하였다. 분자량에 따른 열 전사 염색성은 혼합처리의 경우 분자량이 작을수록 열 전사 염색성이 향상되었으며, 분자량이 커짐에 따라 열 전사 염색성이 나빠짐을 나타내었다. 그러나 전처리의 경우는 분자량에 큰 영향을 받지 않음을 나타내었다. 열 전사 날염된 면포의 세탁견뢰도는 염료의 분자량이 작은 것이 우수하였고, 일광견뢰도는 염료의 분자량이 큰 것이 보다 우수한 견뢰성을 나타내었다.

• 한국의류학회지
• /
• 제31권6호
• /
• pp.955-965
• /
• 2007

안전모는 다양한 산업현장에서 머리 보호를 위해 착용되는 보호구로 법적으로도 착용이 의무화되어있다. 그러나, 안전모 착용에 따른 불쾌감 및 생리적 부담은 작업자들이 착용을 꺼려하는 주된 원인이 된다. 본 연구에서는 이 문제를 해결하기 위한 하나의 방안으로 안전모에 냉매팩을 삽입하는 방법을 제안하였고, 동시에 냉매팩 삽입으로 인한 안전모의 무게 증가가 인체생리반응에 미치는 영향을 규명하고자 하였다. WBGT $33{\pm}1^{\circ}C$의 환경에서 인체착용평가 방법을 이용하여, 4가지 실험조건으로 안전모 착용시의 인체 생리반응을 조사하였고, 그 결과는 다음과 같다. 첫째, 안전모만 착용 시(OH)와 안전모 미착용시(NH)를 비교해 보면, 안전모 착용 시에 평균피부온, 직장온, 심박수, 발한량 등이 통계적으로 유의하게 높았고, 주관적인 감각에서도 더 덥고, 더 습하며, 불쾌하고 주관적으로도 힘들다고 느끼는 것으로 나타났다. 둘째, 냉매팩 삽입시의 경우(HA, HB), 냉매팩의 종류에 따라 여러 인체생리반응에 차이를 보였으나, 안전모만 착용한 경우(OH)와 비교 시 안전모내 기후, 발한량, 직장온 상승도, 열저장(heat storage) 등이 더 낮았다. 한서감과 쾌적감에서는 냉매팩 종류에 따라 다른 경향을 보였다. 본 결과를 통해 안전모 착용시의 생리적, 주관적 부담 정도를 객관적으로 파악할 수 있었으며, 안전모에 냉매팩을 삽입하는 방법을 서열 스트레스를 경감시키는 하나의 방법으로 제시할 수 있었다. 추후 연구에서는 냉매팩의 무게, 피복면적, 성분 등을 고려해야 할 것이며, 본 결과가 서열 환경에서 안전모를 착용하고 작업하는 여러 산업 근로자에게 도움이 되기를 기대한다.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.729-738
• /
• 2022

기존의 옷장은 단순한 의류를 보관하는 용도로만 사용되어 왔었다. 단순히 옷들을 보관하는 기능만 있기 때문에 습도나 온도 같은 환경을 조절하려면 따로 제습제 등의 물품을 구매해서 비치하는 방법밖에 없어 불편함이 있었다. 본 논문에서는 기존 옷장에서 편의성을 증대시켜 자동으로 온습도 조절 및 여러 편의 기능에 대한 것을 추가하였으며 기능을 효율적으로 동작 시키기 위하여 실험을 통하여 기능을 동작 시키기 위한 센서의 위치를 정하였고 여러 편의 기능과 실험 데이터를 기반으로 센서를 설치한 옷장 개발과 더불어 최근 다년간 성장한 스마트 홈 시장과 스마트 폰 애플리케이션 시장의 흐름에 맞춰 옷장과 스마트폰의 블루투스 페어링을 통한 옷장 내부의 온습도 조절 기능 및 다른 기능을 스마트폰을 사용하여 사용자에 맞춘 의류선택기능과 애플리케이션 내의 날씨 데이터를 통해 옷장 내부의 옷을 날씨에 맞는 코디 추천 기능 등의 편의 기능을 구현하고자 한다.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.862-872
• /
• 2020

