• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.32-33
• /
• 2021

The corrosion of the embedded steel rebars and the consequent deterioration of the reinforced concrete structure has become a challenging concern to the construction industries for the fiscal deficit. However, corrosion inhibitors are potential and being widely used for corrosion mitigation to solve such problems. This study has been focused on the mixed type of corrosion inhibitor where one component of the corrosion inhibitor is organic and another one is inorganic material. 0.1 (M) triethanolamine (TEA) and 0.01 (M) sodium hexametaphosphate (SHMP) have been mixed in distilled water to produce the mixed inhibitor. Studies of the steel rebar corrosion in chloride contaminated (3.5 wt.% NaCl) concrete pore (CCCP) solution has been conducted using different concentrations of corrosion inhibitor. Electrochemical impedance spectroscopy (EIS) method is involved to understand the corrosion behaviour of the steel rebars at different exposure durations.

• 응용화학
• /
• 제9권2호
• /
• pp.25-28
• /
• 2005

To evaluate the dental restorative application of polymer composites filled with hydroxyapatite (HAP) which is an inorganic component of human bone material, dental properties of the polymer composites were investigated. A visible light system was utilized to activate the acrylate resin matrix of the composites. Maximum loading percentage of HAP in composite was 65 wt% and the depth of cure was 6.0 mm which can be applicable for dental restoration. With increasing the HAP content, degree of conversion of polymer composites was slightly decreased, however, polymerization shrinkage value was not varied. Diametral tensile strength value was enhanced with an increase of HAP content, however, there was no strict trend between flexural strength and HAP concentration. Anyhow, polymer composites prepared herein have superior mechanical properties sufficient specifications applicable to dental materials.

• 한국융합학회논문지
• /
• 제8권2호
• /
• pp.157-162
• /
• 2017

제지슬러지 소각재, 용광로 슬래그 미세분말 생석회, 무수석고 및 프라이애쉬 등을 혼합하여 무기계고화재를 제조하였다. 슬러지 처리용으로 개발된 고화재의 주성분은 SiO, $Al_2O_3$, $TiO_2$, $Fe_2O_3$, $Mn_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, $P_2O$, $SO_3$이었다. 시멘트와 달리, 개발된 고화재에는 발암물질로 알려진 $Cr^{6+}$가 함유되지 않았다. 중금속 및 기름 오염토를 고화재와 혼합한 후 7일간 양생하여 빗물용출실험을 시행한 결과 중금속이 미미하였다. 하수슬러지 케이크 및 음식물쓰레기와 고화재를 각각 혼합하여 7일 양생 후 토양성분실험을 한 결과 중금속 함량이 환경기준치 이하로 나타났다. 슬러지, 고화재 및 첨가제 혼합시료를 비이커에 혼합한 후 암모니아 농도를 측정한 결과 3일 후 0이 되었다.

• 동의생리병리학회지
• /
• 제25권5호
• /
• pp.823-829
• /
• 2011

This study was performed to obtain the good processing in the Rehmanniae Radix Preparata. In this study, we investigated the comparative analysis for steamed and hot-air dried Rehmanniae Radix Preparata. The results were obtained as follows : Through loss on drying analysis with each additional processing of Rehmanniae Radix preparata, there was gradual increase. Through ash analysis with each additional processing of Rehmanniae Radix preparata, there was slight increase. Rehmanniae Radix preparata had several inorganic components such as K, P, Mg, Ca, Cl, Al. P and Mg were increased gradually with each additional processing of Rehmanniae Radix Preparata. But Ca was decreased with each additional processing. We identitied 24 kinds of volatile components from extracts of various processed Rehmanniae Radix Preparata through componential analysis using GC/MS. From GC/MS analysis, we found out the content of 5-HMF Rehmanniae Radix Preparata steamed over 7 times was suitable. 5-HMF's content of 9 times steamed Rehmanniae Radix Preparata gained from GC/MS analysis is 70-fold higher than gained from HPLC. The more it is repeating steamed and hot-air dried, the more toxic volatile compound of Rehmanniae Radix Preparata is removed. Taken together, these results suggested that Rehmanniae Radix Preparata had component (especially 5-HMF) changes according to different processed steaming and hot-air drying.

