• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.8
• /
• pp.1060-1074
• /
• 2013

This study measured and analyzed pressure at each measurement part of imported compression stockings sold in Korea to provide basic information to establish a pressure standard and grade ranking. This study used 40 medical compression stockings imported from 6 countries. Pressure measurements were taken at 11 points: front side and back side of ankle, end-point of the gastrocnemius muscle, front, inner side, back, and outer side of calf, back side of below knew girth, inner side, and outer side of mid-thigh girth, and inner side of thigh girth. AMI 3037-10 and AMI 3037-2 were used for measurements taken inside an environmental chamber at a temperature of $21^{\circ}C$ and a relative humidity (RH) of 65%. For the measurements, 11 air pack sensors were attached to a wooden model leg (Hohenstein) and three measurements were taken at each measurement point in three minutes. The average of these measurements was used for analysis. The findings of this study were as follows. As for the front side of the ankle, of the 40 products, 14 products (6 USA, 2 Swiss, 3 Italian, and 2 Taiwanese) were within the pressure range indicated on the product label; however, no German products fell within the pressure range. A total of 8 products (5 USA, 1 Swiss, 1 Italian, and 1 German) were gradient compression type; however, no Japanese or Taiwanese product were of this type. The majority of products had the highest pressure at the end-point of the gastrocnemius muscle. Only 3 products, 1 USA (Jobst Opaque 30-40mmHg), 1 Swiss (Sigvaris Cotton 34-46mmHg) and 1 Italian (Jobstocking 25-32mmHg), had measurements that met the indicated standard pressure, were a gradient compression type, and met the overall standard for compression stockings.

• The Korean Journal of Community Living Science
• /
• v.22 no.3
• /
• pp.485-491
• /
• 2011

This study was to present the preferred and the suggested indoor temperature of college students in winter based on their body composition. A total of 14 subjects(6 males and 8 females) participated in this study. They sat in a climatic chamber controlled at $24^{\circ}C$ wearing experimental garments(0.7clo). The air temperature decreased $1^{\circ}C$ every 15 minutes until it reached $19^{\circ}C$. After the stepwise temperature change, subjects were asked to select a comfortable air temperature by dialing the temperature control switch inside the chamber. The preferred temperature was determined when subjects did not change the air temperature for 10 minutes. The measurements were oxygen consumption, rectal temperature, skin temperature, and subjective sensation. Main results are as follows. In a mild cold condition, females demonstrated lower oxygen consumption and mean skin temperature than males while keeping a constant rectal temperature. Females increased rectal temperature and decreased mean skin temperature greater than males from $24^{\circ}C$ to $19^{\circ}C$. Males showed larger oxygen consumption increase than females. It appears that the thermo-physiological responses in a mild cold condition might be different between males and females. The preferred winter indoor temperature was $22.3^{\circ}C$ for males and $23.4^{\circ}C$ for females, and the suggested temperature was $21^{\circ}C$ for males and $23^{\circ}C$ for females.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.151-157
• /
• 1999

The study was investigated the improved printing effect of heat transfer ability for the cotton fabric treated with disperse dyes. Some important factors were studied to determine the most optimal conditions such as concentration of dye, treated time and temperature, after treatment and before treatment using swelling agent, and molecular weight of dye. The fastness to laundering and light for heat transfer printing was measured.The optimal conditions of heat transfer printing for cotton fabric treated with disperse dye were concentration of 5% owf, treated temperature of $200^{\circ}C$, treated time of 3 minute. The diffusion of disperse dyes inside cotton fabric was accelerated as a result of swelling agent such as glycerin, ethylene glycol, tetramethylene glycol, propylene glycol using in this study. The effects of heat transfer printing were increased that the increasement of before treatment time for swelling agent, decrease of molecular weight of dye.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.955-965
• /
• 2007

Safety helmets are used widely in various industries by workers since they are legally required to wear them. However, thermal discomfort is one of the major complaints from helmet users. To relieve this problem, frozen gelled packs can be considered for use inside the helmets. In this paper, tests were performed on humans to evaluate the physiological strains of wearing safety helmets and to investigate the effects of using frozen gelled packs inside the helmets. Experiments were conducted in a climatic chamber of WBGT $33{\pm}1^{\circ}C$ under four differed experimental conditions: 1) not wearing a safety helmet(NH); 2) wearing a safety helmet with frozen gelled pack A(HA); 3) wearing a safety helmet with frozen gelled pack B(HB); and 4) wearing only a safety helmet(OH). The results were as follows. First, when comparing NH with OH, physiological responses such as $\bar{T}_{sk},\;T_r$, HR and sweat rate were significantly higher in OH and subjective sensations were reported as less hot and more comfortable than NH(p<.05). Second, in regard to the frozen gelled packs inserted inside the safety helmets, some physiological responses in HA were different from those in HB, according to the two different types of packs. HA was hotter, more uncomfortable and less exhausted than HB. However, result from both HA and HB were lower than those from OH in terms of temperature and humidity inside safety helmet, sweat rate, $T_r$ increase, heat storage(p<.05). When wearing safety helmets with frozen gelled packs, it was shown that heat strain can be alleviated. These results are expected to help millions of workers who complain that wearing safety helmets is uncomfortable and messy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.729-738
• /
• 2022

Existing wardrobes have been used only for storing simple clothes. Since it has a function to store clothes, there is only one way to control the environment such as humidity or temperature, and there is only one way to purchase and store items such as a desiccant. In this paper, by increasing the convenience in the existing wardrobe, automatic temperature and humidity control and various convenient functions were added. In line with the smart home market and smart phone application market that have grown over the past several years, along with the development of a wardrobe with sensors, the temperature and humidity control function and other functions inside the wardrobe through Bluetooth pairing between the wardrobe and the smartphone can be customized to the user using a smartphone. Through the clothing selection function and the weather data in the application, we want to implement convenient functions such as the function of recommending clothes in the closet to match the weather.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.862-872
• /
• 2020

