• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.265-274
• /
• 2011

The objective of this case study is to analyze how effectively KIA K5, which is a leading mid-size car brand, has positioned itself into the mid-size car market. Before KIA launched the K5, Sonata and SM5 were the leading brands in the mid-size car market. They had loyal customers who like their similar images. As many competitors keep launching new brands or new designs into the car industry, Sonata and SM5 were pressured to introduce new versions. But, the YF Sonata and the New SM5 failed to catch up with the new trends in the market. Whilst YF Sonata was perceived as too innovative, the New SM5 was treated as an old car by the target customers of the mid-size car. While the two leading brands struggled to attract customers, KIA K5 found a new market space by identifying and focusing on the lucrative replace and up-grade demand segment and filling the gap between the current product category values and the emerging mid-size car category values. The K5 found the right values that customers need and successfully articulated the values to the customers. This case study illustrates that a successful positioning strategy can be effectively employed to attract customers in the saturated car manufacturing industry. This case can be summarized as the successful positioning strategy of KIA K5 is comprised of four primary pillars: design innovation, market analysis, STP (segmentation, targeting, and positioning), and launch strategy. The KIA K5 case study provides valuable insights and implications for many other companies that are planning to find a proper positioning strategy for their own business.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2021

Recently, the range of utilization and demand for unmanned aerial vehicle (UAV) has been continuously increasing, and research on the construction of a separate operating system for low-altitude UAV is underway through the development of a management system separate from manned aircraft. Since low-altitude UAVs also fly in the airspace, it is essential to establish technical standards and certification systems necessary for the operation of the aircraft, and research on this is also in progress. If the operating standards and certification requirements of the aircraft are presented, a test method to confirm this should also be presented. In particular, the accuracy of small UAV's navigation required during flight is required to be more precise than that of a manned aircraft or a large UAV. It was necessary to calculate a separate navigation error. In this study, we presented a test method for deriving navigation errors that can be applied to UAVs that have difficulty in acquiring long-term operational data, which is different from existing manned aircraft, and conducted verification tests.

• Knowledge Management Research
• /
• v.25 no.1
• /
• pp.173-192
• /
• 2024

This study aims to understand the changes in the beauty industry due to the pandemic from the consumer's perspective based on consumers' opinions about their skin online before and after the pandemic. Furthermore, this study tries to derive strategies for companies and governments to support sustainable growth and innovation in the beauty industry. To this end, posts on social media from 2017 to 2022 that contained the keyword 'skin concerns' are collected, and after data preprocessing, 96,908 posts are used for the structural topic model. To examine whether consumers' interest areas related to skin change according to the pandemic situation, the analysis period is divided into 7 periods, and the variables that distinguish each stage are used as meta-variables for the structural topic model. As a result, it is found that consumers' interests can be divided into 22 topics, which can be categorized into four main categories: beauty manufacturing, beauty services, skin concerns, and other. The results of this study are expected to be utilized in construction of product development and marketing strategies of related companies and the establishment of economic support policies by the government in response to changes in demand in the beauty industry due to the pandemic.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.1
• /
• pp.73-97
• /
• 2007

R&D into future technologies should be conducted in conjunction with technological innovation strategies that are linked to corporate survival within a framework of information and knowledge-based competitiveness. As such, future technology strategies should be ensured through open R&D organizations. The development of future technologies should not be conducted simply on the basis of future forecasts, but should take into account customer needs in advance and reflect them in the development of the future technologies or services. This research aims to select as segmentation variables the customers' attitude towards accepting future telecommunication technologies and their value orientation in their everyday life, as these factors wilt have the greatest effect on the demand for future telecommunication services and thus segment the future telecom service market. Likewise, such research seeks to segment the market from the stage of technology R&D activities and employ the results to formulate technology development strategies. Based on the customer attitude towards accepting new technologies, two groups were induced, and a hierarchical customer segmentation model was provided to conduct secondary segmentation of the two groups on the basis of their respective customer value orientation. A survey was conducted in June 2006 on 800 consumers aged 15 to 69, residing in Seoul and five other major South Korean cities, through one-on-one interviews. The samples were divided into two sub-groups according to their level of acceptance of new technology; a sub-group demonstrating a high level of technology acceptance (39.4%) and another sub-group with a comparatively lower level of technology acceptance (60.6%). These two sub-groups were further divided each into 5 smaller sub-groups (10 total smaller sub-groups) through two rounds of segmentation. The ten sub-groups were then analyzed in their detailed characteristics, including general demographic characteristics, usage patterns in existing telecom services such as mobile service, broadband internet and wireless internet and the status of ownership of a computing or information device and the desire or intention to purchase one. Through these steps, we were able to statistically prove that each of these 10 sub-groups responded to telecom services as independent markets. We found that each segmented group responds as an independent individual market. Through correspondence analysis, the target segmentation groups were positioned in such a way as to facilitate the entry of future telecommunication services into the market, as well as their diffusion and transferability.

• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2019

Materials and Parts acts as the bridge in the manufacturing industry. In 2018, the materials and parts industry became the leading industry in Korea as its export reached $316.2 billion, accounting for 52.3 percent of the country's total exports. As such, it is the main industry of Korea leading the trade surplus, but when it comes to Japan, it is not. The trade deficit with Japan shrinks to $24 billion last year but the materials and parts industry still accounts for 60 percent of total deficit, which is about $15.1 billion. Today Japan has the top competitiveness in the high-tech materials and parts industry and the factors can be found in cooperation and symbiosis among companies, monotsukuri spirit, and long-term government policy. In order for Korean economy to pursue the Japan's high-tech materials and parts industry, the following change of perception is necessary. First, the material and parts industry requires win-win cooperation. In general, materials and parts are intermediate products. Therefore, it is important to understand the characterist that the transactions are all made up between companies not the with consumers. Second, expansion of joint technology development is absolutely necessary. South Korea is a leading country in the field of general-purpose materials and parts. However, the research shows that South Korea has structure which small and medium-sized companies could have difficulties in developing high-tech products as finding demand and developing market are hard due to low participation of large corporations at R&D stage. It is necessary for large corporations to participate in joint R&D and share opinions of customers from the beginning stage of R&D. Third, a long-term approach is needed. Structural vulnerabilities in the Korea's materials and parts industry, including the lack of advanced technologies is the main reason of solidification of Korea's trade deficit with Japan but there are also cultural differences about technology in the background. Even if it takes time, a long-term approach is absolutely necessary to build up technology and know-how in order to secure competitiveness in the high-tech materials and parts industry. This approach applies to act of corporation and government policy.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.49-65
• /
• 2018

For a long time the German economy was primarily defined by large corporations and thriving small and medium-sized enterprises. Since about 2005 a second strand has started to emerge and it is one which is becoming increasingly important and is creating jobs - start-ups in the digital sector. This start-up activity is taking an important role in Germany's economic development: Start-up companies spawn innovations and create jobs, thus promoting the concept of competition. In general "start-up" refers to digitally-driven companies that are not more than five years old. Germany's start-up policy consists of three main parts. First of all, Germany has the characteristics of technology-based start-ups. The Hartz reform since 2002 has shown its focus on technology-based start-ups. In particular, it is the most appropriate for a start-up company to take the role of a new technology company to respond to changes in the global industrial structure. Second, it is approaching from a long-term perspective. In this regard, the small business policy, including Germany's new business policy, is seen as a tradition that can be consistent and can make policy decisions based on the basics rather than following the times. Third, the government is implementing policies centered on demand. Germany's start-up policy is summarized as a technology-based policy and new job creation. The policy response is that the government seeks the best combination of policies by adapting them to the times from the broad trend of employment market policies. What is important here is that policies are made based on consumers, not suppliers, in the process of policy making and implementation. With the Digital Agenda 2020 the Federal government has likewise committed itself to preparing the digital economy for international competition and making Germany the "No. 1 digital growth country in Europe". Ever since 1998 the Federal Ministry for Economic Affairs and Energy (BMWi) has awarded the "EXIST" start-up scholarship to students and graduates. The Ministry also invests in the High Tech start-up fund. Together with Kreditanstalt für Wiederaufbau (KfW) and 18 other investors from the world of business the seed investor promotes young technology companies. Germany offers start-ups a good infrastructure and lots of funding opportunities. Berlin is regarded as Europe's start-up capital and also attracts lots of international young entrepreneurs.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.571-581
• /
• 2007

The mechanism of water pollution in Lake Shihwa, one of highly eutrophicated artificial lakes in Korea, has been studied using a numerical 3D physical-biochemical coupled model. In this study, the model was applied to estimate the contribution of land-based pollutant load to water quality of heavily polluted Lake Shihwa. The chemical oxygen demand(COD) was adopted as an index of the lake water quality, and the spatial distribution of an average COD concentration during the summer from 1999 to 2000 was simulated by the model. The simulated COD showed a good agreement with the observed data. According to reproducibility of COD, the high-est levels between 8 and 9 mg/L were shown at the inner site of the lake with inflow of many rivers and ditches, while the lowest was found to be about 5 mg/L at the southwestern site near to dike gate. In the pre-diction of water quality of Lake Shihwa, COD showed still higher levels than 3 mg/L in case of reduction of 95% for land-based pollutant load. This suggests that the curtailment of land-based pollutant load is not only sufficient but the improvement of sediment quality or the increase of seawater exchange should be considered together to improve a water quality in Lake Shihwa.

