• 보존과학연구
• /
• s.24
• /
• pp.131-152
• /
• 2003

In ancient times, many kinds of different inorganic pigments were used as colorants for making objects. These pigments are still evidentin well known objects such as Danchung, mural painting and Buddhist painting. This study discusses the results obtained from an analysis of the pigments used on the Buddha pigments. The results can be briefly summarized as below; Firstly, the microcrystalline structures revealed on the cross section of analyzed pigments, samples of which were taken from various parts of Buddha pigments show that different sizes and shapes of pigment particle were used for different purposes such as coloring, toning of the pigments. The arrangement of pigments and their usages are varied according to the owner temples and the place where it was created. Secondly, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are: Red pigments - Red lead($Pb_3O_4$) and Cinnabar(HgS)Green pigments - Malachite[$CuCO_3$.$Cu(OH)_2$] and Prussian Blue[$Fe4(Fe(CN)_6)_2$]Gold pigments - pure gold(Au)Yellow pigments - Orpiment($A_s2S_3)White pigments - Lead Cyanamide[$Pb_3(CO_3)_2(OH)_2]Ultramarine pigments - Azulite[$Cu_3(CO_3)_2(OH)_2]Especially, we knew that pigments used on the Ssanggye temple not repaired to the artificial synthetic pigment

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2000.10a
• /
• pp.128-135
• /
• 2000

The thiosulfate reductase gene (PhsABC) from Salmonella typhimurium was expressed in Escherichia coli in order to produce sulfide from inorganic thiosulfate and precipitate metals as metal sulfide complexes. A 5.1-kb DNA fragment containing the native phsABC and a 3.7-kb DNA fragment, excluding putative promoter and regulatory regions were inserted into expression vectors pTrc99A and pJB866, respectively. Upon expression of phsABC, E. coli DH5$\alpha$ harboring the phsABC constructs showed higher thiosulfate reductase activity and produced significantly more sulfide than the control strain (E. coli DH5$\alpha$) under both aerobic and anaerobic conditions. Among the four constructs, E. coli DH5$\alpha$ harboring pSB74 produced the highest level of thiosulfate reductase and removed most of heavy metals from solution under anaerobic conditions. In a mixture of 100 $\mu$M each of cadmium, lead, and zinc, the strain could remove $99\%$ of the total metals from solution within 10 hours. Cadmium was removed first, lead second, and zinc last. In contrast, a negative control did not produce any measurable sulfide and removed very little metals from solution. These results have important implications for removal of metals from wastewater contaminated with several metals.

• Journal of Sensor Science and Technology
• /
• v.30 no.5
• /
• pp.279-285
• /
• 2021

Recently, cesium tellurium iodine (Cs₂TeI₆) has emerged as an inorganic halide perovskite material with potential application in optoelectronic devices due to its high absorption coefficient, suitable bandgap and because it consists of nontoxic and earth-abundant elements. However, studies on its fabrication process as well as photoresponse characteristics are limited. In this study, a simple and effective method is introduced for the synthesis of Cs₂TeI₆ thin films by a two-step dry process. A Cs₂TeI₆-based lateral photosensor was fabricated, and its photoresponse characteristics were explored under laser illuminations of four different wavelengths in the visible range: 405, 450, 520, and 655 nm. The initial photosensing results suggest potential application and can lead to more promising studies of Cs₂TeI₆ film in optoelectronics.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.5-10
• /
• 2002

Pistia stratiotes(Water Lettuce) can be applied to remove inorganic pollutants from the wastewater for the advanced treatment. This study attempts to remove heavy metals from the secondary treated wastewater. Three different initial concentrations of heavy metals were applied as 0.5, 1.0 and 1.5 mg/L for Lead(Pb) and Chromium(Cr(VI)). In addition, the removal efficiency for the mixture of Lead and Chromium was also observed. The removal efficiency of Pb was in the range of 41.0~72.0% for Pb and it was in the range of 25.0~30.0% for Cr(VI) by Pistia stratiotes. The plants placed in static systems were able to remove the heavy metals in a few days of exposure. However, it was observed that the heavy metals affected produce phytotoxic effects on plants resulting in inhibition of chlorophyl synthesis, decrease in biomass production, and finally plant necrosis. The removal efficiencies of Pb and Cr(VI) by Pistia stratiotes were increased with plant growth.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.2
• /
• pp.90-95
• /
• 2019

Methylammonium lead bromide ($MAPbBr_3$) has attracted a lot of attention due to their excellent optoelectronic properties such as the compositional flexibility relevant to photoluminescence (PL) and UV-Vis absorbance spectrum, high diffusion length, and photoluminescence quantum yield (PLQY). Despite such advantages of organic-inorganic perovskite materials, more systematic study on manipulation of their optoelectronic properties in homo- or heterovalent metal ions doped halide perovskite nanocrystals is lacking. In this study, we systematically investigated the optical properties of colloidal $CH_3NH_3Pb_{1-x}Sn_xCl_{2x}Br_{3-2x}$ particles by addition of $SnCl_2$ into the typical methylammonium lead tribromide ($CH_3NH_3PbBr_3$) precursor solution. We found that only 1% addition of $SnCl_2$ shows a significant blue-shift from 540 nm to 420 nm in UV-Vis absorbance spectrum due to the strong quantum confinement effect. Furthermore, continuous blue-shift in photoluminescence spectra was observed as the amount of Cl increases. These experimental results provide new insights into the replacement of Pb within $MAPbBr_3$, required for the broadening of their application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.110-117
• /
• 2003

