• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.719-725
• /
• 2014

In the present study, a numerical analysis of an injection molding process was conducted for predicting the mold deformation considering non-Newtonian flow, heat transfer, and structural behavior. The accurate prediction of mold deformation during the filling stage is important to successfully design and manufacture a precision injection mold. While the local mold deformation can be caused by various factors, a pressure induced by the polymer melt is considered to be one of the most significant ones. In this regard, the numerical simulation considering both the melt filling and the mold deformation was carried out. A mold core for a 2D axisymmetric center-gated disk was used for the demonstration of the present study. The flow behavior inside the mold cavity and temperature distribution were analyzed along with the core displacement. Also, a Taguchi method was employed to investigate the influence of the relevant parameters including flow velocity, mold core temperature, and melt temperature.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.3
• /
• pp.531-540
• /
• 2010

Objectives : In this study, following the cavity restorations with low copper conventional alloy, high copper admixed one and high copper unicompositional one, which are used the most frequently in a clinical setting at the present, to experiment the time-dependent changes of strength, bubbles were examined. Besides, to examine the detrimental effects of mercury contained in dental amalgam, the amount of mercury release was evaluated. Methods : As dental amalgams which were used herein, [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy] were selected for a low-copper conventional amalgam, a high-copper admixed one and a high-copper unicompositional one in the corresponding order. The formation of bubbles and the weight ratio of mercury release were evaluated using a field emission scanning electron microscope (FE-SEM). Thus, the following results were obtained: Results : 1. The time-dependent amount of mercury release reached a statistical significance in three types of alloys, which was shown in such a descending order as [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy]. 2. A low-copper conventional type, BESTALOY is a cutting type and it was found to have an increased formation of fine bubbles. In the remaining two types, [Hi-Aristaloy 21] (a high-copper admixed alloy) and [Sybraloy] (a high-copper unicompositional alloy), the time-dependent changes in the formation of bubbles was negligible. Conclusions : Accordingly, this type of mercury release from amalgam alloy denotes the difference in the weight ratio of total constituents between after 24 hours and after two weeks. But further studies are warranted to examine the amount of mercury release which is detrimental to human bodies. Besides, a low-copper conventional alloy is a cutting type and it was characterized by the abundant formation of bubbles in a time-dependent manner. This implies that the strength of amalgam is impaired, which should be considered in selecting the appropriate amalgam alloy in a clinical setting.

• Journal of Korean Medical classics
• /
• v.19 no.3
• /
• pp.365-380
• /
• 2006

All of the disease which was referred in ${\ulcorner}$Diagnosis and Treatment of the Woonded, Carbuncle, intestinal infection and acute eczema in Synopsis of Golden Chamber${\lrcorner}$ are belong to surgery. Woonded in this chapter, specially, come under in case occur by metal, and spoke that this thing is metal wounded(金瘡). I am considered by something to use Wangbulryuhaengsan(王不留行散) in wound that is not festered, Baenongtang(排膿湯) and Baenongsan(排膿散) in wound that is festered. Carbuncle is one of Venus festering nature file that happen in skin and muscle because blood does not circulate with flag and part's flare, calorification, pain, puffiness are characteristic. Carbuncle is agreed with concept of inflammation of modern medicine. When treat carbuncle, without using surgery medical treatment, used together internal medicine surgery medical treatment. Intestines carbuncle(腸癰) is come in inflammation in abdominal cavity as kind of inflammation, partiality peritoneum festering disease round present cecum as one of inside carbuncle. I think, when treat intestines carbuncle, in case cold and moisture become stasis and heat is less, Uiibujapaedoksan(薏苡附子敗毒散) can be used. Independently of festering, Daehwangmokdantang(大黃收丹湯) can be used in case heat and extravasated blood become stasis. Saliva ulcer on the vulva is comes in impetigo In Case of young child, and is come in Venus eczema in case is general. Prognosis of saliva ulcer on the vulva widespread thing can treat by arm, leg at Lips region, but it does not treat to grow at Lips region from limb, and treatment uses Hwangryunbun(黃連粉)