This study explores the effects of facemasks on respiratory, thermoregulatory, cardiovascular responses during exercise on a treadmill and at rest. Five male subjects (25.8 ± 0.8 y, 171.8 ± 9.2 cm in height, 79.8 ± 28.1 kg in weight) participated in the following five experimental conditions: no mask, KF80, KF94, KF99, and N95. Inhalation resistance was ranked as KF80 < KF94 < N95 < KF99 and dead space inside a mask was ranked as KF80 = KF94 < N95 < KF99. The surface area covered by a mask was on average 1.1% of the total body surface area. The results showed no significant differences in body core temperature, oxygen consumption (VO2), carbon dioxide production (VCO2), heart rate or subjective perception among the five experimental conditions; however, cheek temperature, respiratory ventilation and blood pressure were greater for KF80 or KF94 conditions when compared to KF99 or N95 conditions (p<0.05). The differences among mask conditions are attributed to the dead space or specific designs (cup type vs pleats type) rather than the filtration level. In addition, the results suggest that improving mask design can help mitigate respiratory resistance from increased filtration.

• 복식
• /
• 제52권8호
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.

• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.95-102
• /
• 2017

Objectives: This study was conducted to evaluate the emission of VOCs from clothing that had been dry cleaned. Methods: In order to ensure the same conditions, f100% wool scarves were selected as the fabric type. Four identical tests were conducted on the option of either removing the plastic bags which came from the dry cleaning shop or not. The scarf was located inside a closet or room for one or two days. Small chamber tests were conducted to determine the VOC emission characteristics under the same conditions such as temperature, humidity, loading factor, and air exchange rates. Air from the chamber for VOCs was sampled by Tenax TA tube and analyzed by thermal desorption and GC/MSD. Results: Assuming that test represented dry cleaning and consumer's conditions well enough, we can conclude that immediate emissions after the dry cleaning of the scarfs caused elevated levels of TVOC, five VOCs (benzene, toluene, ethylbenzene, xylene, stylene), and decane group compounds. Conclusions: By removing the plastic bags which came from the dry cleaning shop or not, the storage conditions of dry cleaned scarfs by consumers during the storage time periods (one to three days) would be significant for reducing VOC emissions.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.844-852
• /
• 2020

This study is to understand the preferences of pilots, flight engineers and crew who work in the same aircraft but are exposed to different working environments and perform different mission operations in order to develop an ergonomic flight jacket. Based on a preliminary investigation, a survey of 107 pilots and 36 flight engineers and crew was conducted. The results are as follows; Pilots can control the temperature inside the cockpit, so they are less exposed to the cold when working, while flight engineers and crew are exposed to the cold more because they have many external tasks. The reason for the problem of the current flight jacket was a difference in ranking between two groups, but the highest ranking was poor dimensional suitability due to the habit of wearing layers of clothing. As a result of preferred design, there were significant differences between groups in the item of overall style. Pilots preferred a bomber jacket style(P:68.2%, E&C:44.4%), on the other hand, flight engineers and crew preferred a field jacket style(P:26.2%, E&C:55.6%)(p<.01). They preferred a stand collar(P:71.0%, E&C:86.1%), a fastener slider for a front fastening(P:62.6%, E&C:61.1%), fastener tape cuffs(P:54.2%, E&C:47.2%), a jacket with a softshell(P:86.9%, E&C:83.3%), fleece as softshell material(P:88.8%, E&C:69.4%), and fastener sliders as a attaching method(P:69.2%, E&C:61.1%). A hem fastening will be selected differently according to the overall style of outshell. Additionally, they preferred more than 5ea pockets(P:51.4%, E&C:44.4%), fastener sliders as pocket's fastenings(P:48.6%, E&C:61.1%), armpit ventilations(P:62.9%, E&C:58.5%). The results of above will be considered to design an ergonomic flight jacket.