A thermotolerant yeast strain, Saccharomyces cerevisiae KNU5377 (abbreviated as KNU5377, was exposed to inorganic acids including sulfuric, nitric and hydrochloric acid. As a stressor, each inorganic acid is very easily dissociated in water, resulting in lowering environmental pH. When compared with a reference S. cerevisiae ATCC24858, KNU5377 could overcome such a severe condition containing a final 0.4% concentration of sulfuric acid or nitric acid to grow at the overnight culture, but this reference could not. Additionally, this strain showed a surprisingly strong tolerance by surviving despite of exposure to the regime of 0.35% of hydrochloric acid for over 90 min and also to 0.6% of sulfuric acid for 30 min. On the contrary, both strains could not survive against a final 0.45% concentration of nitric acid. This strain KNU5377 could produce ethanol of 3% in 2 days by using the fermentation medium containing a final 0.3% concentration of sulfuric arid. Moreover, change into a final 0.2% concentration of sulfuric acid caused this strain to enhance fermentation productivity up to about 4.5% even at $40^{\circ}C$. In exposure to a final 0.2% of sulfuric acid for 60 min, trehalose was most accumulated within 30 min in KNU5377, and this suggested a cellular defense system led by this disaccharide was profitable for this strain to lead to no morphological changes.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.360-372
• /
• 2010

Concentrations of ambient air particles such as total suspended particulates (TSP), particulate matter $(PM)_{10}$, and $PM_{2.5}$, were monitored simultaneously from May to June, 2007, at four locations at Alashan and Beijing in China, and Seoul and Gosan in South Korea. These monitoring sites are in the pathway of Asian dust (AD) storms traveling from China to the Korean peninsula. An AD event was observed in the Korean peninsula on May 25-26. During the sampling period, the average concentrations of TSP and PM10 were each higher than $150\;{\mu}g/m^3$ in Alashan and Beijing, but not in Seoul and Gosan. The concentration of TSP in Alashan (where the dust storm originated) on the day of the AD event reached $1824.7\;{\mu}g/m^3$, this being the highest concentration of air particles observed during the sampling period. The level was decreased to 15% of this ($274.7\;{\mu}g/m^3$) in Seoul and to 8.7% ($159.0\;{\mu}g/m^3$) in Gosan when the AD was observed two days later in Korea. Gosan, a representative background site in East Asia, displayed the lowest concentration of particles, with this maximal TSP concentration of $159\;{\mu}g/m^3$. Inorganic element contents in the air particles were also measured, and the concentrations in the four different regions compared. Concentrations of anthropogenically-enriched heavy metals in $PM_{10}$ and $PM_{2.5}$, such as lead, arsenic, cadmium, and mercury, were higher in the metropolitan cities of Beijing and Seoul compared to non-industrialized regions of Alashan and Gosan. However, the concentrations of inorganic soil elements including iron, magnesium, aluminum sodium, and manganese, were higher in Alashan compared to those in other sampling sites.

• Environmental Analysis Health and Toxicology
• /
• v.19 no.4
• /
• pp.327-334
• /
• 2004

도심지역의 중금속 배출원은 매우 다양하며, 배출 중금속은 물질별 노출 수준, 노출기간에 따라 건강유해영향을 일으킬 수 있다. 따라서 직업적 노출이 없는 도심 지역의 일반인의 혈중 중금속의 모니터링은 독성학적 측면에서 중요하다. 본 연구는 서울 도심지역의 직업적 노출이 없는 성인 남녀 144명(20∼75세)을 대상으로 중금속(납, 크롬, 니켈, 카드뮴)의 혈액 내 축적된 정도를 평가하였다. 채취한 혈액의 분석은 GF-AAS를 사용하였다. 물질별 혈중 중금속 농도는 납 63.2 $\mu\textrm{g}$/L, 크롬 0.12 $\mu\textrm{g}$/L, 니켈 $\mu\textrm{g}$/L, 카드뮴 1.43 $\mu\textrm{g}$/L로 각각 조사되었다.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.555-561
• /
• 1994

A method was described for the graphite furnace atomic absorption spectrophotometric determination of trace cadmium, copper, chromium and lead in urine samples. The elements were directly determined without any other treatments. The ash temperature was intensively optimized to improve the large background by the removal of organic materials and alkali and alkali earth metals in urine samples. Two kinds of standard solutions were used to plot calibration curves. From the recovery data, it could be confirmed that the analytical results with the synthetic urine matrix similar to real urine were more accurate than with a deionized water matrix.