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.226-231
• /
• 2008

The heat transfer characteristics of a solar high-temperature receiver with heat pipes was investigated by numerical simulation. The concentration ratio of the solar receiver ranges 1000 and the concentrated heat is required to be transported to a certain distance for specific applications. This study deals with internal geometry variation of a solar receiver incorporating high-temperature heat pipe. The isothermal characteristics in the receiver section is of major concern. The diameter of the solar thermal receiver was 120 mm and the length was 400 mm. The angle of receiver end wall was varied between $0^{\circ}$ and $45^{\circ}$. The wall thickness of the heat pipe channel was 4mm and 48 axial channels of the same dimensions were attached to the outer wall of the receiver with even spacing in the circumferential direction. The channels are changed to high-temperature sodium heat pipes. Commercial softwares were employed to deal with the radiative heat transfer inside the receiver cavity and the conduction heat transfer along the channels. The numerical results are compared and analyzed from the view Point of high-temperature solar receiver.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.7 no.1
• /
• pp.53-84
• /
• 1994

The study has been carried out to investigate of the Allergic Rhinitis by referring to 87 literatures. The results were as follows; 1. In oriental medical science, Allergic Rhinitis is belong to the category of the 'BiGu'(鼻구) 'GuChe'(구체). The 'Gu'(구) of the BiGu means watery rhinorrhea, the 'Che'(체) of the GuChe means sneezing. 2. The cause of a disease summarize the weak of Lung, Spleen and Kidney, and invasion into the nasal cavity of PoongHan etc a wrong air. Sometimes the pathologial change appear PoongHan changeHwa(風寒化火), HwaYeol is hidden in the inside(火熱內伏). The contributing factors are found a season(spring, winter), an abnormal weather(運氣 : 少陰 少陽 陽明 司天, 歲金不及), an emotional stress, an external wound of the harmful air, a food allergens and fatigue, a contact of substances, a sunlight etc. 3. Predominant symptoms are watery rhinorrhea, sneezing and nasal obstruction. Sometimes accompanic symptoms are nasal bleeding, mucopurulent rhinorrhea, olfactory disturbance, nasal polyp, rhinolalia clausa, respiratory disfunction etc. 4. The treatment-methodes is as follows, OnBoPaeJang GeoPoongSanHan(溫補肺臟 祛風散寒), GeonBilkGi(健脾益氣), BoSinNabGi (補腎納氣). The treatmentherbs is as follows, OnBoJiLuDan GaGam(溫補止流丹 加減), OkByeongPoongSan plus ChangIJaSan GaGam(玉屛風散合 蒼耳子散 加減), BoJungIkGiTang GaGam plus SoCheongLyongTang(補中益氣湯加減 配合 小靑龍湯), SinGiHwan GaGam(腎氣丸加減), GaeJiTang(桂枝湯) etc. 5. The external treatment is as follows, JeokBi(滴鼻), ChuiBi(吹鼻), SaekBi(塞鼻), stick and herbs-injection on the acupuncture-point, pressure ear acupuncture-point, herbs-pillow etc. 6. The acupuncture-moxa treatment is as follows, the methodes of cure apply TongJoGyeongGi(通調經氣), SanTongBiGui(宣通鼻竅) etc. Predominent acupuncture-points are YoungHyang(迎香), InDang(印堂), BiTong(鼻通), SangSeong(上星), HabGok(合谷) and so on. As mentioned above, from now on, it's need to the oriental medical scientific study of the Immunity and Allergy and to the external treatment's application for the ascent of the treatment-effect of the allergic disease.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.142-147
• /
• 1995

Soliton pulse outputs are generated with figure '8' type erbium-doped fiber laser mode-locked by using a fiber loop mirror. The fiber loop mirror consists of an erbium-doped fiber amplifier at the one end of the loop, and 504 m-long dispersion-shifted fiber as a nonlinear medium. By pumping with a $1.48{\mu}m$ wavelength laser diode and adjusting the polarization controllers inside the loop, soliton pulses are generated with 1574 nm center wavelength and 1.2 nm linewidth. The soliton pulses are found randomly spaced within the fundamental period corresponding to cavity round trip time. The autocorrelation trace shows that the pulse width is 2.4 ps, which is in good agreement with the theoretical prediction. The pulsewidth- bandwidth product is found to be 0.348 which means that the pulses are nearly transform-limited.imited.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.13-20
• /
• 1995

In this paper, the thermoacoustic refrigerating system was implemented and its operation was experimentally verified. The system is composed of several parts ,4 inch midrange speaker, speaker housing, chamber, stack housing, stack of plates, heat exchangers, thin pipe and cavity. The system is filled with He gas at 10 bar and contains T-type thermocouples and condenser microphone for measuring the temperature and pressure inside, respectively. In addition, cooling water is used for protecting speaker from thermal destruction and cooling down the hot heat exchanger. For the experimental verification of the implemented refigerating system, electrical impedance and resonance characteristics were measured. The results showed that it was most efficient to drive the system at 340 Hz. When operated at 340 Hz, $30^\circ{C}$ environments and 50 electical watts, the temperature of the cold region decreased by $16^\circ{C}$. The dissatisfaction mainly comes from the incomplete thermal insulation of the cold region. We also pointed out some guidelines to improve the performance for later study.