• Journal of Technology Innovation
• /
• v.25 no.2
• /
• pp.89-125
• /
• 2017

Complex product systems (CoPs) is a engineering-intensive products with high-ended design technology, which are closely linked with national economic growth and development of social infrastructures. Accordingly, in order to understand the technological evolution of CoPs, it is necessary to identify the macro-environmental drivers surrounding the CoPs and their impact on the technological evolution of the CoPS. Therefore, we investigate the effect of policy, economic and social drivers on the technological evolution of CoPS by implementing the longitudinal case study on nuclear power plant during the periods between 1950 and 2010s. Based on the analysis of various sources of secondary data and primary data through interviews, we found that the technological evolution of nuclear power plant is progressed as "Phase 1: Application research for peaceful utilization of nuclear energy" between 1950s and 1960s, "Phase 2: The first renaissance of nuclear energy" during 1970s, "Phase 3: Enhancement of safety and the catch-up of latecomers in nuclear energy" between 1990s and 2000s, and "Phase 4: Top prioritization of safety and the development of next generation reactors for the second renaissance of nuclear energy" since 2010s. We also found that various kinds of policy, economic and social drivers, such as energy policy, investment in technology development, economic growth and energy demand, social acceptability and environmental concern, have affected the technology evolution of nuclear power plant at each phase. We emphasize the role of macroenvironmental drivers in the technological evolution of CoPS. We also suggest that countries that endeavor to develop CoPs need to utilize those drivers for enhancing competitiveness and sustaining leadership.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.81-101
• /
• 2011

In today's rapidly changing and increasingly competitive business environment, new product development in tune with market trends in a timely manner has been a matter of the utmost concern for all enterprises. Indeed, developing a sustainable new business has been a top priority for not only business enterprises, but also for the government policy makers accountable for the health of Its national economy as well as for decision makers in what type of organizations. Further, for a soft landing of new businesses, building a government-initiated industry base has been claimed to be necessary as a way to effectively boost corporate activities. However, the existing methodology in new service and new product development is not suitable for nurturing industry, because it is mainly focused on the research and development of corporate business activities instead of new product development. The approach for developing new business is based on 'innovation' and 'convergence.' Yet, the convergence among technologies, supplies, businesses and industries is believed to be more effective than innovation alone as a way to gain momentum. Therefore, it has become more important than ever to study a new methodology based on convergence in industrial quality new product development (NPD) and new service development (NDS). In this research, therefore, we reviewed any restrictions in the existing new product and new service development methodology and the existing business model development methodology. In doing so, we conducted industry standard collaboration analysis on a new service model development methodology in the private sector and the public sector. This approach is fundamentally different from the existing one in that ours focuses on new business development under private management. The suggested framework can be categorized into industry level and service level. First, in the industry level, we define new business opportunities In occurrence of convergence between businesses. For this, we analyze the existing industry at the industry level to identify the opportunities in a market and its business attractiveness, based on which the convergence industry is formulated. Also, through the analysis of environment and market opportunity at the industry level. we can trace how different industries are lined to one another so as to extend the result of the study to develop better insights into industry expansion and new industry emergence. After then, in the service level, we elicit the service for the defined new business, which is composed of private service and supporting service for nurturing industry. Private service includes 3steps: plan-design-do; supporting service for nurturing industry has 4 steps: selection-make environment- business preparation-do and see. The existing methodology focuses on mainly securing business competitiveness, building a business model for success, and offering new services based on the core competence of companies. This suggested methodology, on other hand, suggests the necessity of service development, when new business opportunities arise, in relation to the opportunity analysis of supporting service based on the clear understanding of new business supporting infrastructure optimization. Meanwhile, we have performed case studies on the printing and publishing field with the restrict procedure and development system to assure the feasibility and practical application. Even though the printing and publishing industry is considered a typical knowledge convergence industry, it is also known as a low-demand and low-value industry in Korea. For this reason, we apply the new methodology and suggest the direction and the possibility of how the printing and publishing industry can be transformed as a core dynamic force for new growth. Then, we suggest the base composition service for industry promotion(public) and business opportunities for private's profitability(private).

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.