• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.12-18
• /
• 2004

This study is to make plans for perpendicular greening with artificial ground of planter type to improve urban environment. The experiments of this study are performed to find out the suitable soil and irrigation method for artificial ground of planter greening. Thereupon, organic or inorganic soil improvement material is mixed with soil of each planter as experiment, In result, the plants in soil mixed organic soil improvement material thrive rather than that in soil mixed inorganic material, It is to be desired that the planter equip with the irrigation system, be wider than planter and be planted shrubs for positive plant growth. As for irrigation system, drip irrigation is effective on plant growth southern exposure but Ebb and Flow is effective eastern exposure. Therefore, irrigation system should consist of two types above plus keeping water on the bottom of planter to save water and store rainwater.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.817-825
• /
• 1998

A three-dimensional ecosystem model is applied to the Suyoung Bay, located at the southeastern part of Korea, to study of the material distribution in the time scale of several tens days. The model has included of the DIN(Dissolved Inorganic Nitrogen), DIP(Dissolved Inorganic Phosphate), phytoplankton, zooplankton and detritus, and also was coupled with the physical processes. The spatial distribution of chlorophyll-a and primary productivity in the model is determined by the physical and chemical-biological parameters. The horizontal distributions of the DIN, DIP and chlorophyll-a are decreased from the coast to the off-shore, though the nutrients show some more complicated pattern than the chlorophyll-a. The nutrient contents in the off-shore are low, and thus a relatively low productivity(chlorophyll-a) are presented. On the whole, the distribution of the results of model are smoother than the observed ones and some small scale variation in the observed data cannot be reproduced by the model due to the resolution limits of model. However, the basic pattern and the quantitavities has been reproduced by the model well.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.424-425
• /
• 2006

Zinc sulfide is a well-known host material of phosphor emitting different radiations dependent on different doping impurities of metallic ion. It emits green, blue, orange-yellow or white colors by doping with activators such as copper, silver, manganese and so on. In this study, manganese, copper and chlorine doped ZnS phosphor (ZnS:Mn,Cu,Cl) was synthesized by solid-state reaction method. The optical properties were investigated according to different concentrations of sulfur and activators used during the synthesis process.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.203-214
• /
• 2022

Thermoelectric (TE) heating and cooling devices, which are able to directly convert thermal energy into electrical energy and vice versa, are effective and have exhibited a potential for energy harvesting. With the increasing consumer demands for various wearable electronics, organic-based TE composite materials offer a promise for the TE devices applications. Conductive polymers are widely used as flexible TE materials replacing inorganic materials due to their flexibility, low thermal conductivity, mechanical flexibility, ease of processing, and low cost. In this review, we briefly introduce the latest research trends in the flexible TE technology and provide a comprehensive summary of specific conductive polymer-based TE material fabrication technologies. We also summarize the manufacture for high-efficiency TE composites through the complexation of a conductive polymer matrix/inorganic TE filler. We believe that this review will inspire further research to improve the TE performance of conductive polymers.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.259-262
• /
• 2012

Recently, as the national policy of green growth is promoted, construction field also makes an effort to reduce CO₂ gas released when producing cement continuously. In other words, as the method solving environmental pollution and resources exhaustion, lots of mineral material compounds such as blast furnace slag powder which is industrial by-product, fly ash, red mud, etc. are examined to bo used as the substitute good of cement Therefore this study is to investigate the hardening characteristics of alumino-silicate inorganic binder using red-mud used as a accelerator of industrial by-product such as fly ash and blast furnace slag powder according to curing temperature. As a result, it is effective to use red-mud as the accelerator of inorganic binder with other additory accelerators.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1225-1230
• /
• 2008

Recently the building material have been developed with the concept of controlling the indoor environment as well as the concept of emitting contaminants less. So, a lot of products with humidity control characteristics put it on the market. However, objective evaluation to these products doesn't work out. Thus consumers cannot obtain accurate information to these products. Therefore, we selected inorganic paint in the functionality materials and evaluated its humidity control characteristic in this research. We divided by four stages and evaluated this inorganic paint. The 1st and 2nd third experiments were executed on a natural condition and the fourth experiment was executed with humidity had been raised by using the humidifier.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.167-170
• /
• 1989

Al2O3/SiC composite-material was synthesized by the birth-spread mechanism through the carbothermal reduction reaction of SiO2 in Ha-Dong Kaolin with carbon powder under H2 gas atmosphere at 1300~140$0^{\circ}C$. Average diameter of synthesized SiC whiskers were 1${\mu}{\textrm}{m}$ and aspect ratio (c/a) was 10~100. Al2O3 particles and SiC whiskers were mixed homogeneously in the reacted pellet.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.48-49
• /
• 2018

Recently the old buildings have been increasing and increasing reconstruction. As a result, the frequency of use of architectural adhesives has increased. Adhesives are not only used for bonding but also for building materials used in various fields. However, since the adhesive is made of an organic material, it causes various skin diseases and sick house syndrome, and when a fire occurs, harmful substances are generated, and incomplete combustion may cause personal injury. Therefore, in this study, to solve the disadvantages of conventional adhesives, we tried to develop inorganic adhesives using inorganic materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.79-80
• /
• 2018

Recently, the interest in remodeling of new and old buildings is increasing worldwide. As a result, the frequency of use of architectural adhesives has increased. Currently, adhesives used in buildings are made of organic materials in most cases, and epoxy resin adhesives are most widely used. However, epoxy resin adhesives contain formaldehyde and VOCs in the room during construction, which can cause sick house syndrome. In case of building fire, it may cause damage due to carbon monoxide generated from organic materials. It is urgent to study the problem of epoxy fill adhesive made of such organic materials. Therefore, the purpose of this study is to investigate the effect of the adhesion of epoxy resin adhesive, which is a problem of epoxy resin adhesive, which is an existing organic adhesive by using inorganic materials such as magnesia and phosphate, And the inorganic adhesive which does not emit the release amount as an inorganic material.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.219-238
• /
• 2003

Indole-3-acetic acid (IAA) molecule has been successfully encapsulated in biocompatible inorganic matrix in order for the cosmetic application such as superfacial fine line reduction. The encapsulation was realized through chemical reaction involving simultaneous formation of inorganic lattice and 1M giving rise to an 1M-inorganic nanohybrid (IAA-brid) which shows excellent storage stability and sustained releasing property of indole-3-acetic acid. The clinical efficacy of essence cream containing IAA-brid as anti-wrinkle formulation was also carefully evaluated by measuring the roughness of the skin replica before and after treatment. Upon administration of the cream on the eye-area, the fine-line is drastically reduced.