This study explores the effects of facemasks on respiratory, thermoregulatory, cardiovascular responses during exercise on a treadmill and at rest. Five male subjects (25.8 ± 0.8 y, 171.8 ± 9.2 cm in height, 79.8 ± 28.1 kg in weight) participated in the following five experimental conditions: no mask, KF80, KF94, KF99, and N95. Inhalation resistance was ranked as KF80 < KF94 < N95 < KF99 and dead space inside a mask was ranked as KF80 = KF94 < N95 < KF99. The surface area covered by a mask was on average 1.1% of the total body surface area. The results showed no significant differences in body core temperature, oxygen consumption (VO2), carbon dioxide production (VCO2), heart rate or subjective perception among the five experimental conditions; however, cheek temperature, respiratory ventilation and blood pressure were greater for KF80 or KF94 conditions when compared to KF99 or N95 conditions (p<0.05). The differences among mask conditions are attributed to the dead space or specific designs (cup type vs pleats type) rather than the filtration level. In addition, the results suggest that improving mask design can help mitigate respiratory resistance from increased filtration.

• Journal of the Korean Society of Costume
• /
• v.52 no.8
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.343-359
• /
• 2016

Objective:In this study, we designed working clothes for livestock farmers to wear in spring and autumn to improve their work efficiency, conducted a physiological test on their performance, and evaluated their comfort. Background: In recent years, livestock farming in Korea has expanded, yet farmers' safety and sanitation levels remain low in hazardous environments that include organic dust, toxic gas, and heat stress, as well as the risk of accidents. Furthermore, most livestock farmers wear ordinary or dust-resistant clothes that are unsuitable for rearing livestock and compromise their safety and health. Thus, it is important to design specialized working clothes for livestock farmers that are comfortable and that minimize their health and safety risks. Method: To this end, we examined the literature on livestock (poultry, swine, and cattle) farmers' safety and sanitation issues, designed appropriate working clothes, and tested them in terms of sensory feel, physiological response, and subjective comfort. Results: The respondents expressed satisfaction with the new working clothes. The results of a physiological test showed a decline in temperature and humidity inside the clothes, a lower pulse rate, and a lower oxygen intake compared to the measurements taken when famers wore their previous working clothes. This indicates a fall in heat stress and fatigue, which was mostly consistent with the results of the assessment of subjective comfort. Conclusion: The results of the analysis show an improvement in the comfort of the new working clothes compared to the dust-resistant clothes that are widely worn. Based on this study, the new working clothes need to be further tested and evaluated to improve the design. Application: This study is expected to contribute to designing better working clothes for livestock farmers.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.95-102
• /
• 2017

Objectives: This study was conducted to evaluate the emission of VOCs from clothing that had been dry cleaned. Methods: In order to ensure the same conditions, f100% wool scarves were selected as the fabric type. Four identical tests were conducted on the option of either removing the plastic bags which came from the dry cleaning shop or not. The scarf was located inside a closet or room for one or two days. Small chamber tests were conducted to determine the VOC emission characteristics under the same conditions such as temperature, humidity, loading factor, and air exchange rates. Air from the chamber for VOCs was sampled by Tenax TA tube and analyzed by thermal desorption and GC/MSD. Results: Assuming that test represented dry cleaning and consumer's conditions well enough, we can conclude that immediate emissions after the dry cleaning of the scarfs caused elevated levels of TVOC, five VOCs (benzene, toluene, ethylbenzene, xylene, stylene), and decane group compounds. Conclusions: By removing the plastic bags which came from the dry cleaning shop or not, the storage conditions of dry cleaned scarfs by consumers during the storage time periods (one to three days) would be significant for reducing VOC emissions.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.844-852
• /
• 2020

This study is to understand the preferences of pilots, flight engineers and crew who work in the same aircraft but are exposed to different working environments and perform different mission operations in order to develop an ergonomic flight jacket. Based on a preliminary investigation, a survey of 107 pilots and 36 flight engineers and crew was conducted. The results are as follows; Pilots can control the temperature inside the cockpit, so they are less exposed to the cold when working, while flight engineers and crew are exposed to the cold more because they have many external tasks. The reason for the problem of the current flight jacket was a difference in ranking between two groups, but the highest ranking was poor dimensional suitability due to the habit of wearing layers of clothing. As a result of preferred design, there were significant differences between groups in the item of overall style. Pilots preferred a bomber jacket style(P:68.2%, E&C:44.4%), on the other hand, flight engineers and crew preferred a field jacket style(P:26.2%, E&C:55.6%)(p<.01). They preferred a stand collar(P:71.0%, E&C:86.1%), a fastener slider for a front fastening(P:62.6%, E&C:61.1%), fastener tape cuffs(P:54.2%, E&C:47.2%), a jacket with a softshell(P:86.9%, E&C:83.3%), fleece as softshell material(P:88.8%, E&C:69.4%), and fastener sliders as a attaching method(P:69.2%, E&C:61.1%). A hem fastening will be selected differently according to the overall style of outshell. Additionally, they preferred more than 5ea pockets(P:51.4%, E&C:44.4%), fastener sliders as pocket's fastenings(P:48.6%, E&C:61.1%), armpit ventilations(P:62.9%, E&C:58.5%). The results of above will be considered to design an ergonomic flight jacket.