• Journal of Korean Medical classics
• /
• v.18 no.2 s.29
• /
• pp.159-167
• /
• 2005

By comparing ‘Jing Mai(${\ulcorner}$經脈${\lrcorner}$)’ and ‘Jin Fu(${\ulcorner}$禁服${\lrcorner}$)’, we are able to see that ‘Jing Mai’ has adopted many of its aspects from ‘Jin Fu’, which also enables us to conclude that ‘Jing Mai’ was made after 'Jin Fu', with the 'Ren Ying Cun Kou Mai Fa(人迎寸口脈法)‘ being considered important. 'Jing Mai' was made relatively late, during the last days of 'Xi Han(西漢)' or early days of 'Dong Han(東漢)'. Also 'Jing Mai' was written after 'Ying Qi(${\ulcorner}$營氣${\lrcorner}$)’. ‘12 Jing Mai’ in ‘Jing Mai’ is based mainly on 'Yin Yang Shi Yi Mai Jiu Jing(${\ulcorner}$陰陽十一脈灸經${\lrcorner}$)‘ and has also referred to other meridian theories, modifying it again by theories of 'Jin Fu' and 'Ying Qi', forming the 'Jing Mai Lian Huan(經脈連環)' part. The major change in '12 Jing Mai' is that '6 Yang Jing(6陽經)' enters the abdominal and thoracic cavity, directly relating to 'Liu Fu(六腑)'. 'Ben Jing(本經)'s connection to 'Ben Zang' is referred to as 'Shu(屬)' and connection to 'Ben Zang(本臟)' is referred to as 'Lou(絡)', clarifying 'Biao Li Guan Xi(表裏關系)' inside and outslde and 'Zang Fu Xiang He(臟腑相合)' congruency. Looking at the pathological condition view of ‘Jing Mai’, the writer of 'Jing Mai Pian' has renewed it and has erased repeated symptoms of 'Suo Seng Bing(所生病)' that appears in 'Shi Dong Bing(是動病)'. If the wrong adoption of theories of previous generations are corrected and parts which do not comply with the text's original meaning and parts that posterities added are deleted, the ancient acupuncture theory preserved in this book is still a precious treasure.

• Journal of Veterinary Clinics
• /
• v.15 no.2
• /
• pp.472-475
• /
• 1998

A female Green iguana (Iguana iguana) was brought to the small animal clinic in Hannover Veterinary school because of anorexia and convulsion. Two months ago, the owner bought two iguanas, one female and one male and had to take a female to the one of local small animal clinic because she, born in 19931 didn't eat well and showed the tremor of the legs. The veterinarian suspected it to have a calcium deficiency and gave an injection of calcium and vitamin D3. But still during the last two months, the female iguana did only eat some lettuce while the other male ate lettuce, fruits and commercial cat-food ($Whiskas^{\circledR}$, Effem, Verden). It was not possible to evaluate the rations of these different "food-components". They are kept in the terrarium with water container. By palpation of the abdomen, hard thing like stone was palpated in the mid-region. The blood test wasn't carried out because of the difficulties of getting blood and because of her bad condition. It was firmly diagnosed as cystic calculus through radiography. Since the animal is in shock state already, the prognosis after surgery was bad. It was assumed to be too late to expect its surviving with the surgery carried out or without it. Cystotomy was performed in the cranial ventral paramedian incision in order to preserve the large ventral abdominal vein in the linen alba region. After two stay sutures ("holding suture" ) with 5-0 polyglactin 910 ($Vicryl^{\circledR}, Ethicon$) on the bladder, cystotomy was carried out and the stone inside was removed. Then, the bladder was closed in one-layer sutures. The abdomen was closed in simple interrupted suture with same material after the instillation of 10 ml saline solution into the abdominal cavity. The cystic calculus was in a size of $5.8{\times} 5.O{\times} 3.5 cm$. The analysis of the stone was carried out in two ways which are the infrared spectroscopy of the stone and quick analysis by $Merckognost^{\circledR}$(Diagnostica Merck, Merck). In the result of the infrared spectroscopy, the stone wee composed of 10% ammonium urate and 90% dihydrated uric acid. This iguana wasn't able to survive.n't able to survive.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.