• 한국잠사곤충학회지
• /
• 제9권
• /
• pp.39-42
• /
• 1969

1. 무기인은 전반적으로 5령 4일째 공히 감소하고 5령 4일째 증가 하였다가 다시 감소하고 연엽구에 가장 많았고 편엽 중엽 혼엽구어서는 별로 큰 차가 없음을 알수 있었다. 2. 유기인은 5령 1일째부터 5일째까지 계속 증가를 나타냈으나 경엽구 5령 3일째에 증가하고 그 후는 감소하여 5일째에 약간 증가함을 나타내고 중엽구와 혼엽구는 계속 증가함을 알수 있었다. 3. 총 인을 공히 5령 3일째까지 큰 변동이 없었으나 연엽구완 혼엽구에서는 5령 4일째 가장 많았고 5일째까지 변동이 없었으나 경엽구는 5령 3일 이후 5일에 이르기까지 감소하고 중엽구늘 5령 4일째 증가하고 그 후는 감소함 알수 있었다. 4 병잠에서는 무기인 유기인 총인 다같이 5령초기부터 감소함을 알 수 있었다.

• 한국재료학회지
• /
• 제3권4호
• /
• pp.352-360
• /
• 1993

열산화막위에 LPCVD법을 이용하여 질화막을 형성시킨 후, 질화막의 열처리 유무와 습식재산화처리의 공정조건에 따른 다양한 막의 두께를 가진 ONO(oxide nitride oxide)캐패시터를 제작하여 여러가지 물성을 조사하였다. 질화막을 습식산화처리하여 전체막의 굴절윷과 식각거동을 관찰한 결과, 40$\AA$두께의 질화막은 치밀하지 못하여 계속되는 산화공정동안에 하부층 산화막이 성장되었고 정전용량의 확보능력도 떨어졌다. ONO다층유전박막의 전도전류는 하부층 혹은 상부층 산화막의 두께가 증가함에 따라 감소하였다. 그러나 산화막이 50$\AA$ 이상인 경우에는 정전용량의 감소요인으로 작용할 뿐, hole유입에 대한 barrier역할은 크게 향상되지 못하였다. 산화전 질화막에 대한 열처리 효과는 막의 굴절율과 정전용량에 큰 영향을 주지 못하였으나 절연파괴전압은 약 2-3V 상승효과를 보였다.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.60-66
• /
• 2010

Zinc has a number of characteristics that make it well suited for use as a coating to protecting iron and steel products from corrosion. Its excellent corrosion resistance in most environments accounts for its successful use as a protective coating on a variety of products and in many exposure conditions. The excellent field performance of zinc coatings results from their ability to form dense, adherent films that corrode at a rate that ranges from 1% to 10% of the corrosion rate of ferrous materials, depending on the environment. Recently, EU RoHS and EU ELV prohibited the use of materials that adversely affect the environment, such as Pb, Hg, Cd, and $Cr^{+6}$. In this study, environmentally-friendly, Cr-free solutions (epoxy solution, acrylic solution, and urethane solution S-700) and organic/inorganic solution with Si; LRO-317) were used to evaluate the corrosion resistance of zinc-coated steel subjected to a saltwater spray for 72 hours. The coating of urethane solution (S-700) was best among the three kinds of solution with heat treatment during five minutes at $190^{\circ}F$. Test specimens with S-700 and LRO-317 coating were heat treated in a drying oven at 170, 180, 190, 200, and $210^{\circ}C$ for five minutes. The results show that the optimum corrosion resistance was $190^{\circ}C$ in EGI and $170^{\circ}C$ in HDGI, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.488-493
• /
• 2010

Geopolymer is a term covering a class of synthetic aluminosilicate materials with potential use in a number of areas, but mainly as a replacement for Portland cement. In this study, geopolymers with fly ash and meta kaolin were prepared using KOH as an alkali activator and water glass. The effect of water glass on the microstructures and the compressive strength of the geopolymer was investigated. As the amount of water glass increased, the dissolved inorganic binder particles in the geopolymers increased due to polymerization, resulting in a dense microstructure. The meta kaolin-based geopolymer showed a better extent of polymerization and densification than that of the fly ash-based geopolymer. XRD data also suggested that polymerization in meta kaolin-based geopolymers should be active resulting in the formation of an amorphous phase with an increasing amount of water glass. The compressive strength of the geopolymer was also dependent on the amount of water glass. The compressive strength of the geopolymers from both fly ash and meta kaolin increased with an increasing amount of water glass because water glass improved the extent of polymerization of the inorganic binder and resulted in a dense microstructure. However, the addition of water glass to the geopolymer did not seem to be effective for the improvement of compressive strength because the meta kaolin-based geopolymer mainly consisted of a clay component. For this reason, the fly ash-based geopolymer showed a higher value of compressive strength than the meta-kaolin geopolymer.